Change in coreboot[master]: mb/siemens/mc_ehl1: Enable LPSS UART

[9elements QA (Code Review)]

9elements QA has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/58049 )

Change subject: mb/siemens/mc_ehl1: Enable LPSS UART
......................................................................

Patch Set 2:

Automatic boot test returned (PASS/FAIL/TOTAL): 7 / 2 / 9

PASS: x86_32  "Hermes CFL" , build config PRODRIVE_HERMES 
     and payload TianoCore_UefiPayloadPkg : https://lava.9esec.io/r/80362
PASS: x86_32  "ThinkPad T500" , build config LENOVO_T500 
     and payload SeaBIOS : https://lava.9esec.io/r/80361
PASS: x86_32  "HP Z220 SFF Workstation" , build config HP_Z220_SFF_WORKSTATION 
     and payload LinuxBoot_BB_kexec : https://lava.9esec.io/r/80360
PASS: x86_64  "HP Compaq 8200 Elite SFF PC" , build config HP_COMPAQ_8200_ELITE_SFF_PC.X86_64 
     and payload TianoCore : https://lava.9esec.io/r/80359
PASS: x86_32  "HP Compaq 8200 Elite SFF PC" , build config HP_COMPAQ_8200_ELITE_SFF_PC 
     and payload TianoCore : https://lava.9esec.io/r/80358
PASS: x86_32  "QEMU x86 q35/ich9" , build config EMULATION_QEMU_X86_Q35_SMM_TSEG 
     and payload TianoCore : https://lava.9esec.io/r/80357
FAIL: x86_32  "QEMU x86 q35/ich9" , build config EMULATION_QEMU_X86_Q35_SMM_TSEG 
     and payload SeaBIOS : https://lava.9esec.io/r/80356
PASS: x86_32  "QEMU x86 q35/ich9" , build config EMULATION_QEMU_X86_Q35 
     and payload TianoCore : https://lava.9esec.io/r/80355
FAIL: x86_32  "QEMU x86 q35/ich9" , build config EMULATION_QEMU_X86_Q35 
     and payload SeaBIOS : https://lava.9esec.io/r/80354

Please note: This test is under development and might not be accurate at all!