Change in coreboot[master]: soc/intel/common/cse: Add `finalize` operation for CSE

[Sridhar Siricilla (Code Review)]

Attention is currently required from: Arthur Heymans, Felix Singer, Subrata Banik, Tim Wawrzynczak, Angel Pons, Lean Sheng Tan, Werner Zeh, Patrick Rudolph, EricR Lai.
Sridhar Siricilla has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/60405 )

Change subject: soc/intel/common/cse: Add `finalize` operation for CSE
......................................................................

Patch Set 24:

(1 comment)

File src/soc/intel/common/block/cse/cse.c:

https://review.coreboot.org/c/coreboot/+/60405/comment/614f4a92_f1c6103c 
PS24, Line 1195: static void cse_final(struct device *dev)
               : {
               : 	if (CONFIG(SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT)) {
               : 		cse_send_end_of_post();
               : 
               : 		cse_control_global_reset_lock();
               : 
               : 		if (CONFIG(DISABLE_HECI1_AT_PRE_BOOT)) {
               : 			cse_set_to_d0i3();
               : 			heci1_disable();
               : 		}
               : 	}
               : 
               : 	if (CONFIG(SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE))
               : 		heci_set_to_d0i3();
               : }
What if we aggregate both operations covered by SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT & SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE under single macro (like CB_INTEL_SOC_RUN_OPS_BEFORE_PAYLOAD_LAUNCH?)?