Change in coreboot[master]: sb/amd/pi/hudson/early_init: fix setting SPI_USE_SPI100 in SPI100_ENABLE

[Felix Held (Code Review)]

Attention is currently required from: Michał Kopeć, Felix Held.
Hello build bot (Jenkins), Michał Żygowski, Marshall Dawson, Michał Kopeć,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/59934

to look at the new patch set (#3).

Change subject: sb/amd/pi/hudson/early_init: fix setting SPI_USE_SPI100 in SPI100_ENABLE
......................................................................

sb/amd/pi/hudson/early_init: fix setting SPI_USE_SPI100 in SPI100_ENABLE

Use a read modify write sequence when setting the SPI_USE_SPI100 bit in
the SPI100_ENABLE register. This avoids clearing other bits in the
register which might cause instabilities. Haven't checked the reference
code, but the register descriptions suggested that the register in
Mullins behaves similar to the one in Stoneyridge. Right now this code
is unused, but it's probably still a good idea to fix it.

TEST=Booting Debian 11 with kernel 5.10 on apu2 still works when adding
a call to hudson_set_spi100 with this patch applied.

Signed-off-by: Felix Held 
Change-Id: Ifbd960a9509542b28f03326a3066995540260bef
Tested-by: Michał Żygowski 
---
M src/southbridge/amd/pi/hudson/early_setup.c
1 file changed, 2 insertions(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/34/59934/3