Philipp Deppenwiese (zaolin@das-labor.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7098
-gerrit
commit e2b0aa8836b4c0fc1c8a5838406b5a2685996be9 Author: Nicolas Reinecke nr@das-labor.org Date: Fri Oct 17 12:08:05 2014 +0200
lenovo/t520: Use native raminit over MRC blob
Native raminit for sandy/ivybridge was introduced in:
7686a56 sandy/ivybridge: Native raminit.
An additional current level is needed.
Change-Id: Ied73d168045c25d37afa5d9d7073de7f9c6435c7 Signed-off-by: Nicolas Reinecke nr@das-labor.org Signed-off-by: Philipp Deppenwiese zaolin@das-labor.org --- src/mainboard/lenovo/t520/Kconfig | 10 +- src/mainboard/lenovo/t520/romstage.c | 111 ++++++----------------- src/southbridge/intel/bd82x6x/early_usb_native.c | 2 +- 3 files changed, 31 insertions(+), 92 deletions(-)
diff --git a/src/mainboard/lenovo/t520/Kconfig b/src/mainboard/lenovo/t520/Kconfig index 9e280d4..f204158 100644 --- a/src/mainboard/lenovo/t520/Kconfig +++ b/src/mainboard/lenovo/t520/Kconfig @@ -4,8 +4,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select SYSTEM_TYPE_LAPTOP select CPU_INTEL_SOCKET_RPGA988B - select NORTHBRIDGE_INTEL_SANDYBRIDGE - select SOUTHBRIDGE_INTEL_BD82X6X + select NORTHBRIDGE_INTEL_SANDYBRIDGE_NATIVE + select SOUTHBRIDGE_INTEL_C216 select EC_LENOVO_PMH7 select EC_LENOVO_H8 select BOARD_ROMSIZE_KB_8192 @@ -21,7 +21,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
config HAVE_MRC_CACHE bool - default n + default y
config HAVE_IFD_BIN bool @@ -47,10 +47,6 @@ config MMCONF_BASE_ADDRESS hex default 0xf0000000
-config CACHE_ROM_SIZE_OVERRIDE - hex - default 0x800000 - config IRQ_SLOT_COUNT int default 18 diff --git a/src/mainboard/lenovo/t520/romstage.c b/src/mainboard/lenovo/t520/romstage.c index a0cbad5..4d1684d 100644 --- a/src/mainboard/lenovo/t520/romstage.c +++ b/src/mainboard/lenovo/t520/romstage.c @@ -33,7 +33,7 @@ #include <cbmem.h> #include <console/console.h> #include <northbridge/intel/sandybridge/sandybridge.h> -#include <northbridge/intel/sandybridge/raminit.h> +#include <northbridge/intel/sandybridge/raminit_native.h> #include <southbridge/intel/bd82x6x/pch.h> #include <southbridge/intel/bd82x6x/gpio.h> #include <arch/cpu.h> @@ -112,62 +112,14 @@ static void rcba_config(void) #include <cpu/intel/romstage.h> void main(unsigned long bist) { - int boot_mode = 0; - int cbmem_was_initted; + int s3resume = 0; + spd_raw_data spd[4];
if (MCHBAR16(SSKPD) == 0xCAFE) { outb(0x6, 0xcf9); hlt (); }
- struct pei_data pei_data = { - .pei_version = PEI_VERSION, - .mchbar = DEFAULT_MCHBAR, - .dmibar = DEFAULT_DMIBAR, - .epbar = DEFAULT_EPBAR, - .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, - .smbusbar = SMBUS_IO_BASE, - .wdbbar = 0x4000000, - .wdbsize = 0x1000, - .hpet_address = CONFIG_HPET_ADDRESS, - .rcba = DEFAULT_RCBABASE, - .pmbase = DEFAULT_PMBASE, - .gpiobase = DEFAULT_GPIOBASE, - .thermalbase = 0xfed08000, - .system_type = 0, // 0 Mobile, 1 Desktop/Server - .tseg_size = CONFIG_SMM_TSEG_SIZE, - .spd_addresses = { 0xA0, 0x00,0xA2,0x00 }, - .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, - .ec_present = 1, - .gbe_enable = 1, - .ddr3lv_support = 0, - // 0 = leave channel enabled - // 1 = disable dimm 0 on channel - // 2 = disable dimm 1 on channel - // 3 = disable dimm 0+1 on channel - .dimm_channel0_disabled = 2, - .dimm_channel1_disabled = 2, - .max_ddr3_freq = 1600, - .usb_port_config = { - /* enabled usb oc pin length */ - { 1, 0, 0x0080 }, /* P0 left dual conn, OC 0 */ - { 1, 1, 0x0080 }, /* P1 System onboard USB port (eSATA) (EHCI debug), OC 1 */ - { 1, 0, 0x0040 }, /* P2: wimax / wlan */ - { 1, 0, 0x0040 }, /* P3: wwan, no OC */ - { 1, 0, 0x0040 }, /* P4: smartcard, otherwise empty */ - { 1, 0, 0x0080 }, /* P5: Expresscard, no OC */ - { 0, 0, 0x0000 }, /* P6: empty */ - { 1, 0, 0x0080 }, /* P7: to touch panel, no OC */ - { 1, 4, 0x0080 }, /* P8: left dual conn, OC4 */ - { 1, 5, 0x0080 }, /* P9: to system subcard back right (EHCI debug), OC 5 */ - { 1, 0, 0x0040 }, /* P10: fingerprint reader, no OC */ - { 1, 0, 0x0040 }, /* P11: bluetooth, no OC. */ - { 1, 0, 0x0080 }, /* P12: dock, no OC */ - { 1, 0, 0x0080 }, /* P13: webcam, no OC */ - }, - .ddr_refresh_rate_config = 2, /* Force double refresh rate */ - }; - timestamp_init(get_initial_timestamp()); timestamp_add_now(TS_START_ROMSTAGE);
@@ -182,6 +134,23 @@ void main(unsigned long bist)
setup_pch_gpios(&t520_gpio_map);
+ early_usb_init((struct southbridge_usb_port []) { + { 1, 1, 0 }, /* P0 left dual conn, OC 0 */ + { 1, 1, 1 }, /* P1 system onboard USB port (eSATA), (EHCI debug), OC 1 */ + { 1, 2, -1 }, /* P2: wimax / WLAN */ + { 1, 1, -1 }, /* P3: WWAN, no OC */ + { 1, 1, -1 }, /* P4: smartcard, no OC */ + { 1, 1, -1 }, /* P5: ExpressCard, no OC */ + { 0, 2, -1 }, /* P6: empty */ + { 0, 2, -1 }, /* P7: to touch panel, no OC */ + { 1, 1, 4 }, /* P8: left dual conn, OC4 */ + { 1, 4, 5 }, /* P9: to system subcard back right, (EHCI debug), OC 5 */ + { 1, 1, -1 }, /* P10: fingerprint reader, no OC */ + { 1, 2, -1 }, /* P11: bluetooth, no OC. */ + { 1, 1, -1 }, /* P12: docking, no OC */ + { 1, 1, -1 }, /* P13: CAMERA (LCD), no OC */ + }); + /* Initialize console device(s) */ console_init();
@@ -194,35 +163,22 @@ void main(unsigned long bist) sandybridge_early_initialization(SANDYBRIDGE_MOBILE); printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n");
- boot_mode = southbridge_detect_s3_resume() ? 2 : 0; + s3resume = southbridge_detect_s3_resume();
post_code(0x38); /* Enable SPD ROMs and DDR-III DRAM */ enable_smbus();
- /* Prepare USB controller early in S3 resume */ - if (boot_mode == 2) - enable_usb_bar(); - post_code(0x39); - post_code(0x3a);
- pei_data.boot_mode = boot_mode; + post_code(0x3a); timestamp_add_now(TS_BEFORE_INITRAM);
- /* MRC.bin has a bug and sometimes halts (instead of reboot?). - */ - if (boot_mode != 2) { - RCBA32(GCS) = RCBA32(GCS) & ~(1 << 5); /* reset */ - outw((0 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* let timer go */ - } - - sdram_initialize(&pei_data); + memset(spd, 0, sizeof(spd)); + read_spd(&spd[0], 0x50); + read_spd(&spd[2], 0x51);
- if (boot_mode != 2) { - RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */ - outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ - } + init_dram_ddr3(spd, 1, TCK_800MHZ, s3resume);
timestamp_add_now(TS_AFTER_INITRAM); post_code(0x3c); @@ -230,20 +186,7 @@ void main(unsigned long bist) rcba_config(); post_code(0x3d);
- quick_ram_check(); - post_code(0x3e); - - cbmem_was_initted = !cbmem_recovery(boot_mode == 2); - if (boot_mode != 2) { - save_mrc_data(&pei_data); - } - - if (boot_mode==2 && !cbmem_was_initted) { - /* Failed S3 resume, reset to come up cleanly */ - outb(0x6, 0xcf9); - hlt(); - } - northbridge_romstage_finalize(boot_mode==2); + northbridge_romstage_finalize(s3resume);
post_code(0x3f); timestamp_add_now(TS_END_ROMSTAGE); diff --git a/src/southbridge/intel/bd82x6x/early_usb_native.c b/src/southbridge/intel/bd82x6x/early_usb_native.c index 2afe8d3..7ce5574 100644 --- a/src/southbridge/intel/bd82x6x/early_usb_native.c +++ b/src/southbridge/intel/bd82x6x/early_usb_native.c @@ -33,7 +33,7 @@ early_usb_init (const struct southbridge_usb_port *portmap) /* 3560 */ 0x024c8001, 0x000024a3, 0x00040002, 0x01000050, /* 3570 */ 0x02000772, 0x16000f9f, 0x1800ff4f, 0x0001d630, }; - const u32 currents[] = { 0x20000153, 0x20000f57, 0x2000055b, 0x20000f51 }; + const u32 currents[] = { 0x20000153, 0x20000f57, 0x2000055b, 0x20000f51 , 0x2000094a }; int i; /* Activate PMBAR. */ pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1);
-
Philipp Deppenwiese