New patch to review for coreboot: 99d552c southbridge/intel/lynxpoint: Remove a trailing whitespace
HAOUAS Elyes (ehaouas@noos.fr) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6342
-gerrit
commit 99d552cf2085ff27e8d5405e0697d97823f03909 Author: Elyes HAOUAS ehaouas@noos.fr Date: Tue Jul 22 19:53:54 2014 +0200
southbridge/intel/lynxpoint: Remove a trailing whitespace
Change-Id: If6fdfbcde9e5b6d3167f082b55cc0c6617c5d6a0 Signed-off-by: Elyes HAOUAS ehaouas@noos.fr --- src/southbridge/intel/lynxpoint/hda_verb.h | 6 +- src/southbridge/intel/lynxpoint/me.h | 202 ++++++++--------- src/southbridge/intel/lynxpoint/pch.h | 338 ++++++++++++++--------------- 3 files changed, 273 insertions(+), 273 deletions(-)
diff --git a/src/southbridge/intel/lynxpoint/hda_verb.h b/src/southbridge/intel/lynxpoint/hda_verb.h index 8b3d27e..b0e9d9f 100644 --- a/src/southbridge/intel/lynxpoint/hda_verb.h +++ b/src/southbridge/intel/lynxpoint/hda_verb.h @@ -22,13 +22,13 @@
#define HDA_GCAP_REG 0x00 #define HDA_GCTL_REG 0x08 -#define HDA_GCTL_CRST (1 << 0) +#define HDA_GCTL_CRST (1 << 0) #define HDA_STATESTS_REG 0x0e #define HDA_IC_REG 0x60 #define HDA_IR_REG 0x64 #define HDA_ICII_REG 0x68 -#define HDA_ICII_BUSY (1 << 0) -#define HDA_ICII_VALID (1 << 1) +#define HDA_ICII_BUSY (1 << 0) +#define HDA_ICII_VALID (1 << 1)
int hda_codec_detect(u32 base); int hda_codec_write(u32 base, u32 size, const u32 *data); diff --git a/src/southbridge/intel/lynxpoint/me.h b/src/southbridge/intel/lynxpoint/me.h index a72778b..c63c866 100644 --- a/src/southbridge/intel/lynxpoint/me.h +++ b/src/southbridge/intel/lynxpoint/me.h @@ -34,37 +34,37 @@ #define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */
#define PCI_ME_HFS 0x40 -#define ME_HFS_CWS_RESET 0 -#define ME_HFS_CWS_INIT 1 -#define ME_HFS_CWS_REC 2 -#define ME_HFS_CWS_NORMAL 5 -#define ME_HFS_CWS_WAIT 6 -#define ME_HFS_CWS_TRANS 7 -#define ME_HFS_CWS_INVALID 8 -#define ME_HFS_STATE_PREBOOT 0 -#define ME_HFS_STATE_M0_UMA 1 -#define ME_HFS_STATE_M3 4 -#define ME_HFS_STATE_M0 5 -#define ME_HFS_STATE_BRINGUP 6 -#define ME_HFS_STATE_ERROR 7 -#define ME_HFS_ERROR_NONE 0 -#define ME_HFS_ERROR_UNCAT 1 -#define ME_HFS_ERROR_IMAGE 3 -#define ME_HFS_ERROR_DEBUG 4 -#define ME_HFS_MODE_NORMAL 0 -#define ME_HFS_MODE_DEBUG 2 -#define ME_HFS_MODE_DIS 3 -#define ME_HFS_MODE_OVER_JMPR 4 -#define ME_HFS_MODE_OVER_MEI 5 -#define ME_HFS_BIOS_DRAM_ACK 1 -#define ME_HFS_ACK_NO_DID 0 -#define ME_HFS_ACK_RESET 1 -#define ME_HFS_ACK_PWR_CYCLE 2 -#define ME_HFS_ACK_S3 3 -#define ME_HFS_ACK_S4 4 -#define ME_HFS_ACK_S5 5 -#define ME_HFS_ACK_GBL_RESET 6 -#define ME_HFS_ACK_CONTINUE 7 +#define ME_HFS_CWS_RESET 0 +#define ME_HFS_CWS_INIT 1 +#define ME_HFS_CWS_REC 2 +#define ME_HFS_CWS_NORMAL 5 +#define ME_HFS_CWS_WAIT 6 +#define ME_HFS_CWS_TRANS 7 +#define ME_HFS_CWS_INVALID 8 +#define ME_HFS_STATE_PREBOOT 0 +#define ME_HFS_STATE_M0_UMA 1 +#define ME_HFS_STATE_M3 4 +#define ME_HFS_STATE_M0 5 +#define ME_HFS_STATE_BRINGUP 6 +#define ME_HFS_STATE_ERROR 7 +#define ME_HFS_ERROR_NONE 0 +#define ME_HFS_ERROR_UNCAT 1 +#define ME_HFS_ERROR_IMAGE 3 +#define ME_HFS_ERROR_DEBUG 4 +#define ME_HFS_MODE_NORMAL 0 +#define ME_HFS_MODE_DEBUG 2 +#define ME_HFS_MODE_DIS 3 +#define ME_HFS_MODE_OVER_JMPR 4 +#define ME_HFS_MODE_OVER_MEI 5 +#define ME_HFS_BIOS_DRAM_ACK 1 +#define ME_HFS_ACK_NO_DID 0 +#define ME_HFS_ACK_RESET 1 +#define ME_HFS_ACK_PWR_CYCLE 2 +#define ME_HFS_ACK_S3 3 +#define ME_HFS_ACK_S4 4 +#define ME_HFS_ACK_S5 5 +#define ME_HFS_ACK_GBL_RESET 6 +#define ME_HFS_ACK_CONTINUE 7
struct me_hfs { u32 working_state: 4; @@ -93,11 +93,11 @@ struct me_uma { } __attribute__ ((packed));
#define PCI_ME_H_GS 0x4c -#define ME_INIT_DONE 1 -#define ME_INIT_STATUS_SUCCESS 0 -#define ME_INIT_STATUS_NOMEM 1 -#define ME_INIT_STATUS_ERROR 2 -#define ME_INIT_STATUS_SUCCESS_OTHER 3 /* SEE ME9 BWG */ +#define ME_INIT_DONE 1 +#define ME_INIT_STATUS_SUCCESS 0 +#define ME_INIT_STATUS_NOMEM 1 +#define ME_INIT_STATUS_ERROR 2 +#define ME_INIT_STATUS_SUCCESS_OTHER 3 /* SEE ME9 BWG */
struct me_did { u32 uma_base: 16; @@ -113,73 +113,73 @@ struct me_did { */ #define PCI_ME_HFS2 0x48 /* Infrastructure Progress Values */ -#define ME_HFS2_PHASE_ROM 0 -#define ME_HFS2_PHASE_BUP 1 -#define ME_HFS2_PHASE_UKERNEL 2 -#define ME_HFS2_PHASE_POLICY 3 -#define ME_HFS2_PHASE_MODULE_LOAD 4 -#define ME_HFS2_PHASE_UNKNOWN 5 -#define ME_HFS2_PHASE_HOST_COMM 6 +#define ME_HFS2_PHASE_ROM 0 +#define ME_HFS2_PHASE_BUP 1 +#define ME_HFS2_PHASE_UKERNEL 2 +#define ME_HFS2_PHASE_POLICY 3 +#define ME_HFS2_PHASE_MODULE_LOAD 4 +#define ME_HFS2_PHASE_UNKNOWN 5 +#define ME_HFS2_PHASE_HOST_COMM 6 /* Current State - Based on Infra Progress values. */ /* ROM State */ -#define ME_HFS2_STATE_ROM_BEGIN 0 -#define ME_HFS2_STATE_ROM_DISABLE 6 +#define ME_HFS2_STATE_ROM_BEGIN 0 +#define ME_HFS2_STATE_ROM_DISABLE 6 /* BUP State */ -#define ME_HFS2_STATE_BUP_INIT 0 -#define ME_HFS2_STATE_BUP_DIS_HOST_WAKE 1 -#define ME_HFS2_STATE_BUP_FLOW_DET 4 -#define ME_HFS2_STATE_BUP_VSCC_ERR 8 -#define ME_HFS2_STATE_BUP_CHECK_STRAP 0xa -#define ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT 0xb -#define ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP 0xd -#define ME_HFS2_STATE_BUP_M3 0x11 -#define ME_HFS2_STATE_BUP_M0 0x12 -#define ME_HFS2_STATE_BUP_FLOW_DET_ERR 0x13 -#define ME_HFS2_STATE_BUP_M3_CLK_ERR 0x15 -#define ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING 0x17 -#define ME_HFS2_STATE_BUP_M3_KERN_LOAD 0x18 -#define ME_HFS2_STATE_BUP_T32_MISSING 0x1c -#define ME_HFS2_STATE_BUP_WAIT_DID 0x1f -#define ME_HFS2_STATE_BUP_WAIT_DID_FAIL 0x20 -#define ME_HFS2_STATE_BUP_DID_NO_FAIL 0x21 -#define ME_HFS2_STATE_BUP_ENABLE_UMA 0x22 -#define ME_HFS2_STATE_BUP_ENABLE_UMA_ERR 0x23 -#define ME_HFS2_STATE_BUP_SEND_DID_ACK 0x24 -#define ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR 0x25 -#define ME_HFS2_STATE_BUP_M0_CLK 0x26 -#define ME_HFS2_STATE_BUP_M0_CLK_ERR 0x27 -#define ME_HFS2_STATE_BUP_TEMP_DIS 0x28 -#define ME_HFS2_STATE_BUP_M0_KERN_LOAD 0x32 +#define ME_HFS2_STATE_BUP_INIT 0 +#define ME_HFS2_STATE_BUP_DIS_HOST_WAKE 1 +#define ME_HFS2_STATE_BUP_FLOW_DET 4 +#define ME_HFS2_STATE_BUP_VSCC_ERR 8 +#define ME_HFS2_STATE_BUP_CHECK_STRAP 0xa +#define ME_HFS2_STATE_BUP_PWR_OK_TIMEOUT 0xb +#define ME_HFS2_STATE_BUP_MANUF_OVRD_STRAP 0xd +#define ME_HFS2_STATE_BUP_M3 0x11 +#define ME_HFS2_STATE_BUP_M0 0x12 +#define ME_HFS2_STATE_BUP_FLOW_DET_ERR 0x13 +#define ME_HFS2_STATE_BUP_M3_CLK_ERR 0x15 +#define ME_HFS2_STATE_BUP_CPU_RESET_DID_TIMEOUT_MEM_MISSING 0x17 +#define ME_HFS2_STATE_BUP_M3_KERN_LOAD 0x18 +#define ME_HFS2_STATE_BUP_T32_MISSING 0x1c +#define ME_HFS2_STATE_BUP_WAIT_DID 0x1f +#define ME_HFS2_STATE_BUP_WAIT_DID_FAIL 0x20 +#define ME_HFS2_STATE_BUP_DID_NO_FAIL 0x21 +#define ME_HFS2_STATE_BUP_ENABLE_UMA 0x22 +#define ME_HFS2_STATE_BUP_ENABLE_UMA_ERR 0x23 +#define ME_HFS2_STATE_BUP_SEND_DID_ACK 0x24 +#define ME_HFS2_STATE_BUP_SEND_DID_ACK_ERR 0x25 +#define ME_HFS2_STATE_BUP_M0_CLK 0x26 +#define ME_HFS2_STATE_BUP_M0_CLK_ERR 0x27 +#define ME_HFS2_STATE_BUP_TEMP_DIS 0x28 +#define ME_HFS2_STATE_BUP_M0_KERN_LOAD 0x32 /* Policy Module State */ -#define ME_HFS2_STATE_POLICY_ENTRY 0 -#define ME_HFS2_STATE_POLICY_RCVD_S3 3 -#define ME_HFS2_STATE_POLICY_RCVD_S4 4 -#define ME_HFS2_STATE_POLICY_RCVD_S5 5 -#define ME_HFS2_STATE_POLICY_RCVD_UPD 6 -#define ME_HFS2_STATE_POLICY_RCVD_PCR 7 -#define ME_HFS2_STATE_POLICY_RCVD_NPCR 8 -#define ME_HFS2_STATE_POLICY_RCVD_HOST_WAKE 9 -#define ME_HFS2_STATE_POLICY_RCVD_AC_DC 0xa -#define ME_HFS2_STATE_POLICY_RCVD_DID 0xb -#define ME_HFS2_STATE_POLICY_VSCC_NOT_FOUND 0xc -#define ME_HFS2_STATE_POLICY_VSCC_INVALID 0xd -#define ME_HFS2_STATE_POLICY_FPB_ERR 0xe -#define ME_HFS2_STATE_POLICY_DESCRIPTOR_ERR 0xf -#define ME_HFS2_STATE_POLICY_VSCC_NO_MATCH 0x10 +#define ME_HFS2_STATE_POLICY_ENTRY 0 +#define ME_HFS2_STATE_POLICY_RCVD_S3 3 +#define ME_HFS2_STATE_POLICY_RCVD_S4 4 +#define ME_HFS2_STATE_POLICY_RCVD_S5 5 +#define ME_HFS2_STATE_POLICY_RCVD_UPD 6 +#define ME_HFS2_STATE_POLICY_RCVD_PCR 7 +#define ME_HFS2_STATE_POLICY_RCVD_NPCR 8 +#define ME_HFS2_STATE_POLICY_RCVD_HOST_WAKE 9 +#define ME_HFS2_STATE_POLICY_RCVD_AC_DC 0xa +#define ME_HFS2_STATE_POLICY_RCVD_DID 0xb +#define ME_HFS2_STATE_POLICY_VSCC_NOT_FOUND 0xc +#define ME_HFS2_STATE_POLICY_VSCC_INVALID 0xd +#define ME_HFS2_STATE_POLICY_FPB_ERR 0xe +#define ME_HFS2_STATE_POLICY_DESCRIPTOR_ERR 0xf +#define ME_HFS2_STATE_POLICY_VSCC_NO_MATCH 0x10 /* Current PM Event Values */ -#define ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE 0 -#define ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR 1 -#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET 2 -#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR 3 -#define ME_HFS2_PMEVENT_CLEAN_ME_RESET 4 -#define ME_HFS2_PMEVENT_ME_RESET_EXCEPTION 5 -#define ME_HFS2_PMEVENT_PSEUDO_ME_RESET 6 -#define ME_HFS2_PMEVENT_S0MO_SXM3 7 -#define ME_HFS2_PMEVENT_SXM3_S0M0 8 -#define ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET 9 -#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3 0xa -#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF 0xb -#define ME_HFS2_PMEVENT_SXMX_SXMOFF 0xc +#define ME_HFS2_PMEVENT_CLEAN_MOFF_MX_WAKE 0 +#define ME_HFS2_PMEVENT_MOFF_MX_WAKE_ERROR 1 +#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET 2 +#define ME_HFS2_PMEVENT_CLEAN_GLOBAL_RESET_ERROR 3 +#define ME_HFS2_PMEVENT_CLEAN_ME_RESET 4 +#define ME_HFS2_PMEVENT_ME_RESET_EXCEPTION 5 +#define ME_HFS2_PMEVENT_PSEUDO_ME_RESET 6 +#define ME_HFS2_PMEVENT_S0MO_SXM3 7 +#define ME_HFS2_PMEVENT_SXM3_S0M0 8 +#define ME_HFS2_PMEVENT_NON_PWR_CYCLE_RESET 9 +#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_M3 0xa +#define ME_HFS2_PMEVENT_PWR_CYCLE_RESET_MOFF 0xb +#define ME_HFS2_PMEVENT_SXMX_SXMOFF 0xc
struct me_hfs2 { u32 bist_in_progress: 1; @@ -199,11 +199,11 @@ struct me_hfs2 { } __attribute__ ((packed));
#define PCI_ME_H_GS2 0x70 -#define PCI_ME_MBP_GIVE_UP 0x01 +#define PCI_ME_MBP_GIVE_UP 0x01
#define PCI_ME_HERES 0xbc -#define PCI_ME_EXT_SHA1 0x00 -#define PCI_ME_EXT_SHA256 0x02 +#define PCI_ME_EXT_SHA1 0x00 +#define PCI_ME_EXT_SHA256 0x02 #define PCI_ME_HER(x) (0xc0+(4*(x)))
struct me_heres { diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index 9b5cb6f..2614126 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -98,13 +98,13 @@ void usb_xhci_route_all(void);
/* State Machine configuration. */ #define RCBA_REG_SIZE_MASK 0x8000 -#define RCBA_REG_SIZE_16 0x8000 -#define RCBA_REG_SIZE_32 0x0000 +#define RCBA_REG_SIZE_16 0x8000 +#define RCBA_REG_SIZE_32 0x0000 #define RCBA_COMMAND_MASK 0x000f -#define RCBA_COMMAND_SET 0x0001 -#define RCBA_COMMAND_READ 0x0002 -#define RCBA_COMMAND_RMW 0x0003 -#define RCBA_COMMAND_END 0x0007 +#define RCBA_COMMAND_SET 0x0001 +#define RCBA_COMMAND_READ 0x0002 +#define RCBA_COMMAND_RMW 0x0003 +#define RCBA_COMMAND_END 0x0007
#define RCBA_ENCODE_COMMAND(command_, reg_, mask_, or_value_) \ { .command = command_, \ @@ -231,13 +231,13 @@ void pch_enable_lpc(void); #define SECSTS 0x1e #define INTR 0x3c #define BCTRL 0x3e -#define SBR (1 << 6) -#define SEE (1 << 1) -#define PERE (1 << 0) +#define SBR (1 << 6) +#define SEE (1 << 1) +#define PERE (1 << 0)
/* Power Management Control and Status */ #define PCH_PCS 0x84 -#define PCH_PCS_PS_D3HOT 3 +#define PCH_PCS_PS_D3HOT 3
#define PCH_EHCI1_DEV PCI_DEV(0, 0x1d, 0) #define PCH_EHCI2_DEV PCI_DEV(0, 0x1a, 0) @@ -253,8 +253,8 @@ void pch_enable_lpc(void); #define GEN_PMCON_2 0xa2 #define GEN_PMCON_3 0xa4 #define PMIR 0xac -#define PMIR_CF9LOCK (1 << 31) -#define PMIR_CF9GR (1 << 20) +#define PMIR_CF9LOCK (1 << 31) +#define PMIR_CF9GR (1 << 20)
/* GEN_PMCON_3 bits */ #define RTC_BATTERY_DEAD (1 << 2) @@ -263,7 +263,7 @@ void pch_enable_lpc(void);
#define PMBASE 0x40 #define ACPI_CNTL 0x44 -#define ACPI_EN (1 << 7) +#define ACPI_EN (1 << 7) #define BIOS_CNTL 0xDC #define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ #define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ @@ -280,16 +280,16 @@ void pch_enable_lpc(void);
#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */ #define LPC_EN 0x82 /* LPC IF Enables Register */ -#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */ -#define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */ -#define MC_LPC_EN (1 << 11) /* 0x62/0x66 */ -#define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */ -#define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */ -#define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */ -#define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */ -#define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */ -#define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */ -#define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[2:0] */ +#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */ +#define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */ +#define MC_LPC_EN (1 << 11) /* 0x62/0x66 */ +#define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */ +#define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */ +#define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */ +#define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */ +#define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */ +#define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */ +#define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[2:0] */ #define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */ #define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */ #define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ @@ -302,48 +302,48 @@ void pch_enable_lpc(void); #define PCH_SATA2_DEV PCI_DEV(0, 0x1f, 5) #define INTR_LN 0x3c #define IDE_TIM_PRI 0x40 /* IDE timings, primary */ -#define IDE_DECODE_ENABLE (1 << 15) -#define IDE_SITRE (1 << 14) -#define IDE_ISP_5_CLOCKS (0 << 12) -#define IDE_ISP_4_CLOCKS (1 << 12) -#define IDE_ISP_3_CLOCKS (2 << 12) -#define IDE_RCT_4_CLOCKS (0 << 8) -#define IDE_RCT_3_CLOCKS (1 << 8) -#define IDE_RCT_2_CLOCKS (2 << 8) -#define IDE_RCT_1_CLOCKS (3 << 8) -#define IDE_DTE1 (1 << 7) -#define IDE_PPE1 (1 << 6) -#define IDE_IE1 (1 << 5) -#define IDE_TIME1 (1 << 4) -#define IDE_DTE0 (1 << 3) -#define IDE_PPE0 (1 << 2) -#define IDE_IE0 (1 << 1) -#define IDE_TIME0 (1 << 0) +#define IDE_DECODE_ENABLE (1 << 15) +#define IDE_SITRE (1 << 14) +#define IDE_ISP_5_CLOCKS (0 << 12) +#define IDE_ISP_4_CLOCKS (1 << 12) +#define IDE_ISP_3_CLOCKS (2 << 12) +#define IDE_RCT_4_CLOCKS (0 << 8) +#define IDE_RCT_3_CLOCKS (1 << 8) +#define IDE_RCT_2_CLOCKS (2 << 8) +#define IDE_RCT_1_CLOCKS (3 << 8) +#define IDE_DTE1 (1 << 7) +#define IDE_PPE1 (1 << 6) +#define IDE_IE1 (1 << 5) +#define IDE_TIME1 (1 << 4) +#define IDE_DTE0 (1 << 3) +#define IDE_PPE0 (1 << 2) +#define IDE_IE0 (1 << 1) +#define IDE_TIME0 (1 << 0) #define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ -#define IDE_SSDE1 (1 << 3) -#define IDE_SSDE0 (1 << 2) -#define IDE_PSDE1 (1 << 1) -#define IDE_PSDE0 (1 << 0) +#define IDE_SSDE1 (1 << 3) +#define IDE_SSDE0 (1 << 2) +#define IDE_PSDE1 (1 << 1) +#define IDE_PSDE0 (1 << 0)
#define IDE_SDMA_TIM 0x4a
#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ -#define SIG_MODE_SEC_NORMAL (0 << 18) -#define SIG_MODE_SEC_TRISTATE (1 << 18) -#define SIG_MODE_SEC_DRIVELOW (2 << 18) -#define SIG_MODE_PRI_NORMAL (0 << 16) -#define SIG_MODE_PRI_TRISTATE (1 << 16) -#define SIG_MODE_PRI_DRIVELOW (2 << 16) -#define FAST_SCB1 (1 << 15) -#define FAST_SCB0 (1 << 14) -#define FAST_PCB1 (1 << 13) -#define FAST_PCB0 (1 << 12) -#define SCB1 (1 << 3) -#define SCB0 (1 << 2) -#define PCB1 (1 << 1) -#define PCB0 (1 << 0) +#define SIG_MODE_SEC_NORMAL (0 << 18) +#define SIG_MODE_SEC_TRISTATE (1 << 18) +#define SIG_MODE_SEC_DRIVELOW (2 << 18) +#define SIG_MODE_PRI_NORMAL (0 << 16) +#define SIG_MODE_PRI_TRISTATE (1 << 16) +#define SIG_MODE_PRI_DRIVELOW (2 << 16) +#define FAST_SCB1 (1 << 15) +#define FAST_SCB0 (1 << 14) +#define FAST_PCB1 (1 << 13) +#define FAST_PCB0 (1 << 12) +#define SCB1 (1 << 3) +#define SCB0 (1 << 2) +#define PCB1 (1 << 1) +#define PCB0 (1 << 0)
#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ #define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ @@ -363,62 +363,62 @@ void pch_enable_lpc(void);
/* EHCI PCI Registers */ #define EHCI_PWR_CTL_STS 0x54 -#define PWR_CTL_SET_MASK 0x3 -#define PWR_CTL_SET_D0 0x0 -#define PWR_CTL_SET_D3 0x3 -#define PWR_CTL_ENABLE_PME (1 << 8) -#define PWR_CTL_STATUS_PME (1 << 15) +#define PWR_CTL_SET_MASK 0x3 +#define PWR_CTL_SET_D0 0x0 +#define PWR_CTL_SET_D3 0x3 +#define PWR_CTL_ENABLE_PME (1 << 8) +#define PWR_CTL_STATUS_PME (1 << 15)
/* EHCI Memory Registers */ #define EHCI_USB_CMD 0x20 -#define EHCI_USB_CMD_RUN (1 << 0) -#define EHCI_USB_CMD_PSE (1 << 4) -#define EHCI_USB_CMD_ASE (1 << 5) +#define EHCI_USB_CMD_RUN (1 << 0) +#define EHCI_USB_CMD_PSE (1 << 4) +#define EHCI_USB_CMD_ASE (1 << 5) #define EHCI_PORTSC(port) (0x64 + (port * 4)) -#define EHCI_PORTSC_ENABLED (1 << 2) -#define EHCI_PORTSC_SUSPEND (1 << 7) +#define EHCI_PORTSC_ENABLED (1 << 2) +#define EHCI_PORTSC_SUSPEND (1 << 7)
/* XHCI PCI Registers */ #define XHCI_PWR_CTL_STS 0x74 #define XHCI_USB2PR 0xd0 #define XHCI_USB2PRM 0xd4 -#define XHCI_USB2PR_HCSEL 0x7fff +#define XHCI_USB2PR_HCSEL 0x7fff #define XHCI_USB3PR 0xd8 -#define XHCI_USB3PR_SSEN 0x3f +#define XHCI_USB3PR_SSEN 0x3f #define XHCI_USB3PRM 0xdc #define XHCI_USB3FUS 0xe0 -#define XHCI_USB3FUS_SS_MASK 3 -#define XHCI_USB3FUS_SS_SHIFT 3 +#define XHCI_USB3FUS_SS_MASK 3 +#define XHCI_USB3FUS_SS_SHIFT 3 #define XHCI_USB3PDO 0xe8
/* XHCI Memory Registers */ #define XHCI_USB3_PORTSC(port) ((pch_is_lp() ? 0x510 : 0x570) + (port * 0x10)) -#define XHCI_USB3_PORTSC_CHST (0x7f << 17) -#define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */ -#define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */ -#define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */ -#define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */ -#define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */ -#define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */ -#define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */ -#define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */ -#define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */ -#define XHCI_PLSR_RXDETECT (5 << 5) /* Port is disconnected */ -#define XHCI_PLSR_POLLING (7 << 5) /* Port is polling */ -#define XHCI_PLSW_ENABLE (5 << 5) /* Transition from disabled */ +#define XHCI_USB3_PORTSC_CHST (0x7f << 17) +#define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */ +#define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */ +#define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */ +#define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */ +#define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */ +#define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */ +#define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */ +#define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */ +#define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */ +#define XHCI_PLSR_RXDETECT (5 << 5) /* Port is disconnected */ +#define XHCI_PLSR_POLLING (7 << 5) /* Port is polling */ +#define XHCI_PLSW_ENABLE (5 << 5) /* Transition from disabled */
/* Serial IO IOBP Registers */ #define SIO_IOBP_PORTCTRL0 0xcb000000 /* SDIO D23:F0 */ -#define SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN (1 << 5) -#define SIO_IOBP_PORTCTRL0_PCI_CONF_DIS (1 << 4) +#define SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN (1 << 5) +#define SIO_IOBP_PORTCTRL0_PCI_CONF_DIS (1 << 4) #define SIO_IOBP_PORTCTRL1 0xcb000014 /* SDIO D23:F0 */ -#define SIO_IOBP_PORTCTRL1_SNOOP_SELECT(x) (((x) & 3) << 13) +#define SIO_IOBP_PORTCTRL1_SNOOP_SELECT(x) (((x) & 3) << 13) #define SIO_IOBP_GPIODF 0xcb000154 -#define SIO_IOBP_GPIODF_SDIO_IDLE_DET_EN (1 << 4) -#define SIO_IOBP_GPIODF_DMA_IDLE_DET_EN (1 << 3) -#define SIO_IOBP_GPIODF_UART_IDLE_DET_EN (1 << 2) -#define SIO_IOBP_GPIODF_I2C_IDLE_DET_EN (1 << 1) -#define SIO_IOBP_GPIODF_SPI_IDLE_DET_EN (1 << 0) +#define SIO_IOBP_GPIODF_SDIO_IDLE_DET_EN (1 << 4) +#define SIO_IOBP_GPIODF_DMA_IDLE_DET_EN (1 << 3) +#define SIO_IOBP_GPIODF_UART_IDLE_DET_EN (1 << 2) +#define SIO_IOBP_GPIODF_I2C_IDLE_DET_EN (1 << 1) +#define SIO_IOBP_GPIODF_SPI_IDLE_DET_EN (1 << 0) #define SIO_IOBP_PORTCTRL2 0xcb000240 /* DMA D21:F0 */ #define SIO_IOBP_PORTCTRL3 0xcb000248 /* I2C0 D21:F1 */ #define SIO_IOBP_PORTCTRL4 0xcb000250 /* I2C1 D21:F2 */ @@ -428,11 +428,11 @@ void pch_enable_lpc(void); #define SIO_IOBP_PORTCTRL8 0xcb000270 /* UART1 D21:F6 */ #define SIO_IOBP_PORTCTRLX(x) (0xcb000240 + ((x) * 8)) /* PORTCTRL 2-8 have the same layout */ -#define SIO_IOBP_PORTCTRL_ACPI_IRQ_EN (1 << 21) -#define SIO_IOBP_PORTCTRL_PCI_CONF_DIS (1 << 20) -#define SIO_IOBP_PORTCTRL_SNOOP_SELECT(x) (((x) & 3) << 18) -#define SIO_IOBP_PORTCTRL_INT_PIN(x) (((x) & 0xf) << 2) -#define SIO_IOBP_PORTCTRL_PM_CAP_PRSNT (1 << 1) +#define SIO_IOBP_PORTCTRL_ACPI_IRQ_EN (1 << 21) +#define SIO_IOBP_PORTCTRL_PCI_CONF_DIS (1 << 20) +#define SIO_IOBP_PORTCTRL_SNOOP_SELECT(x) (((x) & 3) << 18) +#define SIO_IOBP_PORTCTRL_INT_PIN(x) (((x) & 0xf) << 2) +#define SIO_IOBP_PORTCTRL_PM_CAP_PRSNT (1 << 1) #define SIO_IOBP_FUNCDIS0 0xce00aa07 /* DMA D21:F0 */ #define SIO_IOBP_FUNCDIS1 0xce00aa47 /* I2C0 D21:F1 */ #define SIO_IOBP_FUNCDIS2 0xce00aa87 /* I2C1 D21:F2 */ @@ -441,7 +441,7 @@ void pch_enable_lpc(void); #define SIO_IOBP_FUNCDIS5 0xce00ab47 /* UART0 D21:F5 */ #define SIO_IOBP_FUNCDIS6 0xce00ab87 /* UART1 D21:F6 */ #define SIO_IOBP_FUNCDIS7 0xce00ae07 /* SDIO D23:F0 */ -#define SIO_IOBP_FUNCDIS_DIS (1 << 8) +#define SIO_IOBP_FUNCDIS_DIS (1 << 8)
/* Serial IO Devices */ #define SIO_ID_SDMA 0 /* D21:F0 */ @@ -454,19 +454,19 @@ void pch_enable_lpc(void); #define SIO_ID_SDIO 7 /* D23:F0 */
#define SIO_REG_PPR_CLOCK 0x800 -#define SIO_REG_PPR_CLOCK_EN (1 << 0) +#define SIO_REG_PPR_CLOCK_EN (1 << 0) #define SIO_REG_PPR_RST 0x804 -#define SIO_REG_PPR_RST_ASSERT 0x3 +#define SIO_REG_PPR_RST_ASSERT 0x3 #define SIO_REG_PPR_GEN 0x808 -#define SIO_REG_PPR_GEN_LTR_MODE_MASK (1 << 2) -#define SIO_REG_PPR_GEN_VOLTAGE_MASK (1 << 3) -#define SIO_REG_PPR_GEN_VOLTAGE(x) ((x & 1) << 3) +#define SIO_REG_PPR_GEN_LTR_MODE_MASK (1 << 2) +#define SIO_REG_PPR_GEN_VOLTAGE_MASK (1 << 3) +#define SIO_REG_PPR_GEN_VOLTAGE(x) ((x & 1) << 3) #define SIO_REG_AUTO_LTR 0x814
#define SIO_REG_SDIO_PPR_GEN 0x1008 #define SIO_REG_SDIO_PPR_SW_LTR 0x1010 #define SIO_REG_SDIO_PPR_CMD12 0x3c -#define SIO_REG_SDIO_PPR_CMD12_B30 (1 << 30) +#define SIO_REG_SDIO_PPR_CMD12_B30 (1 << 30)
#define SIO_PIN_INTA 1 /* IRQ5 in ACPI mode */ #define SIO_PIN_INTB 2 /* IRQ6 in ACPI mode */ @@ -601,13 +601,13 @@ void pch_enable_lpc(void); #define IOBPIRI 0x2330 #define IOBPD 0x2334 #define IOBPS 0x2338 -#define IOBPS_READY 0x0001 -#define IOBPS_TX_MASK 0x0006 -#define IOBPS_MASK 0xff00 -#define IOBPS_READ 0x0600 -#define IOBPS_WRITE 0x0700 +#define IOBPS_READY 0x0001 +#define IOBPS_TX_MASK 0x0006 +#define IOBPS_MASK 0xff00 +#define IOBPS_READ 0x0600 +#define IOBPS_WRITE 0x0700 #define IOBPU 0x233a -#define IOBPU_MAGIC 0xf000 +#define IOBPU_MAGIC 0xf000
#define D31IP 0x3100 /* 32bit */ #define D31IP_TTIP 24 /* Thermal Throttle Pin */ @@ -696,31 +696,31 @@ void pch_enable_lpc(void);
/* ICH7 PMBASE */ #define PM1_STS 0x00 -#define WAK_STS (1 << 15) -#define PCIEXPWAK_STS (1 << 14) -#define PRBTNOR_STS (1 << 11) -#define RTC_STS (1 << 10) -#define PWRBTN_STS (1 << 8) -#define GBL_STS (1 << 5) -#define BM_STS (1 << 4) -#define TMROF_STS (1 << 0) +#define WAK_STS (1 << 15) +#define PCIEXPWAK_STS (1 << 14) +#define PRBTNOR_STS (1 << 11) +#define RTC_STS (1 << 10) +#define PWRBTN_STS (1 << 8) +#define GBL_STS (1 << 5) +#define BM_STS (1 << 4) +#define TMROF_STS (1 << 0) #define PM1_EN 0x02 -#define PCIEXPWAK_DIS (1 << 14) -#define RTC_EN (1 << 10) -#define PWRBTN_EN (1 << 8) -#define GBL_EN (1 << 5) -#define TMROF_EN (1 << 0) +#define PCIEXPWAK_DIS (1 << 14) +#define RTC_EN (1 << 10) +#define PWRBTN_EN (1 << 8) +#define GBL_EN (1 << 5) +#define TMROF_EN (1 << 0) #define PM1_CNT 0x04 -#define SLP_EN (1 << 13) -#define SLP_TYP (7 << 10) -#define SLP_TYP_S0 0 -#define SLP_TYP_S1 1 -#define SLP_TYP_S3 5 -#define SLP_TYP_S4 6 -#define SLP_TYP_S5 7 -#define GBL_RLS (1 << 2) -#define BM_RLD (1 << 1) -#define SCI_EN (1 << 0) +#define SLP_EN (1 << 13) +#define SLP_TYP (7 << 10) +#define SLP_TYP_S0 0 +#define SLP_TYP_S1 1 +#define SLP_TYP_S3 5 +#define SLP_TYP_S4 6 +#define SLP_TYP_S5 7 +#define GBL_RLS (1 << 2) +#define BM_RLD (1 << 1) +#define SCI_EN (1 << 0) #define PM1_TMR 0x08 #define PROC_CNT 0x10 #define LV2 0x14 @@ -728,35 +728,35 @@ void pch_enable_lpc(void); #define LV4 0x16 #define PM2_CNT 0x50 // mobile only #define GPE0_STS 0x20 -#define PME_B0_STS (1 << 13) -#define PME_STS (1 << 11) -#define BATLOW_STS (1 << 10) -#define PCI_EXP_STS (1 << 9) -#define RI_STS (1 << 8) -#define SMB_WAK_STS (1 << 7) -#define TCOSCI_STS (1 << 6) -#define SWGPE_STS (1 << 2) -#define HOT_PLUG_STS (1 << 1) +#define PME_B0_STS (1 << 13) +#define PME_STS (1 << 11) +#define BATLOW_STS (1 << 10) +#define PCI_EXP_STS (1 << 9) +#define RI_STS (1 << 8) +#define SMB_WAK_STS (1 << 7) +#define TCOSCI_STS (1 << 6) +#define SWGPE_STS (1 << 2) +#define HOT_PLUG_STS (1 << 1) #define GPE0_STS_2 0x24 #define GPE0_EN 0x28 -#define PME_B0_EN (1 << 13) -#define PME_EN (1 << 11) -#define TCOSCI_EN (1 << 6) +#define PME_B0_EN (1 << 13) +#define PME_EN (1 << 11) +#define TCOSCI_EN (1 << 6) #define GPE0_EN_2 0x2c #define SMI_EN 0x30 -#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic -#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic -#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS -#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) -#define MCSMI_EN (1 << 11) // Trap microcontroller range access -#define BIOS_RLS (1 << 7) // asserts SCI on bit set -#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set -#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# -#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# -#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic -#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit -#define EOS (1 << 1) // End of SMI (deassert SMI#) -#define GBL_SMI_EN (1 << 0) // SMI# generation at all? +#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic +#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic +#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS +#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) +#define MCSMI_EN (1 << 11) // Trap microcontroller range access +#define BIOS_RLS (1 << 7) // asserts SCI on bit set +#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set +#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# +#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# +#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic +#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit +#define EOS (1 << 1) // End of SMI (deassert SMI#) +#define GBL_SMI_EN (1 << 0) // SMI# generation at all? #define SMI_STS 0x34 #define ALT_GP_SMI_EN 0x38 #define ALT_GP_SMI_STS 0x3a @@ -765,7 +765,7 @@ void pch_enable_lpc(void); #define SS_CNT 0x50 #define C3_RES 0x54 #define TCO1_STS 0x64 -#define DMISCI_STS (1 << 9) +#define DMISCI_STS (1 << 9) #define TCO2_STS 0x66 #define ALT_GP_SMI_EN2 0x5c #define ALT_GP_SMI_STS2 0x5e @@ -832,16 +832,16 @@ void pch_enable_lpc(void); #define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */
#define SPIBAR_HSFS 0x3804 /* SPI hardware sequence status */ -#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ -#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ -#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ -#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ +#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ +#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ +#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ +#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ #define SPIBAR_HSFC 0x3806 /* SPI hardware sequence control */ -#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) -#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ -#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ -#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ -#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ +#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) +#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ +#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ +#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ +#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ #define SPIBAR_FADDR 0x3808 /* SPI flash address */ #define SPIBAR_FDATA(n) (0x3810 + (4 * n)) /* SPI flash data */
-
HAOUAS Elyes