Change in ...coreboot[master]: mb/google/sarien: Enable WWAN detection

[Lijian Zhao (Code Review)]

Lijian Zhao has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30030

Change subject: mb/google/sarien: Enable WWAN detection
......................................................................

mb/google/sarien: Enable WWAN detection

Set GPIO D22 low to get WWAN_PERST#_R asserted.

BUG=N/A
TEST=Boot up with Arcada board, check WWAN get detcted as USB devices
thourgh lsusb command.

Change-Id: Ie848cd19fdf3b6c4b6abeb5fa3f566e5e4e7e928
Signed-off-by: Lijian Zhao 
---
M src/mainboard/google/sarien/variants/arcada/gpio.c
1 file changed, 1 insertion(+), 1 deletion(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/30/30030/1

diff --git a/src/mainboard/google/sarien/variants/arcada/gpio.c b/src/mainboard/google/sarien/variants/arcada/gpio.c
index 91ff089..0ffd029 100644
--- a/src/mainboard/google/sarien/variants/arcada/gpio.c
+++ b/src/mainboard/google/sarien/variants/arcada/gpio.c
@@ -122,7 +122,7 @@
 /* DMIC_CLK0 */		PAD_NC(GPP_D19, NONE),
 /* DMIC_DATA0 */	PAD_NC(GPP_D20, NONE),
 /* SPI1_IO2 */		PAD_CFG_GPO(GPP_D21, 1, DEEP), /* WWAN_BB_RST# */
-/* SPI1_IO3 */		PAD_CFG_GPO(GPP_D22, 1, DEEP), /* WWAN_GPIO_PERST# */
+/* SPI1_IO3 */		PAD_CFG_GPO(GPP_D22, 0, DEEP), /* WWAN_GPIO_PERST# */
 /* I2S_MCLK */		PAD_CFG_GPI_SCI_LOW(GPP_D23, NONE, DEEP,
    			 EDGE_SINGLE), /* WWAN_GPIO_WAKE# */