Change in coreboot[master]: amd/bettong: Enable SATA controller

[Jorge Fernandez (Code Review)]

Jorge Fernandez has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/37622 )

Change subject: amd/bettong: Enable SATA controller
......................................................................

amd/bettong: Enable SATA controller

A minor typo fixed.

Change-Id: I3c5d723aa5095bd12e9e5b2859bfe2fc66033d0c
Signed-off-by: Jorge Fernandez 
---
M src/mainboard/amd/bettong/BiosCallOuts.c
1 file changed, 1 insertion(+), 4 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/22/37622/1

diff --git a/src/mainboard/amd/bettong/BiosCallOuts.c b/src/mainboard/amd/bettong/BiosCallOuts.c
index 3d2aa48..ba2c6a4 100644
--- a/src/mainboard/amd/bettong/BiosCallOuts.c
+++ b/src/mainboard/amd/bettong/BiosCallOuts.c
@@ -87,10 +87,6 @@
    	FchParams_reset->FchReset.Xhci0Enable = CONFIG(HUDSON_XHCI_ENABLE);
    	FchParams_reset->FchReset.Xhci1Enable = FALSE;
    	FchParams_reset->EarlyOemGpioTable = oem_bettong_gpio;
-
-		/* SATA configuration */
-		FchParams_reset->FchReset.SataEnable = TRUE;
-
    } else if (StdHeader->Func == AMD_INIT_ENV) {
    	FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
    	printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
@@ -107,6 +103,7 @@
    	FchParams_env->Usb.Xhci1Enable = FALSE;
    	FchParams_env->Usb.USB30PortInit = 8; /* 8: If USB3 port is unremoveable. */

+		/* sata configuration */
    	/* SD configuration */
    	/* Rev F has an on-board eMMC, which only supports SD 2.0 */
    	if (board_id() == 'F') {

[Jorge Fernandez (Code Review)]

Jorge Fernandez has abandoned this change. ( https://review.coreboot.org/c/coreboot/+/37622 )

Change subject: amd/bettong: Enable SATA controller
......................................................................

Abandoned

I was trying to revert a change with no luck