New patch to review for coreboot: a64a73e southbridge/amd/pi: Whitespace cleanup in Kconfig

[Dave Frodin]

Dave Frodin ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8252

-gerrit

commit a64a73e843392413044ee0977119276c9d22a7e7
Author: Dave Frodin 
Date:   Wed Jan 21 07:26:26 2015 -0700

southbridge/amd/pi: Whitespace cleanup in Kconfig

Change-Id: I4dbccc7d132a14a71107f24124814d30d93d6ece
    Signed-off-by: Dave Frodin 
---
 src/southbridge/amd/pi/hudson/Kconfig | 42 +++++++++++++++++------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/src/southbridge/amd/pi/hudson/Kconfig b/src/southbridge/amd/pi/hudson/Kconfig
index a924ace..c0ca85a 100644
--- a/src/southbridge/amd/pi/hudson/Kconfig
+++ b/src/southbridge/amd/pi/hudson/Kconfig
@@ -61,13 +61,13 @@ config HUDSON_IMC_FWM
    bool "Add IMC firmware"
    depends on !HUDSON_DISABLE_IMC
    default y
-        help
+	help
      Add Hudson 2/3/4 IMC Firmware to support the onboard fan control

config HUDSON_GEC_FWM
    bool
    default n
-        help
+	help
      Add Hudson 2/3/4 GEC Firmware to support the onboard gigabit Ethernet MAC.
      Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard.

@@ -76,17 +76,17 @@ config HUDSON_PSP
    default y if CPU_AMD_PI_00730F01

config HUDSON_XHCI_FWM_FILE
-        string "XHCI firmware path and filename"
-        default "3rdparty/southbridge/amd/avalon/xhci.bin" if SOUTHBRIDGE_AMD_PI_AVALON
+	string "XHCI firmware path and filename"
+	default "3rdparty/southbridge/amd/avalon/xhci.bin" if SOUTHBRIDGE_AMD_PI_AVALON
    depends on HUDSON_XHCI_FWM

config HUDSON_IMC_FWM_FILE
-        string "IMC firmware path and filename"
-        default "3rdparty/southbridge/amd/avalon/imc.bin" if SOUTHBRIDGE_AMD_PI_AVALON
+	string "IMC firmware path and filename"
+	default "3rdparty/southbridge/amd/avalon/imc.bin" if SOUTHBRIDGE_AMD_PI_AVALON
    depends on HUDSON_IMC_FWM

config HUDSON_GEC_FWM_FILE
-        string "GEC firmware path and filename"
+	string "GEC firmware path and filename"
    depends on HUDSON_GEC_FWM

config HUDSON_FWM
@@ -97,12 +97,12 @@ config HUDSON_FWM
 if HUDSON_FWM

config HUDSON_FWM_POSITION
-        hex "Hudson Firmware ROM Position"
-        default 0xFFF20000 if BOARD_ROMSIZE_KB_1024
-        default 0xFFE20000 if BOARD_ROMSIZE_KB_2048
-        default 0xFFC20000 if BOARD_ROMSIZE_KB_4096
-        default 0xFF820000 if BOARD_ROMSIZE_KB_8192
-        default 0xFF020000 if BOARD_ROMSIZE_KB_16384
+	hex "Hudson Firmware ROM Position"
+	default 0xFFF20000 if BOARD_ROMSIZE_KB_1024
+	default 0xFFE20000 if BOARD_ROMSIZE_KB_2048
+	default 0xFFC20000 if BOARD_ROMSIZE_KB_4096
+	default 0xFF820000 if BOARD_ROMSIZE_KB_8192
+	default 0xFF020000 if BOARD_ROMSIZE_KB_16384
    help
      Hudson requires the firmware MUST be located at
      a specific address (ROM start address + 0x20000), otherwise
@@ -118,14 +118,14 @@ config HUDSON_FWM_POSITION
 endif # HUDSON_FWM

config AMD_PUBKEY_FILE
-        depends on HUDSON_PSP
-        string "AMD public Key"
-        default "3rdparty/southbridge/amd/avalon/PSP/AmdPubKey.bin" if CPU_AMD_PI_00730F01
+	depends on HUDSON_PSP
+	string "AMD public Key"
+	default "3rdparty/southbridge/amd/avalon/PSP/AmdPubKey.bin" if CPU_AMD_PI_00730F01

config HUDSON_SATA_MODE
-        int "SATA Mode"
-        default 0
-        range 0 6
+	int "SATA Mode"
+	default 0
+	range 0 6
    help
      Select the mode in which SATA should be driven. NATIVE AHCI, or RAID.
      The default is NATIVE.
@@ -181,8 +181,8 @@ if HUDSON_SATA_MODE = 1
 config RAID_ROM_ID
    string "RAID device PCI IDs"
    default "1022,7802"
-        help
-          1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode
+	help
+	  1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode

config RAID_ROM_FILE
    string "RAID ROM path and filename"