Aaron Durbin (adurbin@google.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/9260
-gerrit
commit 571d94faf4dc56898d31d1c14a239c536547ddb8 Author: huang lin hl@rock-chips.com Date: Fri Oct 10 20:28:47 2014 -0700
rk3288: set cpu frequency up to 1.8GHz
before the rkclk_init(), we must set rk808 buck1 voltage up to 1300mv
BUG=chrome-os-partner:32716, chrome-os-partner:31896 TEST=Boot on veyron_pinky rev2,check the rk808 buck1 voltage 1300mv and check the cpu frequency up to 1.8GHz
Original-Change-Id: I6a8c6e35bd7cc6017f2def72876a9170977f206e Original-Signed-off-by: huang lin hl@rock-chips.com Original-Reviewed-on: https://chromium-review.googlesource.com/222957 Original-Reviewed-by: Doug Anderson dianders@chromium.org
(cherry picked from commit 2e7e7c265691250d4a1b3ff94fe70b0a05f23e16) Signed-off-by: Aaron Durbin adurbin@chromium.org
Change-Id: Iff89d959456dd4d36f4293435caf7b4f7bdaf6fd --- src/mainboard/google/veyron_pinky/bootblock.c | 15 +++++- src/soc/rockchip/rk3288/Makefile.inc | 1 + src/soc/rockchip/rk3288/clock.c | 75 ++++++++++++++++----------- src/soc/rockchip/rk3288/clock.h | 5 +- src/soc/rockchip/rk3288/rk808.c | 33 +++++++++++- src/soc/rockchip/rk3288/rk808.h | 1 + 6 files changed, 96 insertions(+), 34 deletions(-)
diff --git a/src/mainboard/google/veyron_pinky/bootblock.c b/src/mainboard/google/veyron_pinky/bootblock.c index 3ed8e27..a66d748 100644 --- a/src/mainboard/google/veyron_pinky/bootblock.c +++ b/src/mainboard/google/veyron_pinky/bootblock.c @@ -22,11 +22,24 @@ #include <bootblock_common.h> #include <soc/rockchip/rk3288/grf.h> #include <soc/rockchip/rk3288/spi.h> +#include <soc/rockchip/rk3288/rk808.h> +#include <soc/rockchip/rk3288/clock.h> +#include <soc/rockchip/rk3288/pmu.h> +#include <soc/rockchip/rk3288/i2c.h> #include <vendorcode/google/chromeos/chromeos.h>
+#include "board.h" + void bootblock_mainboard_init(void) { - /* i2c1 for tpm*/ + /* cpu frequency will up to 1.8GHz, so the buck1 must up to 1.3v */ + setbits_le32(&rk3288_pmu->iomux_i2c0scl, IOMUX_I2C0SCL); + setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA); + i2c_init(PMIC_BUS, 400*KHz); + rk808_configure_buck(PMIC_BUS, 1, 1300); + rkclk_configure_cpu(); + + /* i2c1 for tpm */ writel(IOMUX_I2C1, &rk3288_grf->iomux_i2c1);
/* spi2 for firmware ROM */ diff --git a/src/soc/rockchip/rk3288/Makefile.inc b/src/soc/rockchip/rk3288/Makefile.inc index 95d72c9..d41919b 100644 --- a/src/soc/rockchip/rk3288/Makefile.inc +++ b/src/soc/rockchip/rk3288/Makefile.inc @@ -31,6 +31,7 @@ bootblock-y += spi.c bootblock-y += media.c bootblock-y += gpio.c bootblock-y += i2c.c +bootblock-y += rk808.c
verstage-y += monotonic_timer.c verstage-y += spi.c diff --git a/src/soc/rockchip/rk3288/clock.c b/src/soc/rockchip/rk3288/clock.c index 0ce3f94..37d366f 100644 --- a/src/soc/rockchip/rk3288/clock.c +++ b/src/soc/rockchip/rk3288/clock.c @@ -235,49 +235,24 @@ void rkclk_init(void) u32 pclk_div;
/* pll enter slow-mode */ - writel(RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_SLOW) - | RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_SLOW) + writel(RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_SLOW) | RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_SLOW), &cru_ptr->cru_mode_con);
/* init pll */ - rkclk_set_pll(&cru_ptr->cru_apll_con[0], &apll_init_cfg); rkclk_set_pll(&cru_ptr->cru_gpll_con[0], &gpll_init_cfg); rkclk_set_pll(&cru_ptr->cru_cpll_con[0], &cpll_init_cfg);
/* waiting for pll lock */ while (1) { if ((readl(&rk3288_grf->soc_status[1]) - & (SOCSTS_APLL_LOCK | SOCSTS_CPLL_LOCK - | SOCSTS_GPLL_LOCK)) - == (SOCSTS_APLL_LOCK | SOCSTS_CPLL_LOCK - | SOCSTS_GPLL_LOCK)) + & (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) + == (SOCSTS_CPLL_LOCK | SOCSTS_GPLL_LOCK)) break; udelay(1); }
/* - * core clock pll source selection and - * set up dependent divisors for MPAXI/M0AXI and ARM clocks. - * core clock select apll, apll clk = 816MHz - * arm clk = 816MHz, mpclk = 204MHz, m0clk = 408MHz - */ - writel(RK_CLRBITS(CORE_SEL_PLL_MSK) - | RK_CLRSETBITS(A12_DIV_MSK, 0 << A12_DIV_SHIFT) - | RK_CLRSETBITS(MP_DIV_MSK, 3 << MP_DIV_SHIFT) - | RK_CLRSETBITS(M0_DIV_MSK, 1 << 0), - &cru_ptr->cru_clksel_con[0]); - - /* - * set up dependent divisors for L2RAM/ATCLK and PCLK clocks. - * l2ramclk = 408MHz, atclk = 204MHz, pclk_dbg = 204MHz - */ - writel(RK_CLRSETBITS(L2_DIV_MSK, 1 << 0) - | RK_CLRSETBITS(ATCLK_DIV_MSK, (3 << ATCLK_DIV_SHIFT)) - | RK_CLRSETBITS(PCLK_DBG_DIV_MSK, (3 << PCLK_DBG_DIV_SHIFT)), - &cru_ptr->cru_clksel_con[37]); - - /* * pd_bus clock pll source selection and * set up dependent divisors for PCLK/HCLK and ACLK clocks. */ @@ -326,13 +301,53 @@ void rkclk_init(void) &cru_ptr->cru_clksel_con[10]);
/* PLL enter normal-mode */ - writel(RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_NORM) - | RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_NORM) + writel(RK_CLRSETBITS(GPLL_MODE_MSK, GPLL_MODE_NORM) | RK_CLRSETBITS(CPLL_MODE_MSK, CPLL_MODE_NORM), &cru_ptr->cru_mode_con);
}
+void rkclk_configure_cpu() +{ + /* pll enter slow-mode */ + writel(RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_SLOW), + &cru_ptr->cru_mode_con); + + rkclk_set_pll(&cru_ptr->cru_apll_con[0], &apll_init_cfg); + + /* waiting for pll lock */ + while (1) { + if (readl(&rk3288_grf->soc_status[1]) & SOCSTS_APLL_LOCK) + break; + udelay(1); + } + + /* + * core clock pll source selection and + * set up dependent divisors for MPAXI/M0AXI and ARM clocks. + * core clock select apll, apll clk = 1800MHz + * arm clk = 1800MHz, mpclk = 450MHz, m0clk = 900MHz + */ + writel(RK_CLRBITS(CORE_SEL_PLL_MSK) + | RK_CLRSETBITS(A12_DIV_MSK, 0 << A12_DIV_SHIFT) + | RK_CLRSETBITS(MP_DIV_MSK, 3 << MP_DIV_SHIFT) + | RK_CLRSETBITS(M0_DIV_MSK, 1 << 0), + &cru_ptr->cru_clksel_con[0]); + + /* + * set up dependent divisors for L2RAM/ATCLK and PCLK clocks. + * l2ramclk = 900MHz, atclk = 450MHz, pclk_dbg = 450MHz + */ + writel(RK_CLRSETBITS(L2_DIV_MSK, 1 << 0) + | RK_CLRSETBITS(ATCLK_DIV_MSK, (3 << ATCLK_DIV_SHIFT)) + | RK_CLRSETBITS(PCLK_DBG_DIV_MSK, (3 << PCLK_DBG_DIV_SHIFT)), + &cru_ptr->cru_clksel_con[37]); + + /* PLL enter normal-mode */ + writel(RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_NORM), + &cru_ptr->cru_mode_con); +} + void rkclk_configure_ddr(unsigned int hz) { struct pll_div dpll_cfg; diff --git a/src/soc/rockchip/rk3288/clock.h b/src/soc/rockchip/rk3288/clock.h index 7a1dba0..e767459 100644 --- a/src/soc/rockchip/rk3288/clock.h +++ b/src/soc/rockchip/rk3288/clock.h @@ -22,7 +22,9 @@
#include "addressmap.h"
-#define APLL_HZ (816*MHz) +#define OSC_HZ (24*MHz) + +#define APLL_HZ (1800*MHz) #define GPLL_HZ (594*MHz) #define CPLL_HZ (384*MHz)
@@ -40,4 +42,5 @@ void rkclk_ddr_reset(u32 ch, u32 ctl, u32 phy); void rkclk_ddr_phy_ctl_reset(u32 ch, u32 n); void rkclk_configure_ddr(unsigned int hz); void rkclk_configure_i2s(unsigned int hz); +void rkclk_configure_cpu(void); #endif /* __SOC_ROCKCHIP_RK3288_CLOCK_H__ */ diff --git a/src/soc/rockchip/rk3288/rk808.c b/src/soc/rockchip/rk3288/rk808.c index 50df96d..48cfa86 100644 --- a/src/soc/rockchip/rk3288/rk808.c +++ b/src/soc/rockchip/rk3288/rk808.c @@ -22,12 +22,15 @@ #include <device/i2c.h> #include <stdint.h> #include <stdlib.h> +#include <delay.h> #include "rk808.h"
#define RK808_ADDR 0x1b
#define DCDC_EN 0x23 #define LDO_EN 0x24 +#define BUCK1SEL 0x2f +#define BUCK4SEL 0x38 #define LDO_ONSEL(i) (0x39 + 2 * i) #define LDO_SLPSEL(i) (0x3a + 2 * i)
@@ -56,12 +59,12 @@ void rk808_configure_ldo(uint8_t bus, int ldo, int millivolts) case 4: case 5: case 8: - vsel = millivolts / 100 - 18; + vsel = div_round_up(millivolts, 100) - 18; break; case 3: case 6: case 7: - vsel = millivolts / 100 - 8; + vsel = div_round_up(millivolts, 100) - 8; break; default: die("Unknown LDO index!"); @@ -71,3 +74,29 @@ void rk808_configure_ldo(uint8_t bus, int ldo, int millivolts) rk808_clrsetbits(bus, LDO_ONSEL(ldo), 0x1f, vsel); rk808_clrsetbits(bus, LDO_EN, 0, 1 << (ldo - 1)); } + +void rk808_configure_buck(uint8_t bus, int buck, int millivolts) +{ + uint8_t vsel; + uint8_t buck_reg; + + switch (buck) { + case 1: + case 2: + /*base on 725mv, use 25mv step */ + vsel = (div_round_up(millivolts, 25) - 29) * 2 + 1; + assert(vsel <= 0x3f); + buck_reg = BUCK1SEL + 4 * (buck - 1); + break; + case 4: + vsel = div_round_up(millivolts, 100) - 18; + assert(vsel <= 0xf); + buck_reg = BUCK4SEL; + break; + default: + die("fault buck index!"); + } + rk808_clrsetbits(bus, buck_reg, 0x3f, vsel); + rk808_clrsetbits(bus, DCDC_EN, 0, 1 << (buck - 1)); + udelay(225);/* Must wait for voltage to stabilize */ +} diff --git a/src/soc/rockchip/rk3288/rk808.h b/src/soc/rockchip/rk3288/rk808.h index 0052075..e03ace8 100644 --- a/src/soc/rockchip/rk3288/rk808.h +++ b/src/soc/rockchip/rk3288/rk808.h @@ -22,5 +22,6 @@
void rk808_configure_switch(uint8_t bus, int sw, int enabled); void rk808_configure_ldo(uint8_t bus, int ldo, int millivolts); +void rk808_configure_buck(uint8_t bus, int buck, int millivolts);
#endif
-
Aaron Durbin