[S] Change in coreboot[master]: mb/google/brya/var/taeko: remove rtd3 for emmc

[Nick Vaccaro (Code Review)]

Nick Vaccaro has submitted this change. ( https://review.coreboot.org/c/coreboot/+/74029 )

Change subject: mb/google/brya/var/taeko: remove rtd3 for emmc
......................................................................

mb/google/brya/var/taeko: remove rtd3 for emmc

Remove rtd3 for emmc device on taeko

BUG=b:271003060
TEST= emerge-brya coreboot, flash to DUT and can boot to OS

Signed-off-by: Joey Peng 
Change-Id: I21191c9762a00ba137892e680d533f7dc3b53e86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74029
Tested-by: build bot (Jenkins) 
Reviewed-by: Nick Vaccaro 
---
M src/mainboard/google/brya/variants/taeko/overridetree.cb
1 file changed, 18 insertions(+), 9 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Nick Vaccaro: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/taeko/overridetree.cb b/src/mainboard/google/brya/variants/taeko/overridetree.cb
index cdfd2ff..ec43c976 100644
--- a/src/mainboard/google/brya/variants/taeko/overridetree.cb
+++ b/src/mainboard/google/brya/variants/taeko/overridetree.cb
@@ -539,15 +539,6 @@
    			.flags = PCIE_RP_LTR | PCIE_RP_AER,
    			.pcie_rp_aspm = ASPM_L1,
    		}"
-			chip soc/intel/common/block/pcie/rtd3
-				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D11)"
-				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B4)"
-				register "srcclk_pin" = "0"
-				register "ext_pm_support" = "ACPI_PCIE_RP_EMIT_ALL"
-				device generic 0 on
-					probe BOOT_EMMC_MASK BOOT_EMMC_ENABLED
-				end
-			end
    		probe BOOT_EMMC_MASK BOOT_EMMC_ENABLED
    	end
    	device ref gspi1 on