the following patch was just integrated into master: commit 498c32a6e8d06e3989cb83def86952e9301b84ee Author: Dennis Wassenberg dennis.wassenberg@secunet.com Date: Tue Oct 14 17:29:36 2014 +0200
siemens/sitemp_g1p1: Fix serial output for simo board
The simo board with console output at UART port 1 (COM2) will not produce any output if CONFIG_UART_FOR_CONSOLE=1 is set correctly. Commit f29200240e428761827ab8d179fa23068bfa9d59 (superio/ite/*: Factor out generic romstage component) will only and always activate UART port 0 unregarded to CONFIG_UART_FOR_CONSOLE value. Now the UART port which was selected by CONFIG_UART_FOR_CONSOLE will be enabled and used for console output
Change-Id: Ibbd2b5115b1ed4763962ba32fc9c19431a906c78 Signed-off-by: Dennis Wassenberg dennis.wassenberg@secunet.com Reviewed-on: http://review.coreboot.org/7060 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber nico.h@gmx.de
See http://review.coreboot.org/7060 for details.
-gerrit