Change in coreboot[master]: soc/mediatek/mt8186: revise SPI NOR GPIO selection

[Rex-BC Chen (Code Review)]

Attention is currently required from: Hung-Te Lin.
Rex-BC Chen has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/59940 )

Change subject: soc/mediatek/mt8186: revise SPI NOR GPIO selection
......................................................................

soc/mediatek/mt8186: revise SPI NOR GPIO selection

The setting of SPI NOR GPIOs should be:
CS: pull up.
CLK/IO0/IO1: pull down.

BUG=b:202871018
TEST=build pass

Signed-off-by: Rex-BC Chen 
Change-Id: Ideacb797a1dc9999ab6ba00cf33adbbbc24213dc
---
M src/soc/mediatek/mt8186/spi.c
1 file changed, 13 insertions(+), 11 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/40/59940/1

diff --git a/src/soc/mediatek/mt8186/spi.c b/src/soc/mediatek/mt8186/spi.c
index 87f669d..d4d3684 100644
--- a/src/soc/mediatek/mt8186/spi.c
+++ b/src/soc/mediatek/mt8186/spi.c
@@ -43,10 +43,12 @@
 struct pad_func {
    gpio_t gpio;
    u8 func;
+	enum pull_select select;
 };

-#define PAD_FUNC(name, func) {GPIO(name), PAD_##name##_FUNC_##func}
-#define PAD_FUNC_GPIO(name) {GPIO(name), 0}
+#define PAD_FUNC(name, func) {GPIO(name), PAD_##name##_FUNC_##func, GPIO_PULL_DOWN}
+#define PAD_FUNC_SEL(name, func, sel) {GPIO(name), PAD_##name##_FUNC_##func, sel}
+#define PAD_FUNC_GPIO(name) {GPIO(name), 0, GPIO_PULL_DOWN}

static const struct pad_func pad0_funcs[SPI_BUS_NUMBER][4] = {
    {
@@ -121,17 +123,17 @@
 static const struct pad_func nor_pinmux[SPI_NOR_GPIO_SET_NUM][4] = {
    /* GPIO 36 ~ 39 */
    [SPI_NOR_GPIO_SET0] = {
-		PAD_FUNC(SPI0_CLK, SPINOR_CK),
-		PAD_FUNC(SPI0_CSB, SPINOR_CS),
-		PAD_FUNC(SPI0_MO, SPINOR_IO0),
-		PAD_FUNC(SPI0_MI, SPINOR_IO1),
+		PAD_FUNC_SEL(SPI0_CLK, SPINOR_CK, GPIO_PULL_DOWN),
+		PAD_FUNC_SEL(SPI0_CSB, SPINOR_CS, GPIO_PULL_UP),
+		PAD_FUNC_SEL(SPI0_MO, SPINOR_IO0, GPIO_PULL_DOWN),
+		PAD_FUNC_SEL(SPI0_MI, SPINOR_IO1, GPIO_PULL_DOWN),
    },
    /* GPIO 61 ~ 64 */
    [SPI_NOR_GPIO_SET1] = {
-		PAD_FUNC(TDM_RX_BCK, SPINOR_CK),
-		PAD_FUNC(TDM_RX_MCLK, SPINOR_CS),
-		PAD_FUNC(TDM_RX_DATA0, SPINOR_IO0),
-		PAD_FUNC(TDM_RX_DATA1, SPINOR_IO1),
+		PAD_FUNC_SEL(TDM_RX_BCK, SPINOR_CK, GPIO_PULL_DOWN),
+		PAD_FUNC_SEL(TDM_RX_MCLK, SPINOR_CS, GPIO_PULL_UP),
+		PAD_FUNC_SEL(TDM_RX_DATA0, SPINOR_IO0, GPIO_PULL_DOWN),
+		PAD_FUNC_SEL(TDM_RX_DATA1, SPINOR_IO1, GPIO_PULL_DOWN),
    },
 };

@@ -143,7 +145,7 @@

ptr = nor_pinmux[gpio_set];
    for (size_t i = 0; i < ARRAY_SIZE(nor_pinmux[gpio_set]); i++) {
-		gpio_set_pull(ptr[i].gpio, GPIO_PULL_ENABLE, GPIO_PULL_UP);
+		gpio_set_pull(ptr[i].gpio, GPIO_PULL_ENABLE, ptr[i].select);
    	gpio_set_mode(ptr[i].gpio, ptr[i].func);
    }
 }