Change in coreboot[master]: mb/google/brya/var/brya0: Align comments in overridetree

[David Hendricks (Code Review)]

David Hendricks has submitted this change. ( https://review.coreboot.org/c/coreboot/+/57071 )

Change subject: mb/google/brya/var/brya0: Align comments in overridetree
......................................................................

mb/google/brya/var/brya0: Align comments in overridetree

Change-Id: Id3eb18cae2dd9a7b148bc9f3dcaf387f35dbd2fb
Fixes: 312fb716 ("mb/google/brya: Add ALC1019_NAU88L25B support")
Signed-off-by: Paul Menzel 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57071
Tested-by: build bot (Jenkins) 
Reviewed-by: EricR Lai 
---
M src/mainboard/google/brya/variants/brya0/overridetree.cb
1 file changed, 9 insertions(+), 9 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  EricR Lai: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/brya0/overridetree.cb b/src/mainboard/google/brya/variants/brya0/overridetree.cb
index f053eb6..3e02642 100644
--- a/src/mainboard/google/brya/variants/brya0/overridetree.cb
+++ b/src/mainboard/google/brya/variants/brya0/overridetree.cb
@@ -204,21 +204,21 @@
    			register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)"
    			register "jkdet_enable" = "1"
    			register "jkdet_pull_enable" = "0"
-				register "jkdet_polarity" = "1"        # ActiveLow
-				register "vref_impedance" = "2"        # 125kOhm
-				register "micbias_voltage" = "6"    # 2.754
+				register "jkdet_polarity" = "1"		# ActiveLow
+				register "vref_impedance" = "2"		# 125kOhm
+				register "micbias_voltage" = "6"	# 2.754
    			register "sar_threshold_num" = "4"
    			register "sar_threshold[0]" = "0x0c"
    			register "sar_threshold[1]" = "0x1c"
    			register "sar_threshold[2]" = "0x38"
    			register "sar_threshold[3]" = "0x60"
    			register "sar_hysteresis" = "1"
-				register "sar_voltage" = "0"        # VDDA
-				register "sar_compare_time" = "0"    # 500ns
-				register "sar_sampling_time" = "0"    # 2us
-				register "short_key_debounce" = "2"    # 100ms
-				register "jack_insert_debounce" = "7"    # 512ms
-				register "jack_eject_debounce" = "7"    # 512ms
+				register "sar_voltage" = "0"		# VDDA
+				register "sar_compare_time" = "0"	# 500ns
+				register "sar_sampling_time" = "0"	# 2us
+				register "short_key_debounce" = "2"	# 100ms
+				register "jack_insert_debounce" = "7"	# 512ms
+				register "jack_eject_debounce" = "7"	# 512ms
    			device i2c 1a on
    				probe AUDIO ALC1019_NAU88L25B_I2S
    			end