[S] Change in coreboot[master]: mb/google/brya/var/marasov: Disable FPMCU interface

[Martin L Roth (Code Review)]

Martin L Roth has submitted this change. ( https://review.coreboot.org/c/coreboot/+/71650 )

Change subject: mb/google/brya/var/marasov: Disable FPMCU interface
......................................................................

mb/google/brya/var/marasov: Disable FPMCU interface

Set fingerprint control GPIO to NC by HW design.

BUG=b:264340020
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage

Signed-off-by: Frank Chu 
Change-Id: I304862f0dd201da100b89c79a473eb116fc8263e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71650
Reviewed-by: Frank Chu 
Tested-by: build bot (Jenkins) 
Reviewed-by: Dtrain Hsu 
---
M src/mainboard/google/brya/variants/marasov/gpio.c
1 file changed, 30 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Dtrain Hsu: Looks good to me, approved
  Frank Chu: Looks good to me, but someone else must approve

diff --git a/src/mainboard/google/brya/variants/marasov/gpio.c b/src/mainboard/google/brya/variants/marasov/gpio.c
index 032922a..745861f 100644
--- a/src/mainboard/google/brya/variants/marasov/gpio.c
+++ b/src/mainboard/google/brya/variants/marasov/gpio.c
@@ -100,6 +100,16 @@
    PAD_NC(GPP_E21, NONE),
    /* F6  : WWAN_WLAN_COEX3 ==> NC */
    PAD_NC(GPP_F6, NONE),
+	/* F11 : THC1_SPI2_CLK ==> NC */
+	PAD_NC_LOCK(GPP_F11, NONE, LOCK_CONFIG),
+	/* F12 : GSXDOUT ==> NC */
+	PAD_NC_LOCK(GPP_F12, NONE, LOCK_CONFIG),
+	/* F13 : GSXDOUT ==> NC */
+	PAD_NC_LOCK(GPP_F13, NONE, LOCK_CONFIG),
+	/* F15 : GSXSRESET# ==> NC */
+	PAD_NC_LOCK(GPP_F15, NONE, LOCK_CONFIG),
+	/* F16 : GSXCLK ==> NC */
+	PAD_NC_LOCK(GPP_F16, NONE, LOCK_CONFIG),
    /* F19 : GPP_F19(TP93) ==> NC */
    PAD_NC(GPP_F19, NONE),
    /* F20 : UCAM_RST_L ==> NC */