Change in coreboot[master]: soc/intel/common/../cse: Avoid caching of CSE BAR

[Subrata Banik (Code Review)]

Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/58062 )

Change subject: soc/intel/common/../cse: Avoid caching of CSE BAR
......................................................................

soc/intel/common/../cse: Avoid caching of CSE BAR

This patch ensures all attempts to read CSE BAR is performing PCI config
space read and returning the BAR value rather than using cached value.

This refactoring is useful to read BAR of all CSE devices rather than
just HECI 1 alone.

Additionally, change the return type of get_cse_bar() from `uintptr_t`
to `void *` to avoid typecasting while calling read32/write32 functions.

BUG=b:200644229
TEST=Able to build and boot ADLRVP where CSE is able to perform PCI
enumeration and send the EOP message at post.

Signed-off-by: Subrata Banik 
Change-Id: Id4ecc9006d6323b7c9d7a6af1afa5cfe63d933e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58062
Tested-by: build bot (Jenkins) 
Reviewed-by: Tim Wawrzynczak 
---
M src/soc/intel/common/block/cse/cse.c
1 file changed, 17 insertions(+), 42 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Tim Wawrzynczak: Looks good to me, approved

diff --git a/src/soc/intel/common/block/cse/cse.c b/src/soc/intel/common/block/cse/cse.c
index ffe10a5..d3b7d9b 100644
--- a/src/soc/intel/common/block/cse/cse.c
+++ b/src/soc/intel/common/block/cse/cse.c
@@ -64,9 +64,19 @@
 #define MEI_HDR_CSE_ADDR_START	0
 #define MEI_HDR_CSE_ADDR	(((1 << 8) - 1) << MEI_HDR_CSE_ADDR_START)

-static struct cse_device {
-	uintptr_t sec_bar;
-} cse;
+/* Get HECI BAR 0 from PCI configuration space */
+static uintptr_t get_cse_bar(void)
+{
+	uintptr_t bar;
+
+	bar = pci_read_config32(PCH_DEV_CSE, PCI_BASE_ADDRESS_0);
+	assert(bar != 0);
+	/*
+	 * Bits 31-12 are the base address as per EDS for SPI,
+	 * Don't care about 0-11 bit
+	 */
+	return bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK;
+}

/*
  * Initialize the device with provided temporary BAR. If BAR is 0 use a
@@ -83,7 +93,7 @@
    u16 pcireg;

/* Assume it is already initialized, nothing else to do */
-	if (cse.sec_bar)
+	if (get_cse_bar())
    	return;

/* Use default pre-ram bar */
@@ -102,38 +112,16 @@

/* Enable Bus Master and MMIO Space */
    pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
-	cse.sec_bar = tempbar;
-}
-
-/* Get HECI BAR 0 from PCI configuration space */
-static uint32_t get_cse_bar(void)
-{
-	uintptr_t bar;
-
-	bar = pci_read_config32(PCH_DEV_CSE, PCI_BASE_ADDRESS_0);
-	assert(bar != 0);
-	/*
-	 * Bits 31-12 are the base address as per EDS for SPI,
-	 * Don't care about 0-11 bit
-	 */
-	return bar & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK;
 }

static uint32_t read_bar(uint32_t offset)
 {
-	/* Load and cache BAR */
-	if (!cse.sec_bar)
-		cse.sec_bar = get_cse_bar();
-	return read32((void *)(cse.sec_bar + offset));
+	return read32p(get_cse_bar() + offset);
 }

static void write_bar(uint32_t offset, uint32_t val)
 {
-	/* Load and cache BAR */
-	if (!cse.sec_bar)
-		cse.sec_bar = get_cse_bar();
-	return write32((void *)(cse.sec_bar + offset), val);
+	return write32p(get_cse_bar() + offset, val);
 }

static uint32_t read_cse_csr(void)
@@ -968,21 +956,8 @@

#if ENV_RAMSTAGE

-static void update_sec_bar(struct device *dev)
-{
-	cse.sec_bar = find_resource(dev, PCI_BASE_ADDRESS_0)->base;
-}
-
-static void cse_set_resources(struct device *dev)
-{
-	if (dev->path.pci.devfn == PCH_DEVFN_CSE)
-		update_sec_bar(dev);
-
-	pci_dev_set_resources(dev);
-}
-
 static struct device_operations cse_ops = {
-	.set_resources		= cse_set_resources,
+	.set_resources		= pci_dev_set_resources,
    .read_resources		= pci_dev_read_resources,
    .enable_resources	= pci_dev_enable_resources,
    .init			= pci_dev_init,

3 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.