[S] Change in coreboot[main]: mb/google/brox/var/jubilant: Add SAR sensor SX9324

[Ren Kuo (Code Review)]

Attention is currently required from: Karthik Ramasubramanian, Ren Kuo, Shelley Chen, Sheng-Liang Pan.

Hello David Wu, Karthik Ramasubramanian, Kenneth Chan, Shelley Chen, Sheng-Liang Pan, build bot (Jenkins),

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/83779?usp=email

to look at the new patch set (#8).

Change subject: mb/google/brox/var/jubilant: Add SAR sensor SX9324
......................................................................

mb/google/brox/var/jubilant: Add SAR sensor SX9324

Add SAR Sensor SX9324 for WWAN:
- Apply DRIVERS_I2C_SX9324
- Config GPP_H19 for IRQ
- Add SX9324 registers settings based on tuning value from SEMTECH.
  Refer to datasheet:
  https://chromeos.google.com/partner/dlm/avl/component/3624/

BUG=b:345327104
TEST=Build and verify on jubilant

Change-Id: I629117f20ca513dc0c8eaa91744ad33e162ba4bb
Signed-off-by: Ren Kuo 
---
M src/mainboard/google/brox/Kconfig
M src/mainboard/google/brox/variants/jubilant/gpio.c
M src/mainboard/google/brox/variants/jubilant/overridetree.cb
3 files changed, 26 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/79/83779/8