Paul Menzel (paulepanter@users.sourceforge.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3183
-gerrit
commit af2e68fd126409d695982ad0dfb37257d56098a0 Author: Paul Menzel paulepanter@users.sourceforge.net Date: Fri May 3 12:23:39 2013 +0200
Intel BD82x6x: LPC: Unify I/O APIC setup
Remove local copies of reading and writing I/O APIC registers by using already available functions.
This change is similar to
commit db4f875a412e6c41f48a86a79b72465f6cd81635 Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Tue Jan 31 17:24:12 2012 +0200
IOAPIC: Divide setup_ioapic() in two parts.
Reviewed-on: http://review.coreboot.org/300
and
commit e614353194c712a40aa8444a530b2062876eabe3 Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Tue Feb 26 17:24:41 2013 +0200
Unify setting 82801a/b/c/d IOAPIC ID
Reviewed-on: http://review.coreboot.org/2532
and uses `io_apic_read()` and `io_apic_write()` too. Define `ACPI_EN` in the header file `pch.h`.
As commented by Aaron Durbin, a separate `pch_enable_acpi()` is not needed: “The existing code path *in this file* is about enabling the io apic.” [1].
[1] http://review.coreboot.org/#/c/3182/4/src/southbridge/intel/lynxpoint/lpc.c
Change-Id: I4478b1902d09061ca1db8eab6b71fef388c7a74c Signed-off-by: Paul Menzel paulepanter@users.sourceforge.net --- src/southbridge/intel/bd82x6x/lpc.c | 48 +++++++++++++------------------------ src/southbridge/intel/bd82x6x/pch.h | 1 + 2 files changed, 18 insertions(+), 31 deletions(-)
diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c index 7bcadc9..d878155 100644 --- a/src/southbridge/intel/bd82x6x/lpc.c +++ b/src/southbridge/intel/bd82x6x/lpc.c @@ -39,43 +39,29 @@
typedef struct southbridge_intel_bd82x6x_config config_t;
-static void pch_enable_apic(struct device *dev) +/** + * Set miscellanous static southbridge features. + * + * @param dev PCI device with I/O APIC control registers + */ +static void pch_enable_ioapic(struct device *dev) { - int i; u32 reg32; - volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); - volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10);
- /* Enable ACPI I/O and power management. - * Set SCI IRQ to IRQ9 - */ - pci_write_config8(dev, ACPI_CNTL, 0x80); + /* Enable ACPI I/O range decode */ + pci_write_config8(dev, ACPI_CNTL, ACPI_EN);
- *ioapic_index = 0; - *ioapic_data = (2 << 24); + set_ioapic_id(IO_APIC_ADDR, 0x02);
/* affirm full set of redirection table entries ("write once") */ - *ioapic_index = 1; - reg32 = *ioapic_data; - *ioapic_index = 1; - *ioapic_data = reg32; - - *ioapic_index = 0; - reg32 = *ioapic_data; - printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); - if (reg32 != (2 << 24)) - die("APIC Error\n"); - - printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); - for (i=0; i<3; i++) { - *ioapic_index = i; - printk(BIOS_SPEW, " reg 0x%04x:", i); - reg32 = *ioapic_data; - printk(BIOS_SPEW, " 0x%08x\n", reg32); - } + reg32 = io_apic_read(IO_APIC_ADDR, 0x01); + io_apic_write(IO_APIC_ADDR, reg32);
- *ioapic_index = 3; /* Select Boot Configuration register. */ - *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ + /* + * Select Boot Configuration register (0x03) and + * use Processor System Bus (0x01) to deliver interrupts. + */ + io_apic_write(IO_APIC_ADDR, 0x03, 0x01); }
static void pch_enable_serial_irqs(struct device *dev) @@ -538,7 +524,7 @@ static void lpc_init(struct device *dev) pci_write_config16(dev, PCI_COMMAND, 0x000f);
/* IO APIC initialization. */ - pch_enable_apic(dev); + pch_enable_ioapic(dev);
pch_enable_serial_irqs(dev);
diff --git a/src/southbridge/intel/bd82x6x/pch.h b/src/southbridge/intel/bd82x6x/pch.h index 7f64571..1137a6e 100644 --- a/src/southbridge/intel/bd82x6x/pch.h +++ b/src/southbridge/intel/bd82x6x/pch.h @@ -119,6 +119,7 @@ int early_spi_read(u32 offset, u32 size, u8 *buffer);
#define PMBASE 0x40 #define ACPI_CNTL 0x44 +#define ACPI_EN (1 << 7) #define BIOS_CNTL 0xDC #define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ #define GPIO_CNTL 0x4C /* LPC GPIO Control Register */
-
Paul Menzel