Change in coreboot[master]: mb/supermicro/x11ssm-f: correct trigger for SMI/NMI interrupt inputs

[Michael Niewöhner (Code Review)]

Hello  Felix Singer, build bot (Jenkins), Paul Menzel, Tim Wawrzynczak, Patrick Rudolph,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/48093

to look at the new patch set (#9).

Change subject: mb/supermicro/x11ssm-f: correct trigger for SMI/NMI interrupt inputs
......................................................................

mb/supermicro/x11ssm-f: correct trigger for SMI/NMI interrupt inputs

All four SMI/NMI interrupt inputs have an external pull-up resistor and
get triggered by pulling the line low. Thus, correct the trigger to
active-low.

Also document the signals by adding appropriate comments.

The pads' connections have been determined by dissecting a dead board.

Signed-off-by: Michael Niewöhner 
Change-Id: Id1a8c1e0b9fe723a15d04a88d565a53eeba9b085
---
M src/mainboard/supermicro/x11-lga1151-series/variants/x11ssm-f/gpio.c
1 file changed, 5 insertions(+), 5 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/93/48093/9