[XS] Change in coreboot[main]: nb/intel/gm45: Call `mb_post_raminit_setup()` later

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/81946?usp=email )

Change subject: nb/intel/gm45: Call `mb_post_raminit_setup()` later
......................................................................

nb/intel/gm45: Call `mb_post_raminit_setup()` later

The only implementations of `mb_post_raminit_setup()` in the tree are
found in Lenovo ThinkPads. These boards use this function to toggle a
SMBus mux, which makes the DIMM SPDs inaccessible. Given that the SPD
data is needed in `setup_sdram_meminfo()` and that there are no other
side-effects, simply move the call to `mb_post_raminit_setup()` after
the call to `setup_sdram_meminfo()`.

TEST=Verify SMBIOS Type 17 information for lenovo/x200 is correct.

Change-Id: I46abffa48e7e0848f9346ce9c6498860e4ece2da
Signed-off-by: Angel Pons 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81946
Tested-by: build bot (Jenkins) 
Reviewed-by: Nico Huber 
---
M src/northbridge/intel/gm45/romstage.c
1 file changed, 2 insertions(+), 2 deletions(-)

Approvals:
  Nico Huber: Looks good to me, approved
  build bot (Jenkins): Verified

diff --git a/src/northbridge/intel/gm45/romstage.c b/src/northbridge/intel/gm45/romstage.c
index 9ed3c00..bc17618 100644
--- a/src/northbridge/intel/gm45/romstage.c
+++ b/src/northbridge/intel/gm45/romstage.c
@@ -74,8 +74,6 @@

raminit(&sysinfo, s3resume);

-	mb_post_raminit_setup();
-
    /* Disable D4F0 (unknown signal controller). */
    pci_and_config32(MCH_DEV, D0F0_DEVEN, ~0x4000);

@@ -93,6 +91,8 @@

setup_sdram_meminfo(&sysinfo);

+	mb_post_raminit_setup();
+
    romstage_handoff_init(cbmem_initted && s3resume);

printk(BIOS_SPEW, "exit main()\n");