Change in coreboot[master]: console: serial: add optional delay to wait for BMC serial routing

[Michael Niewöhner (Code Review)]

Hello Kyösti Mälkki, Patrick Rudolph, Arthur Heymans, Jacob Garber, Matt DeVillier, build bot (Jenkins), Nico Huber, Patrick Georgi,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/36591

to look at the new patch set (#2).

Change subject: console: serial: add optional delay to wait for BMC serial routing
......................................................................

console: serial: add optional delay to wait for BMC serial routing

Some mainboards with a BMC do the serial routing setup in the BMC boot
phase on cold boot. This results in scrambled console output when this
is not finished fast enough.

This adds a Kconfig-based delay that can be set at mainboard level to
wait for the BMC to finish setup.

A user may set this delay to 0 when using another BMC firmware like
OpenBMC, u-bmc or some custom BMC bootloader with fast serial setup.

Change-Id: I7d6599b76384fc94a00a9cfc1794ebfe34863ff9
Signed-off-by: Michael Niewöhner 
---
M src/console/Kconfig
M src/console/init.c
2 files changed, 15 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/91/36591/2