Kyösti Mälkki (kyosti.malkki@gmail.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5307
-gerrit
commit 867584dcfb09fdf41f77a92db2acfdb65e4f96d9 Author: Kyösti Mälkki kyosti.malkki@gmail.com Date: Tue Feb 25 12:06:14 2014 +0200
usbdebug: Move Kconfig under drivers/usb
This menu may become a bit more complicated with addition of new USB hardware so move it out of console/.
Change-Id: Ieb330675b9227a3e53d093f7c2b5a65e3842dc82 Signed-off-by: Kyösti Mälkki kyosti.malkki@gmail.com --- src/arch/x86/lib/romstage_console.c | 4 +- src/console/Kconfig | 96 ++----------------------------------- src/console/Makefile.inc | 2 +- src/console/console.c | 2 +- src/drivers/Kconfig | 1 + src/drivers/usb/Kconfig | 94 ++++++++++++++++++++++++++++++++++++ src/lib/coreboot_table.c | 4 +- 7 files changed, 106 insertions(+), 97 deletions(-)
diff --git a/src/arch/x86/lib/romstage_console.c b/src/arch/x86/lib/romstage_console.c index 6566b2f..5e7923e 100644 --- a/src/arch/x86/lib/romstage_console.c +++ b/src/arch/x86/lib/romstage_console.c @@ -37,7 +37,7 @@ void console_tx_byte(unsigned char byte) #if CONFIG_CONSOLE_SERIAL8250 uart_tx_byte(byte); #endif -#if CONFIG_USBDEBUG && (CONFIG_USBDEBUG_IN_ROMSTAGE || !defined(__PRE_RAM__)) +#if CONFIG_CONSOLE_USB && (CONFIG_USBDEBUG_IN_ROMSTAGE || !defined(__PRE_RAM__)) usb_tx_byte(0, byte); #endif #if CONFIG_CONSOLE_NE2K @@ -62,7 +62,7 @@ void console_tx_flush(void) #if CONFIG_CONSOLE_NE2K ne2k_transmit(CONFIG_CONSOLE_NE2K_IO_PORT); #endif -#if CONFIG_USBDEBUG && (CONFIG_USBDEBUG_IN_ROMSTAGE || !defined(__PRE_RAM__)) +#if CONFIG_CONSOLE_USB && (CONFIG_USBDEBUG_IN_ROMSTAGE || !defined(__PRE_RAM__)) usb_tx_flush(0); #endif } diff --git a/src/console/Kconfig b/src/console/Kconfig index 40903c1..bb64f29 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -141,100 +141,14 @@ config SPKMODEM help Send coreboot debug output through speaker
-# Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code. -config HAVE_USBDEBUG - bool - default y if HAVE_USBDEBUG_OPTIONS +config CONSOLE_USB + bool "USB dongle console output" + depends on USBDEBUG default n - -# Use "select HAVE_USBDEBUG_OPTIONS" on southbridges with multiple -# EHCI controllers or multiple ports with Debug Port capability -config HAVE_USBDEBUG_OPTIONS - def_bool n - -config USBDEBUG - bool "USB 2.0 EHCI debug dongle support" - default n - depends on HAVE_USBDEBUG help - This option allows you to use a so-called USB EHCI Debug device - (such as the Ajays NET20DC, AMIDebug RX, or a system using the - Linux "EHCI Debug Device gadget" driver found in recent kernel) - to retrieve the coreboot debug messages (instead, or in addition - to, a serial port). - - This feature is NOT supported on all chipsets in coreboot! - - It also requires a USB2 controller which supports the EHCI - Debug Port capability. - - See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list - of supported controllers. - - If unsure, say N. - -if USBDEBUG - -config USBDEBUG_IN_ROMSTAGE - bool "Enable early (pre-RAM) usbdebug console output." - default y - depends on EARLY_CBMEM_INIT && EARLY_CONSOLE - help - Configuring USB controllers in system-agent binary may cause - problems to usbdebug. Disabling this option delays usbdebug to - be setup on entry to ramstage. - - If unsure, say Y. - -config USBDEBUG_HCD_INDEX - int - default 0 - prompt "Index for EHCI controller to use with usbdebug" if HAVE_USBDEBUG_OPTIONS - help - Some boards have multiple EHCI controllers with possibly only - one having the Debug Port capability on an external USB port. - - Mapping of this index to PCI device functions is southbridge - specific and mainboard level Kconfig should already provide - a working default value here. - -config USBDEBUG_DEFAULT_PORT - int - default 0 - prompt "Default USB port to use as Debug Port" if HAVE_USBDEBUG_OPTIONS - help - Selects which physical USB port usbdebug dongle is connected to. - Setting of 0 means to scan possible ports starting from 1. - - Intel platforms have hardwired the debug port location and this - setting makes no difference there. - - Hence, if you select the correct port here, you can speed up - your boot time. Which USB port number refers to which actual - port on your mainboard (potentially also USB pin headers on - your mainboard) is highly board-specific, and you'll likely - have to find out by trial-and-error. - -choice - prompt "Type of dongle" - default USBDEBUG_DONGLE_STD - -config USBDEBUG_DONGLE_STD - bool "Net20DC or compatible" - -config USBDEBUG_DONGLE_BEAGLEBONE - bool "BeagleBone" - help - Use this to configure the USB hub on BeagleBone board. - -endchoice - -config USBDEBUG_OPTIONAL_HUB_PORT - int - default 2 if USBDEBUG_DONGLE_BEAGLEBONE - default 0 + Send coreboot debug output to USB.
-endif # USBDEBUG + Configuration for USB hardware is under menu Generic Drivers.
# TODO: Deps? # TODO: Improve description. diff --git a/src/console/Makefile.inc b/src/console/Makefile.inc index 54d59cd..f158670 100644 --- a/src/console/Makefile.inc +++ b/src/console/Makefile.inc @@ -20,7 +20,7 @@ bootblock-y += die.c ramstage-$(CONFIG_CONSOLE_SERIAL8250) += uart8250_console.c ramstage-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem_console.c ramstage-$(CONFIG_SPKMODEM) += spkmodem_console.c -ramstage-$(CONFIG_USBDEBUG) += usbdebug_console.c +ramstage-$(CONFIG_CONSOLE_USB) += usbdebug_console.c ramstage-$(CONFIG_CONSOLE_NE2K) += ne2k_console.c ramstage-$(CONFIG_CONSOLE_CBMEM) += cbmem_console.c ramstage-$(CONFIG_CONSOLE_QEMU_DEBUGCON) += qemu_debugcon_console.c diff --git a/src/console/console.c b/src/console/console.c index e09625f..9e9e4e2 100644 --- a/src/console/console.c +++ b/src/console/console.c @@ -116,7 +116,7 @@ void console_init(void) #if CONFIG_SPKMODEM spkmodem_init(); #endif -#if CONFIG_USBDEBUG_IN_ROMSTAGE && !defined(__BOOT_BLOCK__) +#if CONFIG_CONSOLE_USB && CONFIG_USBDEBUG_IN_ROMSTAGE && !defined(__BOOT_BLOCK__) usbdebug_init(); #endif
diff --git a/src/drivers/Kconfig b/src/drivers/Kconfig index 01bed21..5267ff8 100644 --- a/src/drivers/Kconfig +++ b/src/drivers/Kconfig @@ -38,4 +38,5 @@ source src/drivers/spi/Kconfig source src/drivers/ti/Kconfig source src/drivers/trident/Kconfig source src/drivers/uart/Kconfig +source src/drivers/usb/Kconfig source src/drivers/xpowers/Kconfig diff --git a/src/drivers/usb/Kconfig b/src/drivers/usb/Kconfig new file mode 100644 index 0000000..28b95c6 --- /dev/null +++ b/src/drivers/usb/Kconfig @@ -0,0 +1,94 @@ + # Use "select HAVE_USBDEBUG" on southbridges which have Debug Port code. +config HAVE_USBDEBUG + bool + default y if HAVE_USBDEBUG_OPTIONS + default n + +# Use "select HAVE_USBDEBUG_OPTIONS" on southbridges with multiple +# EHCI controllers or multiple ports with Debug Port capability +config HAVE_USBDEBUG_OPTIONS + def_bool n + +config USBDEBUG + bool "USB 2.0 EHCI debug dongle support" + default n + depends on HAVE_USBDEBUG + help + This option allows you to use a so-called USB EHCI Debug device + (such as the Ajays NET20DC, AMIDebug RX, or a system using the + Linux "EHCI Debug Device gadget" driver found in recent kernel) + to retrieve the coreboot debug messages (instead, or in addition + to, a serial port). + + This feature is NOT supported on all chipsets in coreboot! + + It also requires a USB2 controller which supports the EHCI + Debug Port capability. + + See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list + of supported controllers. + + If unsure, say N. + +if USBDEBUG + +config USBDEBUG_IN_ROMSTAGE + bool "Enable early (pre-RAM) usbdebug" + default y + depends on EARLY_CBMEM_INIT && EARLY_CONSOLE + help + Configuring USB controllers in system-agent binary may cause + problems to usbdebug. Disabling this option delays usbdebug to + be setup on entry to ramstage. + + If unsure, say Y. + +config USBDEBUG_HCD_INDEX + int + default 0 + prompt "Index for EHCI controller to use with usbdebug" if HAVE_USBDEBUG_OPTIONS + help + Some boards have multiple EHCI controllers with possibly only + one having the Debug Port capability on an external USB port. + + Mapping of this index to PCI device functions is southbridge + specific and mainboard level Kconfig should already provide + a working default value here. + +config USBDEBUG_DEFAULT_PORT + int + default 0 + prompt "Default USB port to use as Debug Port" if HAVE_USBDEBUG_OPTIONS + help + Selects which physical USB port usbdebug dongle is connected to. + Setting of 0 means to scan possible ports starting from 1. + + Intel platforms have hardwired the debug port location and this + setting makes no difference there. + + Hence, if you select the correct port here, you can speed up + your boot time. Which USB port number refers to which actual + port on your mainboard (potentially also USB pin headers on + your mainboard) is highly board-specific, and you'll likely + have to find out by trial-and-error. + +choice + prompt "Type of dongle" + default USBDEBUG_DONGLE_STD + +config USBDEBUG_DONGLE_STD + bool "Net20DC or compatible" + +config USBDEBUG_DONGLE_BEAGLEBONE + bool "BeagleBone" + help + Use this to configure the USB hub on BeagleBone board. + +endchoice + +config USBDEBUG_OPTIONAL_HUB_PORT + int + default 2 if USBDEBUG_DONGLE_BEAGLEBONE + default 0 + +endif # USBDEBUG diff --git a/src/lib/coreboot_table.c b/src/lib/coreboot_table.c index 167eda0..2d84579 100644 --- a/src/lib/coreboot_table.c +++ b/src/lib/coreboot_table.c @@ -136,7 +136,7 @@ static struct lb_serial *lb_serial(struct lb_header *header) }
#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM || \ - CONFIG_CONSOLE_SERIAL_UART || CONFIG_USBDEBUG + CONFIG_CONSOLE_SERIAL_UART || CONFIG_CONSOLE_USB static void add_console(struct lb_header *header, u16 consoletype) { struct lb_console *console; @@ -156,7 +156,7 @@ static void lb_console(struct lb_header *header) #if CONFIG_CONSOLE_SERIAL8250MEM || CONFIG_CONSOLE_SERIAL_UART add_console(header, LB_TAG_CONSOLE_SERIAL8250MEM); #endif -#if CONFIG_USBDEBUG +#if CONFIG_CONSOLE_USB add_console(header, LB_TAG_CONSOLE_EHCI); #endif }
-
Kyösti Mälkki