[S] Change in coreboot[master]: device: Move D3COLD_SUPPORT symbol

[Lean Sheng Tan (Code Review)]

Lean Sheng Tan has submitted this change. ( https://review.coreboot.org/c/coreboot/+/74404 )

(

5 is the latest approved patch-set.
No files were changed between the latest approved patch-set and the submitted one.
 )Change subject: device: Move D3COLD_SUPPORT symbol
......................................................................

device: Move D3COLD_SUPPORT symbol

Move D3COLD_SUPPORT to device, so it can be used by multiple
SOCs.

Signed-off-by: Sean Rhodes 
Change-Id: Ie92736458ab95374c51346107665dc0fd1e653a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74404
Reviewed-by: Nico Huber 
Reviewed-by: Michael Niewöhner 
Tested-by: build bot (Jenkins) 
---
M src/device/Kconfig
M src/soc/intel/alderlake/Kconfig
2 files changed, 31 insertions(+), 14 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Nico Huber: Looks good to me, but someone else must approve
  Michael Niewöhner: Looks good to me, approved

diff --git a/src/device/Kconfig b/src/device/Kconfig
index ef73c40..cdd843c 100644
--- a/src/device/Kconfig
+++ b/src/device/Kconfig
@@ -998,6 +998,20 @@
    help
      Provides xHCI utility functions.

+config D3COLD_SUPPORT
+	bool
+	default y
+	help
+	  Enable this option if all devices on your system support the
+	  D3Cold power management state. The D3Cold state is a low-power
+	  state where the device has been powered down and is no longer
+	  able to maintain its context. This state can help reduce
+	  overall system power consumption, which can be beneficial for
+	  energy savings and thermal management.
+
+	  Please note that enabling D3Cold support may break system
+	  suspend-to-RAM (S3) functionality.
+
 source "src/device/dram/Kconfig"

endmenu
diff --git a/src/soc/intel/alderlake/Kconfig b/src/soc/intel/alderlake/Kconfig
index 9c80054..cce2052 100644
--- a/src/soc/intel/alderlake/Kconfig
+++ b/src/soc/intel/alderlake/Kconfig
@@ -332,20 +332,6 @@
    int
    default 8

-config D3COLD_SUPPORT
-	bool
-	default y
-	help
-	  Enable this option if all devices on your system support the
-	  D3Cold power management state. The D3Cold state is a low-power
-	  state where the device has been powered down and is no longer
-	  able to maintain its context. This state can help reduce
-	  overall system power consumption, which can be beneficial for
-	  energy savings and thermal management.
-
-	  Please note that enabling D3Cold support may break system
-	  suspend-to-RAM (S3) functionality.
-
 config ENABLE_SATA_TEST_MODE
    bool "Enable test mode for SATA margining"
    default n