Change in ...coreboot[master]: sb/intel/lynxpoint: Remove incomplete SATA ACPI code

[Tristan Corrick (Code Review)]

Tristan Corrick has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/30149

Change subject: sb/intel/lynxpoint: Remove incomplete SATA ACPI code
......................................................................

sb/intel/lynxpoint: Remove incomplete SATA ACPI code

The existing SATA ACPI code for Lynx Point implements some methods and
devices, but not completely. These methods are optional and only used in
IDE mode. The code was likely copied from bd82x6x, where it has since
been removed.

As a result, many remarks produced by iasl about unreferenced objects
are eliminated.

Tested on an ASRock H81M-HDS and an Acer C720. No issues with SATA
were observed.

Change-Id: I808a9dff7b9ba34239ffd95fa4cb9b39b10c4b62
Signed-off-by: Tristan Corrick 
---
M src/southbridge/intel/lynxpoint/acpi/sata.asl
1 file changed, 0 insertions(+), 52 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/49/30149/1

diff --git a/src/southbridge/intel/lynxpoint/acpi/sata.asl b/src/southbridge/intel/lynxpoint/acpi/sata.asl
index 44ce576..3c01893 100644
--- a/src/southbridge/intel/lynxpoint/acpi/sata.asl
+++ b/src/southbridge/intel/lynxpoint/acpi/sata.asl
@@ -22,56 +22,4 @@
 Device (SATA)
 {
    Name (_ADR, 0x001f0002)
-
-	Device (PRID)
-	{
-		Name (_ADR, 0)
-
-		// Get Timing Mode
-		Method (_GTM, 0, Serialized)
-		{
-			Name(PBUF, Buffer(20) {
-				0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-				0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-				0x00,0x00,0x00,0x00 })
-
-			CreateDwordField (PBUF,  0, PIO0)
-			CreateDwordField (PBUF,  4, DMA0)
-			CreateDwordField (PBUF,  8, PIO1)
-			CreateDwordField (PBUF, 12, DMA1)
-			CreateDwordField (PBUF, 16, FLAG)
-
-			// TODO fill return structure
-
-			Return (PBUF)
-		}
-
-		// Set Timing Mode
-		Method (_STM, 3)
-		{
-			CreateDwordField (Arg0,  0, PIO0)
-			CreateDwordField (Arg0,  4, DMA0)
-			CreateDwordField (Arg0,  8, PIO1)
-			CreateDwordField (Arg0, 12, DMA1)
-			CreateDwordField (Arg0, 16, FLAG)
-
-			// TODO: Do the deed
-		}
-
-		Device (DSK0)
-		{
-			Name (_ADR, 0)
-			// TODO: _RMV ?
-			// TODO: _GTF ?
-		}
-
-		Device (DSK1)
-		{
-			Name (_ADR, 1)
-
-			// TODO: _RMV ?
-			// TODO: _GTF ?
-		}
-
-	}
 }