Change in coreboot[master]: drivers/uart/uart8250reg.h: remove duplicate bit definitions

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/61642 )

Change subject: drivers/uart/uart8250reg.h: remove duplicate bit definitions
......................................................................

drivers/uart/uart8250reg.h: remove duplicate bit definitions

UART8250_FCR_RXSR is a redefinition of UART8250_FCR_CLEAR_RCVR,
UART8250_FCR_TXSR a redefinition of UART8250_FCR_CLEAR_XMIT and
UART8250_LCR_BKSE a redefinition of UART8250_LCR_DLAB. None of those
redefinitions are used, so just drop them.

Signed-off-by: Felix Held 
Change-Id: I6b9edae67180b04ff1c887c5742c07c774fc9c59
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61642
Tested-by: build bot (Jenkins) 
Reviewed-by: HAOUAS Elyes 
---
M src/drivers/uart/uart8250reg.h
1 file changed, 0 insertions(+), 4 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  HAOUAS Elyes: Looks good to me, approved

diff --git a/src/drivers/uart/uart8250reg.h b/src/drivers/uart/uart8250reg.h
index 28dc21c..573eb6f 100644
--- a/src/drivers/uart/uart8250reg.h
+++ b/src/drivers/uart/uart8250reg.h
@@ -34,9 +34,6 @@
 #define   UART8250_FCR_TRIGGER_8	0x80 /* Mask for trigger set at 8 */
 #define   UART8250_FCR_TRIGGER_14	0xC0 /* Mask for trigger set at 14 */

-#define   UART8250_FCR_RXSR		0x02 /* Receiver soft reset */
-#define   UART8250_FCR_TXSR		0x04 /* Transmitter soft reset */
-
 #define UART8250_LCR 0x03
 #define   UART8250_LCR_WLS_MSK	0x03 /* character length select mask */
 #define   UART8250_LCR_WLS_5	0x00 /* 5 bit character length */
@@ -48,7 +45,6 @@
 #define   UART8250_LCR_EPS	0x10 /* Even Parity Select */
 #define   UART8250_LCR_STKP	0x20 /* Stick Parity */
 #define   UART8250_LCR_SBRK	0x40 /* Set Break */
-#define   UART8250_LCR_BKSE	0x80 /* Bank select enable */
 #define   UART8250_LCR_DLAB	0x80 /* Divisor latch access bit */

#define UART8250_MCR 0x04