[S] Change in coreboot[main]: soc/intel/jasperlake: Set GPE_STS and GPE_EN register bases

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/78097?usp=email )

Change subject: soc/intel/jasperlake: Set GPE_STS and GPE_EN register bases
......................................................................

soc/intel/jasperlake: Set GPE_STS and GPE_EN register bases

Jasper Lake was missing these bases, so attempting to enable an SCI
would poke unrelated registers starting from offset 0.  Set them so
GPEs can be enabled.

GPE is used on the Librem 11 for the keyboard dock connector, its sense
signal on GPP_D4 raises a GPE which is used to indicate tablet/laptop
mode to the OS.

The register offsets are documented in the datasheet volume 2 (Intel
document 634545), all groups' GPE_STS/GPE_EN start at the same offsets.

Change-Id: Ib6b9b9a79e9cc4467e609eaf591ec4e87b78d617
Signed-off-by: Jonathon Hall 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78097
Reviewed-by: Eric Lai 
Tested-by: build bot (Jenkins) 
---
M src/soc/intel/jasperlake/gpio.c
M src/soc/intel/jasperlake/include/soc/gpio_defs.h
2 files changed, 12 insertions(+), 0 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Eric Lai: Looks good to me, approved

diff --git a/src/soc/intel/jasperlake/gpio.c b/src/soc/intel/jasperlake/gpio.c
index 42eb183..3376aaa 100644
--- a/src/soc/intel/jasperlake/gpio.c
+++ b/src/soc/intel/jasperlake/gpio.c
@@ -74,6 +74,8 @@
    	.host_own_reg_0 = HOSTSW_OWN_REG_0,
    	.gpi_int_sts_reg_0 = GPI_INT_STS_0,
    	.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_gpe_sts_reg_0 = GPI_GPE_STS_0,
+		.gpi_gpe_en_reg_0 = GPI_GPE_EN_0,
    	.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
    	.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
    	.gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
@@ -96,6 +98,8 @@
    	.host_own_reg_0 = HOSTSW_OWN_REG_0,
    	.gpi_int_sts_reg_0 = GPI_INT_STS_0,
    	.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_gpe_sts_reg_0 = GPI_GPE_STS_0,
+		.gpi_gpe_en_reg_0 = GPI_GPE_EN_0,
    	.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
    	.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
    	.gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
@@ -118,6 +122,8 @@
    	.host_own_reg_0 = HOSTSW_OWN_REG_0,
    	.gpi_int_sts_reg_0 = GPI_INT_STS_0,
    	.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_gpe_sts_reg_0 = GPI_GPE_STS_0,
+		.gpi_gpe_en_reg_0 = GPI_GPE_EN_0,
    	.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
    	.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
    	.max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
@@ -138,6 +144,8 @@
    	.host_own_reg_0 = HOSTSW_OWN_REG_0,
    	.gpi_int_sts_reg_0 = GPI_INT_STS_0,
    	.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_gpe_sts_reg_0 = GPI_GPE_STS_0,
+		.gpi_gpe_en_reg_0 = GPI_GPE_EN_0,
    	.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
    	.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
    	.gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
@@ -160,6 +168,8 @@
    	.host_own_reg_0 = HOSTSW_OWN_REG_0,
    	.gpi_int_sts_reg_0 = GPI_INT_STS_0,
    	.gpi_int_en_reg_0 = GPI_INT_EN_0,
+		.gpi_gpe_sts_reg_0 = GPI_GPE_STS_0,
+		.gpi_gpe_en_reg_0 = GPI_GPE_EN_0,
    	.gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
    	.gpi_smi_en_reg_0 = GPI_SMI_EN_0,
    	.gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
diff --git a/src/soc/intel/jasperlake/include/soc/gpio_defs.h b/src/soc/intel/jasperlake/include/soc/gpio_defs.h
index 8f6f5f7..09d50e7 100644
--- a/src/soc/intel/jasperlake/include/soc/gpio_defs.h
+++ b/src/soc/intel/jasperlake/include/soc/gpio_defs.h
@@ -249,6 +249,8 @@
 #define HOSTSW_OWN_REG_0			0xc0
 #define GPI_INT_STS_0				0x100
 #define GPI_INT_EN_0				0x120
+#define GPI_GPE_STS_0				0x140
+#define GPI_GPE_EN_0				0x160
 #define GPI_SMI_STS_0				0x180
 #define GPI_SMI_EN_0				0x1a0
 #define GPI_NMI_STS_0				0x1c0