New patch to review for coreboot: 3fab155 exynos: Install the BL1 and set the checksum in the Makefile.
Isaac Christensen (isaac.christensen@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6834
-gerrit
commit 3fab1555e8202246f3a8fdbfd6d85e27f8b06a95 Author: Gabe Black gabeblack@google.com Date: Sun Dec 8 12:48:45 2013 -0800
exynos: Install the BL1 and set the checksum in the Makefile.
Install the BL1 and set up the checksum in the Makefile instead of relying on post processing. Import the exynos checksum script, split it in two and simplify it significantly. Stop putting the CBFS header in the midst of the bootblock so that it can be checksummed before CBFS is put together. Stop saving space for it and leaving an anchor in the bootblock which nobody looks for.
Change-Id: Icbb5a5914ece60b2827433b6dc29d80db996ea6c Signed-off-by: Gabe Black gabeblack@google.com Reviewed-on: https://chromium-review.googlesource.com/179229 Reviewed-by: Ronald Minnich rminnich@chromium.org Commit-Queue: Gabe Black gabeblack@chromium.org Tested-by: Gabe Black gabeblack@chromium.org (cherry picked from commit aa3a416705517c0a6ddfdeb19905ac8cafb33df1) Signed-off-by: Isaac Christensen isaac.christensen@se-eng.com --- src/arch/arm/armv7/bootblock.S | 12 +---------- src/soc/samsung/exynos5250/Kconfig | 11 +++++----- src/soc/samsung/exynos5250/Makefile.inc | 17 +++++++-------- src/soc/samsung/exynos5420/Kconfig | 6 +++--- src/soc/samsung/exynos5420/Makefile.inc | 17 +++++++-------- util/exynos/fixed_cksum.py | 37 +++++++++++++++++++++++++++++++++ util/exynos/variable_cksum.py | 37 +++++++++++++++++++++++++++++++++ 7 files changed, 98 insertions(+), 39 deletions(-)
diff --git a/src/arch/arm/armv7/bootblock.S b/src/arch/arm/armv7/bootblock.S index b28a787..82bd79e 100644 --- a/src/arch/arm/armv7/bootblock.S +++ b/src/arch/arm/armv7/bootblock.S @@ -31,17 +31,7 @@
.section ".start", "a", %progbits .globl _start -_start: b reset - .balignl 16,0xdeadbeef - -_cbfs_master_header: - /* The CBFS master header is inserted by cbfstool at the first - * aligned offset after the above anchor string is found. - * Hence, we leave some space for it. - */ - .skip 128 @ Assumes 64-byte alignment - -reset: +_start: /* * Set the cpu to System mode with IRQ and FIQ disabled. Prefetch/Data * aborts may happen early and crash before the abort handlers are diff --git a/src/soc/samsung/exynos5250/Kconfig b/src/soc/samsung/exynos5250/Kconfig index 2b4ad39..8d7c867 100644 --- a/src/soc/samsung/exynos5250/Kconfig +++ b/src/soc/samsung/exynos5250/Kconfig @@ -15,21 +15,22 @@ if CPU_SAMSUNG_EXYNOS5250 # # 0x0000: vendor-provided BL1 (8k). # 0x2000: bootblock -# 0x2010-0x2090: reserved for CBFS master header. -# 0xA000: Free for CBFS data. +# 0x9FFC-0xA000: BL2 checksum +# 0xA000-0xA080: reserved for CBFS master header. +# 0xA080: Free for CBFS data.
config BOOTBLOCK_ROM_OFFSET hex - default 0x2000 + default 0
config CBFS_HEADER_ROM_OFFSET hex "offset of master CBFS header in ROM" - default 0x2010 + default 0x9F80
config CBFS_ROM_OFFSET # Calculated by BOOTBLOCK_ROM_OFFSET + max bootblock size. hex "offset of CBFS data in ROM" - default 0x0A000 + default 0x0A080
config SYS_SDRAM_BASE hex diff --git a/src/soc/samsung/exynos5250/Makefile.inc b/src/soc/samsung/exynos5250/Makefile.inc index a15bc9c..cc89f2d 100644 --- a/src/soc/samsung/exynos5250/Makefile.inc +++ b/src/soc/samsung/exynos5250/Makefile.inc @@ -50,13 +50,10 @@ ramstage-y += fb.c ramstage-y += usb.c ramstage-y += cbmem.c
-# Run an intermediate step when producing coreboot.rom -# that adds additional components to the final firmware -# image outside of CBFS -.PHONY: exynos5250_add_bl1 -$(obj)/coreboot.rom: exynos5250_add_bl1 -exynos5250_add_bl1: $(obj)/coreboot.pre - printf " DD Adding Samsung Exynos5250 BL1\n" - # TODO(hungte) Change this 'cpu' to soc when build scripts are changed. - dd if=3rdparty/cpu/samsung/exynos5250/bl1.bin \ - of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1 +$(objcbfs)/bootblock.raw.elf: $(objcbfs)/bootblock.elf + cp $< $@ + +$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin + @printf " BL1, CKSUM $(subst $(obj)/,,$(@))\n" + util/exynos/fixed_cksum.py $< $<.cksum 32768 + cat 3rdparty/cpu/samsung/exynos5250/bl1.bin $<.cksum > $@ diff --git a/src/soc/samsung/exynos5420/Kconfig b/src/soc/samsung/exynos5420/Kconfig index a0d6c98..904091e 100644 --- a/src/soc/samsung/exynos5420/Kconfig +++ b/src/soc/samsung/exynos5420/Kconfig @@ -17,16 +17,16 @@ if CPU_SAMSUNG_EXYNOS5420 # 0x0000: vendor-provided BL1 (8k). # 0x2000: variable length bootblock checksum header # 0x2010: bootblock -# 0x2020-0x20A0: reserved for CBFS master header. +# 0x9F80-0xA000: reserved for CBFS master header. # 0xA000: Free for CBFS data.
config BOOTBLOCK_ROM_OFFSET hex - default 0x2010 + default 0
config CBFS_HEADER_ROM_OFFSET hex "offset of master CBFS header in ROM" - default 0x2020 + default 0x9F80
config CBFS_ROM_OFFSET # Calculated by BOOTBLOCK_ROM_OFFSET + max bootblock size. diff --git a/src/soc/samsung/exynos5420/Makefile.inc b/src/soc/samsung/exynos5420/Makefile.inc index ef77b1b..5f37e7e 100644 --- a/src/soc/samsung/exynos5420/Makefile.inc +++ b/src/soc/samsung/exynos5420/Makefile.inc @@ -50,13 +50,10 @@ ramstage-y += dp.c dp_lowlevel.c fimd.c ramstage-y += usb.c ramstage-y += cbmem.c
-# Run an intermediate step when producing coreboot.rom -# that adds additional components to the final firmware -# image outside of CBFS -.PHONY: exynos5420_add_bl1 -$(obj)/coreboot.rom: exynos5420_add_bl1 -exynos5420_add_bl1: $(obj)/coreboot.pre - printf " DD Adding Samsung Exynos5420 BL1\n" - # TODO(hungte) Change this 'cpu' to soc when build scripts are changed. - dd if=3rdparty/cpu/samsung/exynos5420/bl1.bin \ - of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1 +$(objcbfs)/bootblock.raw.elf: $(objcbfs)/bootblock.elf + cp $< $@ + +$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin + @printf " BL1, CKSUM $(subst $(obj)/,,$(@))\n" + util/exynos/variable_cksum.py $< $<.cksum + cat 3rdparty/cpu/samsung/exynos5420/bl1.bin $<.cksum > $@ diff --git a/util/exynos/fixed_cksum.py b/util/exynos/fixed_cksum.py new file mode 100755 index 0000000..79a206a --- /dev/null +++ b/util/exynos/fixed_cksum.py @@ -0,0 +1,37 @@ +#!/usr/bin/env python +# Copyright (c) 2013 The Chromium OS Authors. All rights reserved. +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. + +""" +This utility computes and fills Exynos ROM checksum (for BL1 or BL2). +(Algorithm from U-Boot: tools/mkexynosspl.c) + +Input: IN OUT DATA_SIZE + +Output: + + IN padded out to DATA_SIZE, checksum at the end, written to OUT. +""" + +import struct +import sys + +def main(argv): + if len(argv) != 4: + exit('usage: %s IN OUT DATA_SIZE' % argv[0]) + + in_name, out_name = argv[1:3] + size = int(argv[3], 0) + checksum_format = "<I" + with open(in_name, "rb") as in_file, open(out_name, "wb") as out_file: + data = in_file.read() + checksum_size = struct.calcsize(checksum_format) + data_size = size - checksum_size + assert len(data) <= data_size + checksum = struct.pack(checksum_format, sum(map(ord, data))) + out_file.write(data + bytearray(data_size - len(data)) + checksum) + + +if __name__ == '__main__': + main(sys.argv) diff --git a/util/exynos/variable_cksum.py b/util/exynos/variable_cksum.py new file mode 100755 index 0000000..25c7c0a --- /dev/null +++ b/util/exynos/variable_cksum.py @@ -0,0 +1,37 @@ +#!/usr/bin/env python +# Copyright (c) 2013 The Chromium OS Authors. All rights reserved. +# Use of this source code is governed by a BSD-style license that can be +# found in the LICENSE file. + +""" +This utility computes and fills Exynos ROM checksum (for BL1 or BL2). +(Algorithm from U-Boot: tools/mkexynosspl.c) + +Input: IN OUT + +Output: + + Checksum header added to IN and written to OUT. + Header: uint32_t size, checksum, reserved[2]. +""" + +import struct +import sys + +def main(argv): + if len(argv) != 3: + exit('usage: %s IN OUT' % argv[0]) + + in_name, out_name = argv[1:3] + header_format = "<IIII" + with open(in_name, "rb") as in_file, open(out_name, "wb") as out_file: + data = in_file.read() + header = struct.pack(header_format, + struct.calcsize(header_format) + len(data), + sum(map(ord, data)), + 0, 0) + out_file.write(header + data) + + +if __name__ == '__main__': + main(sys.argv)
-
Isaac Christensen