Hello build bot (Jenkins), Werner Zeh,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/63862
to look at the new patch set (#3).
Change subject: mb/siemens/mc_ehl2: Adjust PSE TSN settings in devicetree ......................................................................
mb/siemens/mc_ehl2: Adjust PSE TSN settings in devicetree
This mainboard uses all three internal Ethernet GbE-TSN controllers. Two of them reside in PCH including Intel Programmable Services Engine (PSE) and are controlled by these. This patch enables the Serial Gigabit Media Independent Interface (SGMII) mode for GbE PSE0 and GbE PSE1. By setting PCH PSE DMA pins to host owned, the IO is under control of the IA processor cores through system software. And furthermore, the PCH TSN Link speed is set to 1 Gbps.
TEST: - Boot mc_ehl2 into Linux and check inet addr via ifconfig
Change-Id: I74e660548b2c44d5dbdb6023d5a36cfdd7e96f43 Signed-off-by: Mario Scheithauer mario.scheithauer@siemens.com --- M src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb 1 file changed, 5 insertions(+), 1 deletion(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/62/63862/3