Patch set updated for coreboot: 8687b8a snow/exynos5250: move board-specific power stuff to mainboard dir
David Hendricks (dhendrix@chromium.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/3034
-gerrit
commit 8687b8aa6c915ce41dbb344f9aa4ca5a91c94117 Author: David Hendricks dhendrix@chromium.org Date: Fri Apr 5 15:38:12 2013 -0700
snow/exynos5250: move board-specific power stuff to mainboard dir
This moves highly board-specific code out from the Exynos5250 power_init() into Snow's romstage.c. There's no reason the CPU- specific code should care about which PMIC we are using and which bus it is on.
Change-Id: I52313177395519cddcab11225fc23d5e50c4c4e3 Signed-off-by: David Hendricks dhendrix@chromium.org --- src/cpu/samsung/exynos5250/power.c | 60 +----------------------------------- src/mainboard/google/snow/romstage.c | 54 +++++++++++++++++++++++++++++--- 2 files changed, 50 insertions(+), 64 deletions(-)
diff --git a/src/cpu/samsung/exynos5250/power.c b/src/cpu/samsung/exynos5250/power.c index 953bf5c..ffba8c5 100644 --- a/src/cpu/samsung/exynos5250/power.c +++ b/src/cpu/samsung/exynos5250/power.c @@ -30,10 +30,6 @@ #include <cpu/samsung/exynos5250/cpu.h> #include <cpu/samsung/exynos5250/power.h> #include <cpu/samsung/exynos5250/sysreg.h> -#include <drivers/maxim/max77686/max77686.h> - -#include "device/i2c.h" -#include "cpu/samsung/exynos5-common/i2c.h"
static void ps_hold_setup(void) { @@ -130,64 +126,10 @@ void power_exit_wakeup(void) ((resume_func)power->inform0)(); }
-/** - * Initialize the pmic voltages to power up the system - * This also calls i2c_init so that we can program the pmic - * - * REG_ENABLE = 0, needed to set the buck/ldo enable bit ON - * - * @return Return 0 if ok, else -1 - */ int power_init(void) { - int error = 0; - - /* - * FIXME(dhendrix): We will re-factor the caller of power_init() - * to start from a board-specific romstage file and do the i2c - * early setup. There is no reason CPU power init code should - * mess with board-specific i2c parameters. - */ - /* Set the i2c register address base so i2c works before FDT */ - i2c_set_early_reg(0x12c60000); - ps_hold_setup(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - /* - * We're using CR1616 coin cell battery that is non-rechargeable - * battery. But, BBCHOSTEN bit of the BBAT Charger Register in - * MAX77686 is enabled by default for charging coin cell. - * - * Also, we cannot meet the coin cell reverse current spec. in UL - * standard if BBCHOSTEN bit is enabled. - * - * Disable Coin BATT Charging - */ - error = max77686_disable_backup_batt(); - - error |= max77686_volsetting(PMIC_BUCK2, CONFIG_VDD_ARM_MV, - REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_BUCK3, CONFIG_VDD_INT_UV, - REG_ENABLE, MAX77686_UV); - error |= max77686_volsetting(PMIC_BUCK1, CONFIG_VDD_MIF_MV, - REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_BUCK4, CONFIG_VDD_G3D_MV, - REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_LDO2, CONFIG_VDD_LDO2_MV, - REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_LDO3, CONFIG_VDD_LDO3_MV, - REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_LDO5, CONFIG_VDD_LDO5_MV, - REG_ENABLE, MAX77686_MV); - error |= max77686_volsetting(PMIC_LDO10, CONFIG_VDD_LDO10_MV, - REG_ENABLE, MAX77686_MV); - if (error != 0) { - power_shutdown(); - printk(BIOS_ERR, "power init failed\n"); - } - - return error; + return 0; }
void power_enable_xclkout(void) diff --git a/src/mainboard/google/snow/romstage.c b/src/mainboard/google/snow/romstage.c index 39069b2..ca7ba9c 100644 --- a/src/mainboard/google/snow/romstage.c +++ b/src/mainboard/google/snow/romstage.c @@ -35,6 +35,9 @@ #include <console/console.h> #include <arch/stages.h>
+#include <drivers/maxim/max77686/max77686.h> +#include <device/i2c.h> + #include "mainboard.h"
#define MMC0_GPIO_PIN (58) @@ -52,6 +55,45 @@ static int board_wakeup_permitted(void) } #endif
+static int setup_pmic(void) +{ + int error = 0; + + /* + * We're using CR1616 coin cell battery that is non-rechargeable + * battery. But, BBCHOSTEN bit of the BBAT Charger Register in + * MAX77686 is enabled by default for charging coin cell. + * + * Also, we cannot meet the coin cell reverse current spec. in UL + * standard if BBCHOSTEN bit is enabled. + * + * Disable Coin BATT Charging + */ + error = max77686_disable_backup_batt(); + + error |= max77686_volsetting(PMIC_BUCK2, CONFIG_VDD_ARM_MV, + REG_ENABLE, MAX77686_MV); + error |= max77686_volsetting(PMIC_BUCK3, CONFIG_VDD_INT_UV, + REG_ENABLE, MAX77686_UV); + error |= max77686_volsetting(PMIC_BUCK1, CONFIG_VDD_MIF_MV, + REG_ENABLE, MAX77686_MV); + error |= max77686_volsetting(PMIC_BUCK4, CONFIG_VDD_G3D_MV, + REG_ENABLE, MAX77686_MV); + error |= max77686_volsetting(PMIC_LDO2, CONFIG_VDD_LDO2_MV, + REG_ENABLE, MAX77686_MV); + error |= max77686_volsetting(PMIC_LDO3, CONFIG_VDD_LDO3_MV, + REG_ENABLE, MAX77686_MV); + error |= max77686_volsetting(PMIC_LDO5, CONFIG_VDD_LDO5_MV, + REG_ENABLE, MAX77686_MV); + error |= max77686_volsetting(PMIC_LDO10, CONFIG_VDD_LDO10_MV, + REG_ENABLE, MAX77686_MV); + + if (error) + printk(BIOS_CRIT, "%s: Error during PMIC setup\n", __func__); + + return error; +} + static void initialize_s5p_mshc(void) { /* MMC0: Fixed, 8 bit mode, connected with GPIO. */ @@ -90,11 +132,13 @@ void main(void) system_clock_init(mem, arm_ratios);
console_init(); - /* - * FIXME: Do necessary I2C init so low-level PMIC code doesn't need to. - * Also, we should only call power_init() on cold boot. - */ - power_init(); + + i2c_set_early_reg(0x12c60000); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (power_init()) + power_shutdown(); + if (setup_pmic()) + power_shutdown();
if (!mem) { printk(BIOS_CRIT, "Unable to auto-detect memory timings\n");
-
David Hendricks