Jeremy Soller has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/43624 )
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are corrected
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/43624/1
diff --git a/src/mainboard/system76/lemp9/devicetree.cb b/src/mainboard/system76/lemp9/devicetree.cb index 27f5efb..3a158ed 100644 --- a/src/mainboard/system76/lemp9/devicetree.cb +++ b/src/mainboard/system76/lemp9/devicetree.cb @@ -25,8 +25,8 @@ # CPU (soc/intel/cannonlake/cpu.c) # Power limit register "power_limits_config" = "{ - .tdp_pl1_override = 15, - .tdp_pl2_override = 25, + .tdp_pl1_override = 20, + .tdp_pl2_override = 30, }"
# Enable "Intel Speed Shift Technology"
Angel Pons has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/43624 )
Change subject: mb/system76/lemp9: update power limits ......................................................................
Patch Set 1: Code-Review+1
(1 comment)
https://review.coreboot.org/c/coreboot/+/43624/1//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/43624/1//COMMIT_MSG@9 PS1, Line 9: Tested on lemp9, power limits are corrected Why were previous power limits wrong? Any references used to determine the correct values?
Hello build bot (Jenkins), Angel Pons,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/43624
to look at the new patch set (#2).
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle.
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/43624/2
Angel Pons has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/43624 )
Change subject: mb/system76/lemp9: update power limits ......................................................................
Patch Set 4: Code-Review+1
(1 comment)
https://review.coreboot.org/c/coreboot/+/43624/1//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/43624/1//COMMIT_MSG@9 PS1, Line 9: Tested on lemp9, power limits are corrected
Why were previous power limits wrong? Any references used to determine the correct values?
Done
Hello build bot (Jenkins), Angel Pons,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/43624
to look at the new patch set (#7).
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle.
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/43624/7
Hello build bot (Jenkins), Angel Pons,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/43624
to look at the new patch set (#8).
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle.
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/43624/8
Michael Niewöhner has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/43624 )
Change subject: mb/system76/lemp9: update power limits ......................................................................
Patch Set 8: Code-Review+1
Hello build bot (Jenkins), Angel Pons, Michael Niewöhner,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/43624
to look at the new patch set (#12).
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle.
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/43624/12
Hello build bot (Jenkins), Angel Pons, Michael Niewöhner,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/43624
to look at the new patch set (#16).
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle.
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/43624/16
Hello build bot (Jenkins), Angel Pons, Michael Niewöhner,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/43624
to look at the new patch set (#18).
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle.
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/43624/18
Michael Niewöhner has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/43624 )
Change subject: mb/system76/lemp9: update power limits ......................................................................
Patch Set 19:
(1 comment)
https://review.coreboot.org/c/coreboot/+/43624/19//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/43624/19//COMMIT_MSG@10 PS19, Line 10: the thermal system can handle I'd like to see some note here how that was tested/determined
Hello build bot (Jenkins), Angel Pons, Michael Niewöhner,
I'd like you to reexamine a change. Please visit
https://review.coreboot.org/c/coreboot/+/43624
to look at the new patch set (#20).
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle. This was determined by increasing the values and running the system at 100% CPU utilization until thermal throttling occured and the chassis temperature became uncomfortable.
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/24/43624/20
Michael Niewöhner has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/43624 )
Change subject: mb/system76/lemp9: update power limits ......................................................................
Patch Set 20: Code-Review+2
(1 comment)
https://review.coreboot.org/c/coreboot/+/43624/19//COMMIT_MSG Commit Message:
https://review.coreboot.org/c/coreboot/+/43624/19//COMMIT_MSG@10 PS19, Line 10: the thermal system can handle
I'd like to see some note here how that was tested/determined
Done
Michael Niewöhner has submitted this change. ( https://review.coreboot.org/c/coreboot/+/43624 )
Change subject: mb/system76/lemp9: update power limits ......................................................................
mb/system76/lemp9: update power limits
Tested on lemp9, power limits are adjusted from the previously low values to the values the thermal system can handle. This was determined by increasing the values and running the system at 100% CPU utilization until thermal throttling occured and the chassis temperature became uncomfortable.
Signed-off-by: Jeremy Soller jeremy@system76.com Change-Id: I5e176e9d98376f8e2dc415e4397efc456869e72d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43624 Reviewed-by: Michael Niewöhner foss@mniewoehner.de Reviewed-by: Angel Pons th3fanbus@gmail.com Tested-by: build bot (Jenkins) no-reply@coreboot.org --- M src/mainboard/system76/lemp9/devicetree.cb 1 file changed, 2 insertions(+), 2 deletions(-)
Approvals: build bot (Jenkins): Verified Angel Pons: Looks good to me, but someone else must approve Michael Niewöhner: Looks good to me, approved
diff --git a/src/mainboard/system76/lemp9/devicetree.cb b/src/mainboard/system76/lemp9/devicetree.cb index 1b11033..e7e68e8 100644 --- a/src/mainboard/system76/lemp9/devicetree.cb +++ b/src/mainboard/system76/lemp9/devicetree.cb @@ -25,8 +25,8 @@ # CPU (soc/intel/cannonlake/cpu.c) # Power limit register "power_limits_config" = "{ - .tdp_pl1_override = 15, - .tdp_pl2_override = 25, + .tdp_pl1_override = 20, + .tdp_pl2_override = 30, }"
# Enable "Intel Speed Shift Technology"
9elements QA has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/43624 )
Change subject: mb/system76/lemp9: update power limits ......................................................................
Patch Set 21:
Automatic boot test returned (PASS/FAIL/TOTAL): 8/1/9 "QEMU x86 q35/ich9" (x86_32) using payload TianoCore : SUCCESS : https://lava.9esec.io/r/19896 "QEMU x86 q35/ich9" (x86_32) using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/19895 "QEMU x86 i440fx/piix4" (x86_64) using payload SeaBIOS : FAIL : https://lava.9esec.io/r/19894 "QEMU x86 i440fx/piix4" (x86_32) using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/19893 "QEMU AArch64" using payload LinuxBoot_u-root_kexec : SUCCESS : https://lava.9esec.io/r/19892 "HP Z220 SFF Workstation" (x86_32) using payload LinuxBoot_BusyBox_kexec : SUCCESS : https://lava.9esec.io/r/19900 "HP Z220 SFF Workstation" (x86_32) using payload LinuxBoot_BusyBox_kexec : SUCCESS : https://lava.9esec.io/r/19899 "HP Compaq 8200 Elite SFF PC" (x86_32) using payload TianoCore : SUCCESS : https://lava.9esec.io/r/19898 "HP Compaq 8200 Elite SFF PC" (x86_32) using payload SeaBIOS : SUCCESS : https://lava.9esec.io/r/19897
Please note: This test is under development and might not be accurate at all!