New patch to review for coreboot: skylake: remove the gpio_fsp.h usage as skylake boards move gpio config to coreboot completely
Patrick Georgi (pgeorgi@google.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/11426
-gerrit
commit 3e6c9b5bd3e74ee4c0a07d98c8ac152392730959 Author: robbie zhang robbie.zhang@intel.com Date: Fri Aug 21 11:12:58 2015 -0700
skylake: remove the gpio_fsp.h usage as skylake boards move gpio config to coreboot completely
BUG=None BRANCH=None TEST=Built and booted kunimitsu. CQ-DEPEND=CL:295012
Change-Id: I78e16e8079c4ee0c4fa70cb7a74ba039ee89398f Signed-off-by: Patrick Georgi patrick@georgi-clan.de Original-Commit-Id: 6f1db1a2ffdbeb7dd21b4894f74d3feb44d69c49 Original-Change-Id: I8aafb0ef7d1b77cb8d386f4e73dc46ea3d8ee3a4 Original-Signed-off-by: robbie zhang robbie.zhang@intel.com Original-Reviewed-on: https://chromium-review.googlesource.com/294758 Original-Reviewed-by: Aaron Durbin adurbin@chromium.org Original-Tested-by: Wenkai Du wenkai.du@intel.com --- src/soc/intel/skylake/include/soc/gpio.h | 1 - src/soc/intel/skylake/include/soc/gpio_fsp.h | 512 --------------------------- 2 files changed, 513 deletions(-)
diff --git a/src/soc/intel/skylake/include/soc/gpio.h b/src/soc/intel/skylake/include/soc/gpio.h index 56fd52e..84d2a70 100644 --- a/src/soc/intel/skylake/include/soc/gpio.h +++ b/src/soc/intel/skylake/include/soc/gpio.h @@ -26,7 +26,6 @@ #ifndef __ACPI__ #include <stdint.h> #include <stddef.h> -#include <soc/gpio_fsp.h>
typedef uint32_t gpio_t;
diff --git a/src/soc/intel/skylake/include/soc/gpio_fsp.h b/src/soc/intel/skylake/include/soc/gpio_fsp.h deleted file mode 100644 index cedbf82..0000000 --- a/src/soc/intel/skylake/include/soc/gpio_fsp.h +++ /dev/null @@ -1,512 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2014 Google Inc. - * Copyright (C) 2015 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef _SOC_GPIO_FSP_H_ -#define _SOC_GPIO_FSP_H_ - -#include <stdint.h> - -/* - * GPP_Ax to GPP_Gx; - * where x=24 [between GPIO Community A to F] - * = 7 [only for GPIO Community G] - */ -#define MAX_GPIO_NUMBER 151 /* zero based */ -#define GPIO_LIST_END 0xffffffff - -/* - * Skylake LP GPIO PIN to Pad Mapping - */ -#define GPIO_LP_GROUP_A 0x0 -#define GPIO_LP_GROUP_B 0x1 -#define GPIO_LP_GROUP_C 0x2 -#define GPIO_LP_GROUP_D 0x3 -#define GPIO_LP_GROUP_E 0x4 -#define GPIO_LP_GROUP_F 0x5 -#define GPIO_LP_GROUP_G 0x6 - -#define GPIO_LP_GROUP_GPP_A 0x0200 -#define GPIO_LP_GROUP_GPP_B 0x0201 -#define GPIO_LP_GROUP_GPP_C 0x0202 -#define GPIO_LP_GROUP_GPP_D 0x0203 -#define GPIO_LP_GROUP_GPP_E 0x0204 -#define GPIO_LP_GROUP_GPP_F 0x0205 -#define GPIO_LP_GROUP_GPP_G 0x0206 - -#define GPIO_GROUP_SHIFT 16 -#define MAX_GPIO_PIN_PER_GROUP 24 - -/* GPIO TX STATE */ -#define B_PCH_GPIO_TX_STATE 0x0001 -#define N_PCH_GPIO_TX_STATE 0 - -/* Interrupt number */ -#define B_PCH_GPIO_INTSEL 0x7F -#define N_PCH_GPIO_INTSEL 0 - -/* Structure for storing information about registers offset, community, - * maximal pad number, smi status and smi enable for available groups - */ -typedef struct { - u32 community; - u32 padcfgoffset; - u32 padpergroup; - u32 smistsoffset; - u32 smienoffset; -} GPIO_GROUP_INFO; - -/* - * GPIO Community 0 Registers are for GPP_A and GPP_B groups - */ -#define R_PCH_PCR_GPIO_GPP_A_PADCFG_OFFSET 0x400 -#define R_PCH_PCR_GPIO_GPP_B_PADCFG_OFFSET 0x4C0 -#define R_PCH_PCR_GPIO_GPP_A_SMI_STS 0x0180 -#define R_PCH_PCR_GPIO_GPP_B_SMI_STS 0x0184 -#define R_PCH_PCR_GPIO_GPP_A_SMI_EN 0x01A0 -#define R_PCH_PCR_GPIO_GPP_B_SMI_EN 0x01A4 - -/* - * GPIO Community 1 Registers are for GPP_C, GPP_D, GPP_E groups - */ -#define R_PCH_PCR_GPIO_GPP_C_PADCFG_OFFSET 0x400 -#define R_PCH_PCR_GPIO_GPP_D_PADCFG_OFFSET 0x4C0 -#define R_PCH_PCR_GPIO_GPP_E_PADCFG_OFFSET 0x580 -#define R_PCH_PCR_GPIO_GPP_C_SMI_STS 0x0180 -#define R_PCH_PCR_GPIO_GPP_D_SMI_STS 0x0184 -#define R_PCH_PCR_GPIO_GPP_E_SMI_STS 0x0188 -#define R_PCH_PCR_GPIO_GPP_C_SMI_EN 0x01A0 -#define R_PCH_PCR_GPIO_GPP_D_SMI_EN 0x01A4 -#define R_PCH_PCR_GPIO_GPP_E_SMI_EN 0x01A8 - -/* - * GPIO Community 3 Registers are for GPP_F and GPP_G groups - */ -#define R_PCH_PCR_GPIO_GPP_F_PADCFG_OFFSET 0x400 -#define R_PCH_PCR_GPIO_GPP_G_PADCFG_OFFSET 0x4C0 - -/* - * GPIO Community 2 Registers are for GPP_DSW - */ -#define R_PCH_PCR_GPIO_GPD_PADCFG_OFFSET 0x400 - -#define READ 0 -#define WRITE 1 - -/* If in GPIO_GROUP_INFO structure certain register doesn't exist - * it will have value equal to NO_REGISTER_PROPERTY - */ -#define NO_REGISTER_PROPERTY (~0u) - -#define V_PCH_GPIO_GPP_A_PAD_MAX 24 -#define V_PCH_GPIO_GPP_B_PAD_MAX 24 -#define V_PCH_GPIO_GPP_C_PAD_MAX 24 -#define V_PCH_GPIO_GPP_D_PAD_MAX 24 -#define V_PCH_GPIO_GPP_E_PAD_MAX 24 -#define V_PCH_GPIO_GPP_F_PAD_MAX 24 -#define V_PCH_GPIO_GPP_G_PAD_MAX 8 -#define V_PCH_GPIO_GPD_PAD_MAX 12 - -#define GPIO_GET_GROUP_INDEX(group) (group & 0xFF) -#define GPIO_GET_GROUP_INDEX_FROM_PAD(pad) (\ - GPIO_GET_GROUP_INDEX((pad >> 16))) -#define GPIO_GET_PAD_NUMBER(pad) (pad & 0xFFFF) - -/* Number of pins used by SerialIo controllers */ -#define PCH_SERIAL_IO_PINS_PER_UART_CONTROLLER 4 -#define PCH_SERIAL_IO_PINS_PER_UART_CONTROLLER_NO_FLOW_CTRL 2 - -/* Below defines are based on GPIO_CONFIG structure fields */ -#define GPIO_CONF_PAD_MODE_MASK 0xF -#define GPIO_CONF_PAD_MODE_BIT_POS 0 - -/* GPIO Pad Mode */ -#define B_PCH_GPIO_PAD_MODE (0x1000 | 0x800 | 0x400) -#define N_PCH_GPIO_PAD_MODE 10 - -/* For any GpioPad usage in code use GPIO_PAD type*/ -typedef u32 GPIO_PAD; - -/* For any GpioGroup usage in code use GPIO_GROUP type */ -typedef u32 GPIO_GROUP; - -/* - * GPIO configuration structure used for pin programming. - * Structure contains fields that can be used to configure pad. - */ -typedef struct { - /* - Pad Mode - Pad can be set as GPIO or one of its native functions. - When in native mode setting Direction, OutputState, Interrupt is unnecessary. - Refer to definition of GPIO_PAD_MODE. - Refer to EDS for each native mode according to the pad. - */ - u32 PadMode : 4; - /* - Host Software Pad Ownership - Set pad to ACPI mode or GPIO Driver Mode. - Refer to definition of GPIO_HOSTSW_OWN. - */ - u32 HostSoftPadOwn : 2; - /* - GPIO Direction - Can choose between In, In with inversion Out, both In and Out, both In with inversion and out or d - isabling both. - Refer to definition of GPIO_DIRECTION for supported settings. - */ - u32 Direction : 5; - /* - Output State - Set Pad output value. - Refer to definition of GPIO_OUTPUT_STATE for supported settings. - This setting takes place when output is enabled. - */ - u32 OutputState : 2; - /* - GPIO Interrupt Configuration - Set Pad to cause one of interrupts (IOxAPIC/SCI/SMI/NMI). This setting is applicable only if GPIO - A is in input mode. - If GPIO is set to cause an SCI then also Gpe is enabled for this pad. - Refer to definition of GPIO_INT_CONFIG for supported settings. - */ - u32 InterruptConfig : 8; - /* - GPIO Power Configuration. - This setting controls Pad Reset Configuration and Power Rail Type. - Refer to definition of GPIO_RESET_CONFIG for supported settings. - */ - u32 PowerConfig : 4; - /* - GPIO Electrical Configuration - This setting controls pads termination and voltage tolerance. - Refer to definition of GPIO_ELECTRICAL_CONFIG for supported settings. - */ - u32 ElectricalConfig : 7; - /* - GPIO Lock Configuration - This setting controls pads lock. - Refer to definition of GPIO_LOCK_CONFIG for supported settings. - */ - u32 LockConfig : 3; - /* - Additional GPIO configuration - Refer to definition of GPIO_OTHER_CONFIG for supported settings. - */ - u32 OtherSettings : 2; - u32 RsvdBits : 27; -} GPIO_CONFIG; - -typedef struct { - GPIO_PAD GpioPad; - GPIO_CONFIG GpioConfig; -} GPIO_INIT_CONFIG; - -typedef enum { - GpioHardwareDefault = 0x0 -} GPIO_HARDWARE_DEFAULT; - -/* GPIO Pad Mode */ -typedef enum { - GpioPadModeGpio = 0x1, - GpioPadModeNative1 = 0x3, - GpioPadModeNative2 = 0x5, - GpioPadModeNative3 = 0x7, - GpioPadModeNative4 = 0x9, -} GPIO_PAD_MODE; - -/* Host Software Pad Ownership modes */ -typedef enum { - GpioHostOwnDefault = 0x0, /* Leave ownership value unmodified */ - GpioHostOwnAcpi = 0x1, /* Set HOST ownership to ACPI */ - GpioHostOwnGpio = 0x3 /* Set HOST ownership to GPIO */ -} GPIO_HOSTSW_OWN; - -/* GPIO Direction */ -typedef enum { - GpioDirDefault = 0x0, /* Leave pad direction setting unmodified */ - GpioDirInOut = (0x1 | (0x1 << 3)), /* Set pad for both output and input */ - GpioDirInInvOut = (0x1 | (0x3 << 3)), /* Set pad for both output and input with inversion */ - GpioDirIn = (0x3 | (0x1 << 3)), /* Set pad for input only */ - GpioDirInInv = (0x3 | (0x3 << 3)), /* Set pad for input with inversion */ - GpioDirOut = 0x5, /* Set pad for output only */ - GpioDirNone = 0x7 /* Disable both output and input */ -} GPIO_DIRECTION; - -/* GPIO Output State */ -typedef enum { - GpioOutDefault = 0x0, - GpioOutLow = 0x1, - GpioOutHigh = 0x3 -} GPIO_OUTPUT_STATE; - -/* - * GPIO interrupt configuration - * This setting is applicable only if GPIO is in input mode. - * GPIO_INT_CONFIG allows to choose which interrupt is generted - * (IOxAPIC/SCI/SMI/NMI) and how it is triggered (edge or level). - * Field from GpioIntNmi to GpioIntApic can be OR'ed with GpioIntLevel to - * GpioIntBothEdgecan to describe an interrupt e.g. GpioIntApic | GpioIntLevel - * If GPIO is set to cause an SCI then also Gpe is enabled for this pad. - * Not all GPIO are capable of generating an SMI or NMI interrupt - */ -typedef enum { - GpioIntDefault = 0x0, /* Leave value of interrupt routing unmodified */ - GpioIntDis = 0x1, /* Disable IOxAPIC/SCI/SMI/NMI interrupt generation */ - GpioIntNmi = 0x3, /* Enable NMI interrupt only */ - GpioIntSmi = 0x5, /* Enable SMI interrupt only */ - GpioIntSci = 0x9, /* Enable SCI interrupt only */ - GpioIntApic = 0x11, /* Enable IOxAPIC interrupt only */ - GpioIntLevel = (0x1 << 5), /* Set interrupt as level triggered */ - GpioIntEdge = (0x3 << 5), /* Set interrupt as edge triggered */ - GpioIntLvlEdgDis = (0x5 << 5), /* Disable interrupt trigger */ - GpioIntBothEdge = (0x7 << 5) /* Set interrupt as both edge triggered */ -} GPIO_INT_CONFIG; - -/* - * GPIO Power Configuration - * GPIO_RESET_CONFIG allows to set GPIO Reset (used to reset the specified - * Pad Register fields). - */ -typedef enum { - GpioResetDefault = 0x0, /* Leave value of pad reset unmodified */ - GpioResetPwrGood = 0x1, /* Powergood reset */ - GpioResetDeep = 0x3, /* Deep GPIO Reset */ - GpioResetNormal = 0x5, /* GPIO Reset */ - GpioResetResume = 0x7 /* Resume Reset */ -} GPIO_RESET_CONFIG; - -/* - * GPIO Electrical Configuration - * Set GPIO termination and Pad Tolerance (applicable only for some pads) - * Field from GpioTermDefault to GpioTermNative can be OR'ed with - * GpioTolerance1v8. - */ -typedef enum { - GpioTermDefault = 0x0, /* Leave termination setting unmodified */ - GpioTermNone = 0x1, /* none */ - GpioTermWpd5K = 0x5, /* 5kOhm weak pull-down */ - GpioTermWpd20K = 0x9, /* 20kOhm weak pull-down */ - GpioTermWpu1K = 0x13, /* 1kOhm weak pull-up */ - GpioTermWpu2K = 0x17, /* 2kOhm weak pull-up */ - GpioTermWpu5K = 0x15, /* 5kOhm weak pull-up */ - GpioTermWpu20K = 0x19, /* 20kOhm weak pull-up */ - GpioTermWpu1K2K = 0x1B, /* 1kOhm & 2kOhm weak pull-up */ - GpioTermNative = 0x1F, /* Native function for pads termination */ - GpioNoTolerance1v8 = (0x1 << 5), /* Disable 1.8V pad tolerance */ - GpioTolerance1v8 = (0x3 << 5) /* Enable 1.8V pad tolerance */ -} GPIO_ELECTRICAL_CONFIG; - -/* - * GPIO LockConfiguration - * Set GPIO configuration lock and output state lock - * GpioLockPadConfig and GpioLockOutputState can be OR'ed - */ -typedef enum { - GpioLockDefault = 0x0, /* Leave lock setting unmodified */ - GpioPadConfigLock = 0x3, /* Lock Pad Configuration */ - GpioOutputStateLock = 0x5 /* Lock GPIO pad output value */ -} GPIO_LOCK_CONFIG; - -/* - * Other GPIO Configuration GPIO_OTHER_CONFIG is used for less often - * settings and for future extensions Supported settings: - * - RX raw override to '1' - allows to override input value to '1' - * This is applicable only if in input mode (both in GPIO and native usage) - * The override takes place at the internal pad state directly from buffer - * and before the RXINV. - */ -typedef enum { - GpioRxRaw1Default = 0x0, /* Use default input override value */ - GpioRxRaw1Dis = 0x1, /* Don't override input */ - GpioRxRaw1En = 0x3 /* Override input to '1' */ -} GPIO_OTHER_CONFIG; - -/* - * LP GPIO pins: Use below for functions from PCH GPIO Lib which - * require GpioPad as argument. Encoding used here - * has all information required by library functions - */ -#define GPIO_LP_GPP_A0 0x02000000 -#define GPIO_LP_GPP_A1 0x02000001 -#define GPIO_LP_GPP_A2 0x02000002 -#define GPIO_LP_GPP_A3 0x02000003 -#define GPIO_LP_GPP_A4 0x02000004 -#define GPIO_LP_GPP_A5 0x02000005 -#define GPIO_LP_GPP_A6 0x02000006 -#define GPIO_LP_GPP_A7 0x02000007 -#define GPIO_LP_GPP_A8 0x02000008 -#define GPIO_LP_GPP_A9 0x02000009 -#define GPIO_LP_GPP_A10 0x0200000A -#define GPIO_LP_GPP_A11 0x0200000B -#define GPIO_LP_GPP_A12 0x0200000C -#define GPIO_LP_GPP_A13 0x0200000D -#define GPIO_LP_GPP_A14 0x0200000E -#define GPIO_LP_GPP_A15 0x0200000F -#define GPIO_LP_GPP_A16 0x02000010 -#define GPIO_LP_GPP_A17 0x02000011 -#define GPIO_LP_GPP_A18 0x02000012 -#define GPIO_LP_GPP_A19 0x02000013 -#define GPIO_LP_GPP_A20 0x02000014 -#define GPIO_LP_GPP_A21 0x02000015 -#define GPIO_LP_GPP_A22 0x02000016 -#define GPIO_LP_GPP_A23 0x02000017 -#define GPIO_LP_GPP_B0 0x02010000 -#define GPIO_LP_GPP_B1 0x02010001 -#define GPIO_LP_GPP_B2 0x02010002 -#define GPIO_LP_GPP_B3 0x02010003 -#define GPIO_LP_GPP_B4 0x02010004 -#define GPIO_LP_GPP_B5 0x02010005 -#define GPIO_LP_GPP_B6 0x02010006 -#define GPIO_LP_GPP_B7 0x02010007 -#define GPIO_LP_GPP_B8 0x02010008 -#define GPIO_LP_GPP_B9 0x02010009 -#define GPIO_LP_GPP_B10 0x0201000A -#define GPIO_LP_GPP_B11 0x0201000B -#define GPIO_LP_GPP_B12 0x0201000C -#define GPIO_LP_GPP_B13 0x0201000D -#define GPIO_LP_GPP_B14 0x0201000E -#define GPIO_LP_GPP_B15 0x0201000F -#define GPIO_LP_GPP_B16 0x02010010 -#define GPIO_LP_GPP_B17 0x02010011 -#define GPIO_LP_GPP_B18 0x02010012 -#define GPIO_LP_GPP_B19 0x02010013 -#define GPIO_LP_GPP_B20 0x02010014 -#define GPIO_LP_GPP_B21 0x02010015 -#define GPIO_LP_GPP_B22 0x02010016 -#define GPIO_LP_GPP_B23 0x02010017 -#define GPIO_LP_GPP_C0 0x02020000 -#define GPIO_LP_GPP_C1 0x02020001 -#define GPIO_LP_GPP_C2 0x02020002 -#define GPIO_LP_GPP_C3 0x02020003 -#define GPIO_LP_GPP_C4 0x02020004 -#define GPIO_LP_GPP_C5 0x02020005 -#define GPIO_LP_GPP_C6 0x02020006 -#define GPIO_LP_GPP_C7 0x02020007 -#define GPIO_LP_GPP_C8 0x02020008 -#define GPIO_LP_GPP_C9 0x02020009 -#define GPIO_LP_GPP_C10 0x0202000A -#define GPIO_LP_GPP_C11 0x0202000B -#define GPIO_LP_GPP_C12 0x0202000C -#define GPIO_LP_GPP_C13 0x0202000D -#define GPIO_LP_GPP_C14 0x0202000E -#define GPIO_LP_GPP_C15 0x0202000F -#define GPIO_LP_GPP_C16 0x02020010 -#define GPIO_LP_GPP_C17 0x02020011 -#define GPIO_LP_GPP_C18 0x02020012 -#define GPIO_LP_GPP_C19 0x02020013 -#define GPIO_LP_GPP_C20 0x02020014 -#define GPIO_LP_GPP_C21 0x02020015 -#define GPIO_LP_GPP_C22 0x02020016 -#define GPIO_LP_GPP_C23 0x02020017 -#define GPIO_LP_GPP_D0 0x02030000 -#define GPIO_LP_GPP_D1 0x02030001 -#define GPIO_LP_GPP_D2 0x02030002 -#define GPIO_LP_GPP_D3 0x02030003 -#define GPIO_LP_GPP_D4 0x02030004 -#define GPIO_LP_GPP_D5 0x02030005 -#define GPIO_LP_GPP_D6 0x02030006 -#define GPIO_LP_GPP_D7 0x02030007 -#define GPIO_LP_GPP_D8 0x02030008 -#define GPIO_LP_GPP_D9 0x02030009 -#define GPIO_LP_GPP_D10 0x0203000A -#define GPIO_LP_GPP_D11 0x0203000B -#define GPIO_LP_GPP_D12 0x0203000C -#define GPIO_LP_GPP_D13 0x0203000D -#define GPIO_LP_GPP_D14 0x0203000E -#define GPIO_LP_GPP_D15 0x0203000F -#define GPIO_LP_GPP_D16 0x02030010 -#define GPIO_LP_GPP_D17 0x02030011 -#define GPIO_LP_GPP_D18 0x02030012 -#define GPIO_LP_GPP_D19 0x02030013 -#define GPIO_LP_GPP_D20 0x02030014 -#define GPIO_LP_GPP_D21 0x02030015 -#define GPIO_LP_GPP_D22 0x02030016 -#define GPIO_LP_GPP_D23 0x02030017 -#define GPIO_LP_GPP_E0 0x02040000 -#define GPIO_LP_GPP_E1 0x02040001 -#define GPIO_LP_GPP_E2 0x02040002 -#define GPIO_LP_GPP_E3 0x02040003 -#define GPIO_LP_GPP_E4 0x02040004 -#define GPIO_LP_GPP_E5 0x02040005 -#define GPIO_LP_GPP_E6 0x02040006 -#define GPIO_LP_GPP_E7 0x02040007 -#define GPIO_LP_GPP_E8 0x02040008 -#define GPIO_LP_GPP_E9 0x02040009 -#define GPIO_LP_GPP_E10 0x0204000A -#define GPIO_LP_GPP_E11 0x0204000B -#define GPIO_LP_GPP_E12 0x0204000C -#define GPIO_LP_GPP_E13 0x0204000D -#define GPIO_LP_GPP_E14 0x0204000E -#define GPIO_LP_GPP_E15 0x0204000F -#define GPIO_LP_GPP_E16 0x02040010 -#define GPIO_LP_GPP_E17 0x02040011 -#define GPIO_LP_GPP_E18 0x02040012 -#define GPIO_LP_GPP_E19 0x02040013 -#define GPIO_LP_GPP_E20 0x02040014 -#define GPIO_LP_GPP_E21 0x02040015 -#define GPIO_LP_GPP_E22 0x02040016 -#define GPIO_LP_GPP_E23 0x02040017 -#define GPIO_LP_GPP_F0 0x02050000 -#define GPIO_LP_GPP_F1 0x02050001 -#define GPIO_LP_GPP_F2 0x02050002 -#define GPIO_LP_GPP_F3 0x02050003 -#define GPIO_LP_GPP_F4 0x02050004 -#define GPIO_LP_GPP_F5 0x02050005 -#define GPIO_LP_GPP_F6 0x02050006 -#define GPIO_LP_GPP_F7 0x02050007 -#define GPIO_LP_GPP_F8 0x02050008 -#define GPIO_LP_GPP_F9 0x02050009 -#define GPIO_LP_GPP_F10 0x0205000A -#define GPIO_LP_GPP_F11 0x0205000B -#define GPIO_LP_GPP_F12 0x0205000C -#define GPIO_LP_GPP_F13 0x0205000D -#define GPIO_LP_GPP_F14 0x0205000E -#define GPIO_LP_GPP_F15 0x0205000F -#define GPIO_LP_GPP_F16 0x02050010 -#define GPIO_LP_GPP_F17 0x02050011 -#define GPIO_LP_GPP_F18 0x02050012 -#define GPIO_LP_GPP_F19 0x02050013 -#define GPIO_LP_GPP_F20 0x02050014 -#define GPIO_LP_GPP_F21 0x02050015 -#define GPIO_LP_GPP_F22 0x02050016 -#define GPIO_LP_GPP_F23 0x02050017 -#define GPIO_LP_GPP_G0 0x02060000 -#define GPIO_LP_GPP_G1 0x02060001 -#define GPIO_LP_GPP_G2 0x02060002 -#define GPIO_LP_GPP_G3 0x02060003 -#define GPIO_LP_GPP_G4 0x02060004 -#define GPIO_LP_GPP_G5 0x02060005 -#define GPIO_LP_GPP_G6 0x02060006 -#define GPIO_LP_GPP_G7 0x02060007 -#define GPIO_LP_GPD0 0x02070000 -#define GPIO_LP_GPD1 0x02070001 -#define GPIO_LP_GPD2 0x02070002 -#define GPIO_LP_GPD3 0x02070003 -#define GPIO_LP_GPD4 0x02070004 -#define GPIO_LP_GPD5 0x02070005 -#define GPIO_LP_GPD6 0x02070006 -#define GPIO_LP_GPD7 0x02070007 -#define GPIO_LP_GPD8 0x02070008 -#define GPIO_LP_GPD9 0x02070009 -#define GPIO_LP_GPD10 0x0207000A -#define GPIO_LP_GPD11 0x0207000B - -#define END_OF_GPIO_TABLE 0xFFFFFFFF -#endif
-
Patrick Georgi