[XS] Change in coreboot[master]: mb/google/hades: Update typeC usb PLD

[Eric Lai (Code Review)]

Eric Lai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/75912?usp=email )

Change subject: mb/google/hades: Update typeC usb PLD
......................................................................

mb/google/hades: Update typeC usb PLD

get_usb_port_references refer the PLD group. If the port assign cross ports
like mux[0] use USB3 and mux[1] use USB1, then we need set USB3 to group 1.

BUG=b:286328285
TEST=check ACPI can have right USB port in EC CON.

Signed-off-by: Eric Lai 
Change-Id: I97517ecd4f8615af749fb6d007ded8e171796f7c
---
M src/mainboard/google/brya/variants/hades/overridetree.cb
1 file changed, 4 insertions(+), 4 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/12/75912/1

diff --git a/src/mainboard/google/brya/variants/hades/overridetree.cb b/src/mainboard/google/brya/variants/hades/overridetree.cb
index 1412a1f..8ecff50 100644
--- a/src/mainboard/google/brya/variants/hades/overridetree.cb
+++ b/src/mainboard/google/brya/variants/hades/overridetree.cb
@@ -289,14 +289,14 @@
    					register "desc" = ""USB3 Type-C Port C1 (MLB)""
    					register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
    					register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
    					device ref tcss_usb3_port1 on end
    				end
    				chip drivers/usb/acpi
    					register "desc" = ""USB3 Type-C Port C0 (MLB)""
    					register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
    					register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))"
    					device ref tcss_usb3_port3 on end
    				end
    			end
@@ -309,14 +309,14 @@
    					register "desc" = ""USB2 Type-C Port C0 (MLB)""
    					register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
    					register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
    					device ref usb2_port1 on end
    				end
    				chip drivers/usb/acpi
    					register "desc" = ""USB2 Type-C Port C1 (MLB)""
    					register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
    					register "use_custom_pld" = "true"
-						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(1, 1))"
    					device ref usb2_port3 on end
    				end
    				chip drivers/usb/acpi