New patch to review for coreboot: 3d0607f [NOTFORMERGE] mainboard/lenovo/x60/i915.c: Increase end from 800 to 1600

[Paul Menzel]

Paul Menzel ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5927

-gerrit

commit 3d0607f5130179763f867c2fdd28db42e88674f4
Author: Paul Menzel 
Date:   Tue Jun 3 22:05:33 2014 +0200

[NOTFORMERGE] mainboard/lenovo/x60/i915.c: Increase end from 800 to 1600

PGETBL_CTL differs between VBIOS (-) and native graphics init (+).

-          PGETBL_CTL: 0x3ffc0001
    +          PGETBL_CTL: 0x3f800001

Also print what is written to PGETBL_CTL.

Change-Id: I0a5b04c2c5300f5056cb48075aa5804984bc9948
    Signed-off-by: Paul Menzel 
---
 src/mainboard/lenovo/x60/i915.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/src/mainboard/lenovo/x60/i915.c b/src/mainboard/lenovo/x60/i915.c
index b41a0ba..8b5f1d9 100644
--- a/src/mainboard/lenovo/x60/i915.c
+++ b/src/mainboard/lenovo/x60/i915.c
@@ -136,18 +136,23 @@ int gtt_setup(unsigned int mmiobase)
    unsigned long PGETBL_save;

PGETBL_save = read32(mmiobase + PGETBL_CTL) & ~PGETBL_ENABLED;
+	printk(BIOS_DEBUG, "%s: GTT PGETLB_CTL register: 0x%lx\n", __func__, PGETBL_save);
    PGETBL_save |= PGETBL_ENABLED;
+	printk(BIOS_DEBUG, "%s: GTT PGETLB_CTL register: 0x%lx\n", __func__, PGETBL_save);

PGETBL_save |= pci_read_config32(dev_find_slot(0, PCI_DEVFN(2,0)), 0x5c) & 0xfffff000;
+	printk(BIOS_DEBUG, "%s: GTT PGETLB_CTL register: 0x%lx\n", __func__, PGETBL_save);
    PGETBL_save |= 2; /* set GTT to 256kb */
+	printk(BIOS_DEBUG, "%s: GTT PGETLB_CTL register: 0x%lx\n", __func__, PGETBL_save);

write32(mmiobase + GFX_FLSH_CNTL, 0);

write32(mmiobase + PGETBL_CTL, PGETBL_save);

/* verify */
-	if (read32(mmiobase + PGETBL_CTL) & PGETBL_ENABLED) {
-		printk(BIOS_DEBUG, "gtt_setup is enabled.\n");
+	PGETBL_save = read32(mmiobase + PGETBL_CTL) & PGETBL_ENABLED;
+	if (PGETBL_save) {
+		printk(BIOS_DEBUG, "gtt_setup is enabled: GTT PGETLB_CTL register: 0x%lx\n", PGETBL_save);
    } else {
    	printk(BIOS_DEBUG, "gtt_setup failed!!!\n");
    	return 1;
@@ -351,7 +356,7 @@ int i915lightup(unsigned int pphysbase, unsigned int piobase,
    	return 0;
    }

-	setgtt(0, 800 , physbase, 4096);
+	setgtt(0, 1600 , physbase, 4096);

temp = READ32(PGETLB_CTL);
    printk(BIOS_INFO, "GTT PGETLB_CTL register: 0x%lx\n", temp);