[S] Change in coreboot[main]: mb/google/nissa/var/nivviks: Update the power resource for NVM and VCM

[V Sowmya (Code Review)]

V Sowmya has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/84420?usp=email )

Change subject: mb/google/nissa/var/nivviks: Update the power resource for NVM and VCM
......................................................................

mb/google/nissa/var/nivviks: Update the power resource for NVM and VCM

The earlier changes pushed to resolve the camera LED blinking issue
led to the regressions with camera autofocus functionality. This
change updates the power resource for NVM and VCM to fix the issue.

BUG=b:365899407
TEST=Build and boot tivviks. Verified the Autofocus and all the
camera sanity tests.

Change-Id: Id3e256d59982ac176844e289f18ee450079704b9
Signed-off-by: Sowmya V 
---
M src/mainboard/google/brya/variants/nivviks/overridetree.cb
1 file changed, 19 insertions(+), 9 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/20/84420/1

diff --git a/src/mainboard/google/brya/variants/nivviks/overridetree.cb b/src/mainboard/google/brya/variants/nivviks/overridetree.cb
index 67c47346..c156d2a 100644
--- a/src/mainboard/google/brya/variants/nivviks/overridetree.cb
+++ b/src/mainboard/google/brya/variants/nivviks/overridetree.cb
@@ -437,14 +437,17 @@

# Controls
    			register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  # EN_PP2800_WCAM_X
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16"  # EN_PP1800_PP1200_WCAM_X

# _ON
-				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops_cnt" = "2"
    			register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"

# _OFF
-				register "off_seq.ops_cnt" = "1"
-				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+				register "off_seq.ops_cnt" = "2"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

device i2c 0C on
    				probe WFC WFC_MIPI_OVTI5675
@@ -456,6 +459,19 @@
    			register "acpi_name" = ""NVM0""
    			register "chip_name" = ""GT24C08""
    			register "device_type" = "INTEL_ACPI_CAMERA_NVM"
+				register "has_power_resource" = "1"
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
+
+				# Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16"  # EN_PP1800_PP1200_WCAM_X
+
+				# _ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+
+				# _OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"

register "nvm_size" = "0x2000"
    			register "nvm_pagesize" = "1"
@@ -509,12 +525,6 @@
    			register "sdmode_delay" = "5"
    			device generic 0 on end
    		end
-			chip drivers/sof
-				register "spkr_tplg" = "max98360a"
-				register "jack_tplg" = "nau8825"
-				register "mic_tplg" = "_2ch_pdm0"
-				device generic 0 on end
-			end
    	end
    	device ref pcie_rp4 on
    		probe WIFI_CATEGORY WIFI_7