[S] Change in coreboot[master]: superio/ite/it8772f/chip.h: Use 'bool' when appropriate

[Felix Held (Code Review)]

Felix Held has submitted this change. ( https://review.coreboot.org/c/coreboot/+/70253 )

Change subject: superio/ite/it8772f/chip.h: Use 'bool' when appropriate
......................................................................

superio/ite/it8772f/chip.h: Use 'bool' when appropriate

Change-Id: I20c3298a920396718f0dc036e57faf8e46b82b2c
Signed-off-by: Elyes Haouas 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70253
Reviewed-by: Felix Held 
Tested-by: build bot (Jenkins) 
---
M src/mainboard/google/beltino/devicetree.cb
M src/mainboard/google/jecht/devicetree.cb
M src/mainboard/samsung/stumpy/devicetree.cb
M src/superio/ite/it8772f/chip.h
4 files changed, 25 insertions(+), 10 deletions(-)

Approvals:
  build bot (Jenkins): Verified
  Felix Held: Looks good to me, approved

diff --git a/src/mainboard/google/beltino/devicetree.cb b/src/mainboard/google/beltino/devicetree.cb
index 18ec581..cdaab35 100644
--- a/src/mainboard/google/beltino/devicetree.cb
+++ b/src/mainboard/google/beltino/devicetree.cb
@@ -79,11 +79,11 @@
    			end
    			chip superio/ite/it8772f
    				# Skip keyboard init
-					register "skip_keyboard" = "1"
+					register "skip_keyboard" = "true"
    				# Enable PECI on TMPIN3
    				register "peci_tmpin" = "3"
    				# Enable FAN2
-					register "fan2_enable" = "1"
+					register "fan2_enable" = "true"

device pnp 2e.0 off end # FDC
    				device pnp 2e.1 on # Serial Port 1
diff --git a/src/mainboard/google/jecht/devicetree.cb b/src/mainboard/google/jecht/devicetree.cb
index 59cf071..1bf8a2a 100644
--- a/src/mainboard/google/jecht/devicetree.cb
+++ b/src/mainboard/google/jecht/devicetree.cb
@@ -73,7 +73,7 @@
    			end
    			chip superio/ite/it8772f
    				# Skip keyboard init
-					register "skip_keyboard" = "1"
+					register "skip_keyboard" = "true"
    				# Enable PECI on TMPIN3
    				register "peci_tmpin" = "3"
    				# Disable use of TMPIN1
@@ -81,7 +81,7 @@
    				# Enable Thermal Diode on TMPIN2
    				register "tmpin2_mode" = "1"
    				# Enable FAN2
-					register "fan2_enable" = "1"
+					register "fan2_enable" = "true"
    				# Default FAN2 speed
    				register "fan2_speed" = "0x4d"

diff --git a/src/mainboard/samsung/stumpy/devicetree.cb b/src/mainboard/samsung/stumpy/devicetree.cb
index 10aeb44..b348f14 100644
--- a/src/mainboard/samsung/stumpy/devicetree.cb
+++ b/src/mainboard/samsung/stumpy/devicetree.cb
@@ -69,11 +69,11 @@
    				# Enable GPIO52 as USBPWRON1#
    				register "gpio_set5" = "0x06"
    				# Skip keyboard init
-					register "skip_keyboard" = "1"
+					register "skip_keyboard" = "true"
    				# Enable PECI on TMPIN3
    				register "peci_tmpin" = "3"
    				# Enable FAN3
-					register "fan3_enable" = "1"
+					register "fan3_enable" = "true"

device pnp 2e.0 off end # FDC
    				device pnp 2e.1 on # Serial Port 1
diff --git a/src/superio/ite/it8772f/chip.h b/src/superio/ite/it8772f/chip.h
index 19f1f7d..eb3ccd2 100644
--- a/src/superio/ite/it8772f/chip.h
+++ b/src/superio/ite/it8772f/chip.h
@@ -4,6 +4,8 @@
 #define SUPERIO_ITE_IT8772F_CHIP_H

#include <device/device.h>
+#include <types.h>
+
 #include "it8772f.h"

struct superio_ite_it8772f_config {
@@ -15,7 +17,7 @@
    u8 gpio_set5;
    u8 gpio_set6;

-	u8 skip_keyboard;
+	bool skip_keyboard;

/*
     * Enable external temperature sensor to use PECI GetTemp()
@@ -32,9 +34,9 @@
    /*
     * Enable a FAN for software control.
     */
-	u8 fan1_enable;
-	u8 fan2_enable;
-	u8 fan3_enable;
+	bool fan1_enable;
+	bool fan2_enable;
+	bool fan3_enable;

/*
     * Default FAN speed