[XS] Change in coreboot[main]: mb/google/brya/var/xol: Change touchpad I2C interrupt type to GPIO_INT

[SH Kim (Code Review)]

Attention is currently required from: Dinesh Gehlot, Edward Doan, Eric Lai, Kapil Porwal, Nick Vaccaro, Subrata Banik, YH Lin.

SH Kim has posted comments on this change by SH Kim. ( https://review.coreboot.org/c/coreboot/+/83346?usp=email )

Change subject: mb/google/brya/var/xol: Change touchpad I2C interrupt type to GPIO_INT
......................................................................

Patch Set 1:

(3 comments)

Patchset:

PS1:
> If gpio config is not correct, touchpad would never work. […]

Acknowledged

File src/mainboard/google/brya/variants/xol/gpio.c:

https://review.coreboot.org/c/coreboot/+/83346/comment/62b8d3f9_19c8f2b0?usp... :
PS1, Line 123: 	PAD_CFG_GPI_INT_LOCK(GPP_F14, NONE, LEVEL, LOCK_CONFIG),
> Actually this was the original config in baseboard/brya/gpio.c […]

Acknowledged

File src/mainboard/google/brya/variants/xol/overridetree.cb:

https://review.coreboot.org/c/coreboot/+/83346/comment/b2cd8c5e_d88812e8?usp... :
PS1, Line 347: 				register "generic.detect" = "1"
> We had the issue with this original config.

Acknowledged