Change in coreboot[master]: mb/google/nissa/var/nivviks: Remove USB2 WWAN

[Eric Lai (Code Review)]

Eric Lai has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/63098 )

Change subject: mb/google/nissa/var/nivviks: Remove USB2 WWAN
......................................................................

mb/google/nissa/var/nivviks: Remove USB2 WWAN

FM101-GL is USB3 WWAN. Thus, remove the USB2 WWAN node.

BUG=b:223490884
TEST=FM101-GL work as expected.
localhost ~ # lsusb
Bus 004 Device 002: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module
localhost ~ # lsusb -t
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 10000M
    |__ Port 2: Dev 2, If 0, Class=Communications, Driver=cdc_mbim, 5000M
    |__ Port 2: Dev 2, If 1, Class=CDC Data, Driver=cdc_mbim, 5000M
    |__ Port 2: Dev 2, If 2, Class=Vendor Specific Class, Driver=option, 5000M
    |__ Port 2: Dev 2, If 3, Class=Vendor Specific Class, Driver=option, 5000M
    |__ Port 2: Dev 2, If 4, Class=Vendor Specific Class, Driver=option, 5000M
    |__ Port 2: Dev 2, If 5, Class=Vendor Specific Class, Driver=option, 5000M

Signed-off-by: Eric Lai 
Change-Id: I9d37ef7104afd2d4c218fb1f4e1d493ccdbffdb2
---
M src/mainboard/google/brya/variants/nivviks/overridetree.cb
1 file changed, 5 insertions(+), 12 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/63098/1

diff --git a/src/mainboard/google/brya/variants/nivviks/overridetree.cb b/src/mainboard/google/brya/variants/nivviks/overridetree.cb
index c870b37..9249896 100644
--- a/src/mainboard/google/brya/variants/nivviks/overridetree.cb
+++ b/src/mainboard/google/brya/variants/nivviks/overridetree.cb
@@ -302,18 +302,6 @@
    					end
    				end
    				chip drivers/usb/acpi
-						register "desc" = ""USB2 WWAN""
-						register "type" = "UPC_TYPE_INTERNAL"
-						register "has_power_resource" = "1"
-						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F12)"
-						register "reset_off_delay_ms" = "20"
-						register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
-						register "enable_delay_ms" = "20"
-						device ref usb2_port4 on
-							probe DB_USB DB_1C_LTE
-						end
-					end
-					chip drivers/usb/acpi
    					register "desc" = ""USB2 Camera""
    					register "type" = "UPC_TYPE_INTERNAL"
    					device ref usb2_port6 on end
@@ -342,6 +330,11 @@
    				chip drivers/usb/acpi
    					register "desc" = ""USB3 WWAN""
    					register "type" = "UPC_TYPE_INTERNAL"
+						register "has_power_resource" = "1"
+						register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F12)"
+						register "reset_off_delay_ms" = "20"
+						register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D6)"
+						register "enable_delay_ms" = "20"
    					device ref usb3_port2 on
    						probe DB_USB DB_1C_LTE
    					end