Idwer Vollering has submitted this change and it was merged. ( https://review.coreboot.org/21322 )
Change subject: util/board_status: do a spell check ......................................................................
util/board_status: do a spell check
Change-Id: Ie39be471851586076343b8e9454a9140d4664b8d Signed-off-by: Idwer Vollering vidwer@gmail.com Reviewed-on: https://review.coreboot.org/21322 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Jonathan Neuschäfer j.neuschaefer@gmx.net Reviewed-by: Sumeet R Pawnikar sumeet.r.pawnikar@intel.com --- M util/board_status/README 1 file changed, 6 insertions(+), 6 deletions(-)
Approvals: build bot (Jenkins): Verified Jonathan Neuschäfer: Looks good to me, but someone else must approve Sumeet R Pawnikar: Looks good to me, approved
diff --git a/util/board_status/README b/util/board_status/README index 2337826..c462e7d 100644 --- a/util/board_status/README +++ b/util/board_status/README @@ -9,13 +9,13 @@ time, to do that go in "Console --->" in make menuconfig, then set "Default console log level" to SPEW
-Rereference: ------------- +Reference: +---------- [1] in make menuconfig you should have: [*] Use CMOS for configuration values This option is also known as CONFIG_USE_OPTION_TABLE in Kconfig. -Information trough SSH +Information through SSH ====================== -board_status.sh can gather information trough ssh with the -r +board_status.sh can gather information through ssh with the -r option.
When using "-r <host>", The script will attempt to log into @@ -28,10 +28,10 @@ board_status.sh expects the remote host to have the following programs in its path: cbmem, dmesg
-Boot log gathering trough a serial port +Boot log gathering through a serial port ======================================= When using -s </dev/xxx>, board_status.sh starts by retrieving the -boot log trough the serial port. +boot log through the serial port.
To produce such logs, power off the board, run board_status.sh with the right arguments, power on the board.