[M] Change in coreboot[master]: soc/intel/cannonlake/chip.h: Use boolean type where applicable
Felix Singer has submitted this change. ( https://review.coreboot.org/c/coreboot/+/75959?usp=email )
Change subject: soc/intel/cannonlake/chip.h: Use boolean type where applicable ......................................................................
soc/intel/cannonlake/chip.h: Use boolean type where applicable
Change-Id: If9639bd1d0737f94931c28b0e12f214a5c1f87c0 Signed-off-by: lilacious yuchenhe126@gmail.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/75959 Reviewed-by: Jonathon Hall jonathon.hall@puri.sm Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Felix Singer service+coreboot-gerrit@felixsinger.de --- M src/soc/intel/cannonlake/chip.h 1 file changed, 64 insertions(+), 63 deletions(-)
Approvals: Jonathon Hall: Looks good to me, but someone else must approve build bot (Jenkins): Verified Felix Singer: Looks good to me, approved
diff --git a/src/soc/intel/cannonlake/chip.h b/src/soc/intel/cannonlake/chip.h index e8d46d4..3093050 100644 --- a/src/soc/intel/cannonlake/chip.h +++ b/src/soc/intel/cannonlake/chip.h @@ -10,6 +10,7 @@ #include <intelblocks/gspi.h> #include <intelblocks/lpc_lib.h> #include <intelblocks/power_limit.h> +#include <stdbool.h> #include <stdint.h> #include <soc/pch.h> #include <soc/pci_devs.h> @@ -57,12 +58,12 @@ /* S0ix configuration */
/* Enable S0iX support */ - int s0ix_enable; + bool s0ix_enable; /* Enable Audio DSP oscillator qualification for S0ix */ - uint8_t cppmvric2_adsposcdis; + bool cppmvric2_adsposcdis;
/* Enable DPTF support */ - int dptf_enable; + bool dptf_enable;
enum { MAX_PC_DEFAULT = 0, @@ -78,10 +79,10 @@ } max_package_c_state;
/* Deep SX enable for both AC and DC */ - int deep_s3_enable_ac; - int deep_s3_enable_dc; - int deep_s5_enable_ac; - int deep_s5_enable_dc; + bool deep_s3_enable_ac; + bool deep_s3_enable_dc; + bool deep_s5_enable_ac; + bool deep_s5_enable_dc;
/* Deep Sx Configuration * DSX_EN_WAKE_PIN - Enable WAKE# pin @@ -107,7 +108,7 @@ } SaGv;
/* Rank Margin Tool. 1:Enable, 0:Disable */ - uint8_t RMT; + bool RMT;
/* USB related */ struct usb2_port_config usb2_ports[16]; @@ -117,7 +118,7 @@ /* Wake Enable Bitmap for USB3 ports */ uint16_t usb3_wake_enable_bitmap; /* USB2 PHY power gating */ - uint8_t PchUsb2PhySusPgDisable; + bool PchUsb2PhySusPgDisable;
/* SATA related */ enum { @@ -133,39 +134,39 @@ SataDevSlpDswReset = 7 } SataDevSlpRstConfig;
- uint8_t SataSalpSupport; - uint8_t SataPortsEnable[8]; - uint8_t SataPortsDevSlp[8]; + bool SataSalpSupport; + bool SataPortsEnable[8]; + bool SataPortsDevSlp[8]; uint8_t SataPortsDevSlpResetConfig[8]; - uint8_t SataPortsHotPlug[8]; + bool SataPortsHotPlug[8];
/* Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable */ - uint8_t SlpS0WithGbeSupport; + bool SlpS0WithGbeSupport; /* SLP_S0 Voltage Margining Policy. 0: disable, 1: enable */ - uint8_t PchPmSlpS0VmRuntimeControl; + bool PchPmSlpS0VmRuntimeControl; /* SLP_S0 Voltage Margining 0.70V Policy. 0: disable, 1: enable */ - uint8_t PchPmSlpS0Vm070VSupport; + bool PchPmSlpS0Vm070VSupport; /* SLP_S0 Voltage Margining 0.75V Policy. 0: disable, 1: enable */ - uint8_t PchPmSlpS0Vm075VSupport; + bool PchPmSlpS0Vm075VSupport;
/* Audio related */ - uint8_t PchHdaDspEnable; + bool PchHdaDspEnable;
/* Enable/Disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1 */ - uint8_t PchHdaAudioLinkHda; - uint8_t PchHdaIDispCodecDisconnect; - uint8_t PchHdaAudioLinkDmic0; - uint8_t PchHdaAudioLinkDmic1; - uint8_t PchHdaAudioLinkSsp0; - uint8_t PchHdaAudioLinkSsp1; - uint8_t PchHdaAudioLinkSsp2; - uint8_t PchHdaAudioLinkSndw1; - uint8_t PchHdaAudioLinkSndw2; - uint8_t PchHdaAudioLinkSndw3; - uint8_t PchHdaAudioLinkSndw4; + bool PchHdaAudioLinkHda; + bool PchHdaIDispCodecDisconnect; + bool PchHdaAudioLinkDmic0; + bool PchHdaAudioLinkDmic1; + bool PchHdaAudioLinkSsp0; + bool PchHdaAudioLinkSsp1; + bool PchHdaAudioLinkSsp2; + bool PchHdaAudioLinkSndw1; + bool PchHdaAudioLinkSndw2; + bool PchHdaAudioLinkSndw3; + bool PchHdaAudioLinkSndw4;
/* PCIe Root Ports */ - uint8_t PcieRpEnable[CONFIG_MAX_ROOT_PORTS]; + bool PcieRpEnable[CONFIG_MAX_ROOT_PORTS]; /* PCIe output clocks type to PCIe devices. * 0-23: PCH rootport, 0x70: LAN, 0x80: unspecified but in use, * 0xFF: not used */ @@ -174,18 +175,18 @@ * clksrc. */ uint8_t PcieClkSrcClkReq[CONFIG_MAX_PCIE_CLOCK_SRC]; /* PCIe LTR(Latency Tolerance Reporting) mechanism */ - uint8_t PcieRpLtrEnable[CONFIG_MAX_ROOT_PORTS]; + bool PcieRpLtrEnable[CONFIG_MAX_ROOT_PORTS]; /* Implemented as slot or built-in? */ - uint8_t PcieRpSlotImplemented[CONFIG_MAX_ROOT_PORTS]; + bool PcieRpSlotImplemented[CONFIG_MAX_ROOT_PORTS]; /* Enable/Disable HotPlug support for Root Port */ - uint8_t PcieRpHotPlug[CONFIG_MAX_ROOT_PORTS]; + bool PcieRpHotPlug[CONFIG_MAX_ROOT_PORTS];
/* * Enable/Disable AER (Advanced Error Reporting) for Root Port * 0: Disable AER * 1: Enable AER */ - uint8_t PcieRpAdvancedErrorReporting[CONFIG_MAX_ROOT_PORTS]; + bool PcieRpAdvancedErrorReporting[CONFIG_MAX_ROOT_PORTS];
/* PCIE RP ASPM, ASPM support for the root port */ enum { @@ -204,23 +205,23 @@ } PcieRpMaxPayload[CONFIG_MAX_ROOT_PORTS];
/* eMMC and SD */ - uint8_t ScsEmmcHs400Enabled; + bool ScsEmmcHs400Enabled; /* Need to update DLL setting to get Emmc running at HS400 speed */ - uint8_t EmmcHs400DllNeed; + bool EmmcHs400DllNeed; /* 0-39: number of active delay for RX strobe, unit is 125 psec */ uint8_t EmmcHs400RxStrobeDll1; /* 0-78: number of active delay for TX data, unit is 125 psec */ uint8_t EmmcHs400TxDataDll; /* Enable/disable SD card write protect pin configuration on CML */ - uint8_t ScsSdCardWpPinEnabled; + bool ScsSdCardWpPinEnabled;
/* Heci related */ - uint8_t DisableHeciRetry; + bool DisableHeciRetry;
/* Gfx related */ - uint8_t SkipExtGfxScan; + bool SkipExtGfxScan;
- uint8_t Device4Enable; + bool Device4Enable;
/* CPU PL2/4 Config * Performance: Maximum PLs for maximum performance. @@ -234,13 +235,13 @@ struct vr_config domain_vr_config[NUM_VR_DOMAINS];
/* Enables support for Teton Glacier hybrid storage device */ - uint8_t TetonGlacierMode; + bool TetonGlacierMode;
/* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ - uint8_t eist_enable; + bool eist_enable;
/* Enable C6 DRAM */ - uint8_t enable_c6dram; + bool enable_c6dram;
/* * SLP_S3 Minimum Assertion Width Policy @@ -346,14 +347,14 @@ unsigned int sdcard_cd_gpio;
/* Enable Pch iSCLK */ - uint8_t pch_isclk; + bool pch_isclk;
/* * Acoustic Noise Mitigation * 0b - Disable * 1b - Enable noise mitigation */ - uint8_t AcousticNoiseMitigation; + bool AcousticNoiseMitigation;
/* * Disable Fast Package C-state ramping @@ -361,10 +362,10 @@ * 0b - Enabled * 1b - Disabled */ - uint8_t FastPkgCRampDisableIa; - uint8_t FastPkgCRampDisableGt; - uint8_t FastPkgCRampDisableSa; - uint8_t FastPkgCRampDisableFivr; + bool FastPkgCRampDisableIa; + bool FastPkgCRampDisableGt; + bool FastPkgCRampDisableSa; + bool FastPkgCRampDisableFivr;
/* * Adjust the VR slew rates @@ -380,32 +381,32 @@ uint8_t SlowSlewRateForFivr;
/* SATA Power Optimizer */ - uint8_t satapwroptimize; + bool satapwroptimize;
/* SATA Gen3 Strength */ struct sata_port_config sata_port[SOC_INTEL_CML_SATA_DEV_MAX];
/* Enable or disable eDP device */ - uint8_t DdiPortEdp; + bool DdiPortEdp;
/* Enable or disable HPD of DDI port B/C/D/F */ - uint8_t DdiPortBHpd; - uint8_t DdiPortCHpd; - uint8_t DdiPortDHpd; - uint8_t DdiPortFHpd; + bool DdiPortBHpd; + bool DdiPortCHpd; + bool DdiPortDHpd; + bool DdiPortFHpd;
/* Enable or disable DDC of DDI port B/C/D/F */ - uint8_t DdiPortBDdc; - uint8_t DdiPortCDdc; - uint8_t DdiPortDDdc; - uint8_t DdiPortFDdc; + bool DdiPortBDdc; + bool DdiPortCDdc; + bool DdiPortDDdc; + bool DdiPortFDdc;
/* Unlock all GPIO Pads */ - uint8_t PchUnlockGpioPads; + bool PchUnlockGpioPads;
/* Enable GBE wakeup */ - uint8_t LanWakeFromDeepSx; - uint8_t WolEnableOverride; + bool LanWakeFromDeepSx; + bool WolEnableOverride;
#if !CONFIG(SOC_INTEL_COMETLAKE) uint32_t VrPowerDeliveryDesign; @@ -416,7 +417,7 @@ * 0: Use FSP default GPIO PM program, * 1: coreboot to override GPIO PM program */ - uint8_t gpio_override_pm; + bool gpio_override_pm; /* * GPIO PM configuration: 0 to disable, 1 to enable power gating * Bit 6-7: Reserved
-
Felix Singer (Code Review)