Patch set updated for coreboot: 8b7bf79 mainboard/tyan/s2882/irq_tables.c: Remove dead code under #if 0
Edward O'Callaghan (eocallaghan@alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/8202
-gerrit
commit 8b7bf79f9382501974f9952006956e3139637d26 Author: Edward O'Callaghan eocallaghan@alterapraxis.com Date: Tue Jan 13 05:47:41 2015 +1100
mainboard/tyan/s2882/irq_tables.c: Remove dead code under #if 0
Silence unused variable warning.
Change-Id: I2671e0843a60e5bd857b233a45ea68715461f187 Signed-off-by: Edward O'Callaghan eocallaghan@alterapraxis.com --- src/mainboard/tyan/s2882/irq_tables.c | 54 ----------------------------------- 1 file changed, 54 deletions(-)
diff --git a/src/mainboard/tyan/s2882/irq_tables.c b/src/mainboard/tyan/s2882/irq_tables.c index 218ddce..e78ebf1 100644 --- a/src/mainboard/tyan/s2882/irq_tables.c +++ b/src/mainboard/tyan/s2882/irq_tables.c @@ -10,38 +10,6 @@ #include <stdint.h> #include <arch/pirq_routing.h>
-static const struct irq_routing_table intel_irq_routing_table = { - PIRQ_SIGNATURE, /* u32 signature */ - PIRQ_VERSION, /* u16 version */ - 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */ - 1, /* Where the interrupt router lies (bus) */ - (4<<3)|3, /* Where the interrupt router lies (dev) */ - 0, /* IRQs devoted exclusively to PCI usage */ - 0x1022, /* Vendor */ - 0x746b, /* Device */ - 0, /* Miniport data */ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ - 0xff, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structu -re (including checksum) */ - { - {1,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0}, - {0x4,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0}, - {0x4,(6<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x3,(3<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0}, - {0x3,(1<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0}, - {0x2,(3<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x3, 0}, - {0x2,(2<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x4, 0}, - {0x4,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0}, - {0x4,(5<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x4,(8<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,(6<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x2,(5<<3)|0, {{0x3, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}}, 0, 0}, - {0x2,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0}, - {0x3,(4<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0}, - {0x3,(5<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0}, - } -}; - static unsigned node_link_to_bus(unsigned node, unsigned link) { device_t dev; @@ -63,11 +31,6 @@ static unsigned node_link_to_bus(unsigned node, unsigned link) dst_node = (config_map >> 4) & 7; dst_link = (config_map >> 8) & 3; bus_base = (config_map >> 16) & 0xff; -#if 0 - printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n", - dst_node, dst_link, bus_base, - reg, config_map); -#endif if ((dst_node == node) && (dst_link == link)) { return bus_base; @@ -262,28 +225,12 @@ unsigned long write_pirq_routing_table(unsigned long addr) pci_assign_irqs(bus_8131_1, 6, slotIrqs_8131_1_6); write_pirq_info(pirq_info, bus_8131_1,(6<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; -#if 0 - //?? - write_pirq_info(pirq_info, bus_8131_1,(5<<3)|0, 0x3, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0); - pirq_info++; slot_num++; -#endif
printk(BIOS_DEBUG, "setting Onboard Broadcom NIC\n"); static const unsigned char slotIrqs_8131_1_9[4] = { 5, 9, 0, 0 }; pci_assign_irqs(bus_8131_1, 9, slotIrqs_8131_1_9); write_pirq_info(pirq_info, bus_8131_1,(9<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0, 0, 0, 0, 0, 0); pirq_info++; slot_num++; -#if 0 - //?? what's this? - write_pirq_info(pirq_info, bus_8131_2,(4<<3)|0, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x6, 0); - pirq_info++; slot_num++; -#endif - -#if 0 - //?? what's this? - write_pirq_info(pirq_info, bus_8131_2,(5<<3)|0, 0x3, 0xdef8, 0x4, 0xdef8, 0x1, 0xdef8, 0x2, 0xdef8, 0x7, 0); - pirq_info++; slot_num++; -#endif
pirq->size = 32 + 16 * slot_num;
@@ -299,5 +246,4 @@ unsigned long write_pirq_routing_table(unsigned long addr) printk(BIOS_INFO, "done.\n");
return (unsigned long) pirq_info; - }
-
Edward O'Callaghan