Attention is currently required from: Tarun Tuli.
SH Kim has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/76882?usp=email )
Change subject: mb/google/nissa/var/pirrha: Add GPIO table ......................................................................
mb/google/nissa/var/pirrha: Add GPIO table
Add GPIO table for Pirrha.
BUG=b:292134655 TEST=FW_NAME=pirrha emerge-nissa coreboot
Change-Id: I1f45365665b200fa97766344df2f9e06bc6dfb3d Signed-off-by: Seunghwan Kim sh_.kim@samsung.corp-partner.google.com --- A src/mainboard/google/brya/variants/pirrha/gpio.c 1 file changed, 119 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/82/76882/1
diff --git a/src/mainboard/google/brya/variants/pirrha/gpio.c b/src/mainboard/google/brya/variants/pirrha/gpio.c new file mode 100644 index 0000000..5ec78d8 --- /dev/null +++ b/src/mainboard/google/brya/variants/pirrha/gpio.c @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> +#include <soc/gpio.h> + +/* Pad configuration in ramstage */ +static const struct pad_config override_gpio_table[] = { + /* A14 : USB_C0_AUX_DC_P */ + PAD_CFG_NF(GPP_A14, NONE, DEEP, NF6), + /* A15 : USB_C0_AUX_DC_N */ + PAD_CFG_NF(GPP_A15, NONE, DEEP, NF6), + + /* B11 : PMCALERT# ==> EN_PP3300_WLAN */ + PAD_CFG_GPO(GPP_B11, 1, DEEP), + + /* D6 : WWAN_EN ==> NC */ + PAD_NC(GPP_D6, NONE), + /* D7 : WLAN_CLKREQ_ODL ==> NC */ + PAD_NC(GPP_D7, NONE), + /* D8 : SD_CLKREQ_ODL ==> NC */ + PAD_NC(GPP_D8, NONE), + + /* E14 : EDP_HPD ==> NC */ + PAD_NC(GPP_E14, NONE), + /* E20 : HDMI_DDC_SCL ==> NC */ + PAD_NC(GPP_E20, NONE), + /* E21 : DDP2_CTRLDATA ==> HDMI_DDC_SDA_STRAP */ + PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1), + /* E22 : DDPA_CTRLCLK ==> LCD_RST_N - used for MIPI Power seq. */ + PAD_CFG_NF(GPP_E22, NONE, DEEP, NF1), + /* E23 : NC */ + PAD_NC(GPP_E23, NONE), + + /* F6 : NC */ + PAD_NC(GPP_F6, NONE), + /* F12 : GSXDOUT ==> EMR_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_F12, NONE, PLTRST, LEVEL, INVERT), + /* F13 : SOC_PEN_DETECT_R_ODL ==> NC */ + PAD_NC(GPP_F13, NONE), + /* F15 : SOC_PEN_DETECT_OEL ==> NC */ + PAD_NC(GPP_F15, NONE), + /* F16 : GSXCLK ==> EMR_RESET_L */ + PAD_CFG_GPO(GPP_F16, 0, DEEP), + + /* H3 : NC */ + PAD_NC(GPP_H3, NONE), + /* H8 : I2C4_SDA ==> SOC_I2C_EMR_SDA */ + PAD_CFG_NF(GPP_H8, NONE, DEEP, NF1), + /* H9 : I2C4_SCL ==> SOC_I2C_EMR_SCL */ + PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), + /* H12 : SD_PERST_L ==> NC */ + PAD_NC(GPP_H12, NONE), + /* H19 : NC */ + PAD_NC(GPP_H19, NONE), + /* H20 : NC */ + PAD_NC(GPP_H20, NONE), + + /* Configure the virtual CNVi Bluetooth I2S GPIO pads */ + /* BT_I2S_BCLK */ + PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3), + /* BT_I2S_SYNC */ + PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3), + /* BT_I2S_SDO */ + PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3), + /* BT_I2S_SDI */ + PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3), + /* SSP2_SCLK */ + PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1), + /* SSP2_SFRM */ + PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1), + /* SSP_TXD */ + PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1), + /* SSP_RXD */ + PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1), +}; + +/* Early pad configuration in bootblock for nivviks */ +static const struct pad_config early_gpio_table[] = { + /* A13 : GPP_A13 ==> GSC_SOC_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* E12 : THC0_SPI1_IO1 ==> SOC_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E12, NONE, DEEP), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F18, NONE, DEEP), + /* H4 : I2C0_SDA ==> SOC_I2C_GSC_SDA */ + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + /* H5 : I2C0_SCL ==> SOC_I2C_GSC_SCL */ + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + /* H10 : UART0_RXD ==> UART_SOC_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_SOC_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* H13 : UART0_CTS# ==> EN_PP3300_SD_X */ + PAD_CFG_GPO(GPP_H13, 1, DEEP), +}; + +static const struct pad_config romstage_gpio_table[] = { +}; + +const struct pad_config *variant_gpio_override_table(size_t *num) +{ + *num = ARRAY_SIZE(override_gpio_table); + return override_gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + + +const struct pad_config *variant_romstage_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(romstage_gpio_table); + return romstage_gpio_table; +}