Evelyn Huang has uploaded this change for review. ( https://review.coreboot.org/20098
Change subject: src/cpu/amd/pi Fix checkpatch warnings and errors ......................................................................
src/cpu/amd/pi Fix checkpatch warnings and errors
Fix remaining space prohibited between function name and open parenthesis, line over 80 characteres, unnecessary braces for single statement blocks, space required before open brace errors and warnings in subdirectories of src/cpu/amd/pi
Change-Id: I177ffe98a3674bd700a39eb8073db34adf9499b4 Signed-off-by: Evelyn Huang evhuang@google.com --- M src/cpu/amd/pi/00660F01/fixme.c M src/cpu/amd/pi/00660F01/model_15_init.c M src/cpu/amd/pi/00670F00/fixme.c M src/cpu/amd/pi/00730F01/fixme.c M src/cpu/amd/pi/00730F01/model_16_init.c 5 files changed, 69 insertions(+), 59 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/98/20098/1
diff --git a/src/cpu/amd/pi/00660F01/fixme.c b/src/cpu/amd/pi/00660F01/fixme.c index 20353a0..276f064 100644 --- a/src/cpu/amd/pi/00660F01/fixme.c +++ b/src/cpu/amd/pi/00660F01/fixme.c @@ -25,7 +25,7 @@ AMD_CONFIG_PARAMS StdHeader;
/* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xF4); PciData = 1; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
@@ -33,29 +33,32 @@ * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are * set to non-posted regions. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ - PciData |= 1 << 7; /* set NP (non-posted) bit */ + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x84); + /* last address before processor local APIC at FEE00000 */ + PciData = 0x00FEDF00; + /* set NP (non-posted) bit */ + PciData |= 1 << 7; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x80); + /* lowest NP address is HPET at FED00000 */ + PciData = (0xFED00000 >> 8) | 3; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8C); PciData = 0x00FECF00; /* last address before non-posted range */ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + LibAmdMsrRead(0xC001001A, &MsrReg, &StdHeader); MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x88); PciData = (UINT32)MsrReg; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC4); PciData = 0x0000F000; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC0); PciData = 0x00000003; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); } @@ -68,24 +71,26 @@ AMD_CONFIG_PARAMS StdHeader;
/* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + * Set the MMIO Configuration Base Address and + * Bus Range onto MMIO configuration base + * Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | + (LibAmdBitScanReverse(CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + LibAmdMsrWrite(0xC0010058, &MsrReg, &StdHeader);
/* For serial port */ PciData = 0xFF03FFD5; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x14, 0x3, 0x44); LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Set ROM cache onto WP to decrease post time */ MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; - LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); + LibAmdMsrWrite(0x20C, &MsrReg, &StdHeader); MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; - LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); + LibAmdMsrWrite(0x20D, &MsrReg, &StdHeader);
- if (IS_ENABLED(CONFIG_UDELAY_LAPIC)){ + if (IS_ENABLED(CONFIG_UDELAY_LAPIC)) { LibAmdMsrRead(0x1B, &MsrReg, &StdHeader); MsrReg |= 1 << 11; LibAmdMsrWrite(0x1B, &MsrReg, &StdHeader); diff --git a/src/cpu/amd/pi/00660F01/model_15_init.c b/src/cpu/amd/pi/00660F01/model_15_init.c index c31dec8..bce276d 100644 --- a/src/cpu/amd/pi/00660F01/model_15_init.c +++ b/src/cpu/amd/pi/00660F01/model_15_init.c @@ -40,11 +40,11 @@ u32 Bar3Addr; u64 Tmp64; /* Get Bar3 Addr */ - Bar3Addr = PspLibPciReadPspConfig (0x20); + Bar3Addr = PspLibPciReadPspConfig(0x20); Tmp64 = Bar3Addr; printk(BIOS_DEBUG, "Bar3=%llx\n", Tmp64); - LibAmdMsrWrite (0xC00110A2, &Tmp64, NULL); - LibAmdMsrRead (0xC00110A2, &Tmp64, NULL); + LibAmdMsrWrite(0xC00110A2, &Tmp64, NULL); + LibAmdMsrRead(0xC00110A2, &Tmp64, NULL); }
static void model_15_init(device_t dev) @@ -58,7 +58,7 @@ u32 siblings; #endif
- disable_cache (); + disable_cache(); /* Enable access to AMD RdDram and WrDram extension bits */ msr = rdmsr(SYSCFG_MSR); msr.lo |= SYSCFG_MSR_MtrrFixDramModEn; @@ -67,12 +67,12 @@
// BSP: make a0000-bffff UC, c0000-fffff WB msr.lo = msr.hi = 0; - wrmsr (0x259, msr); + wrmsr(0x259, msr); msr.lo = msr.hi = 0x1e1e1e1e; wrmsr(0x250, msr); wrmsr(0x258, msr); for (msrno = 0x268; msrno <= 0x26f; msrno++) - wrmsr (msrno, msr); + wrmsr(msrno, msr);
msr = rdmsr(SYSCFG_MSR); msr.lo &= ~SYSCFG_MSR_MtrrFixDramModEn; @@ -85,9 +85,8 @@ /* zero the machine check error status registers */ msr.lo = 0; msr.hi = 0; - for (i = 0; i < 6; i++) { + for (i = 0; i < 6; i++) wrmsr(MCI_STATUS + (i * 4), msr); - }
/* Enable the local CPU APICs */ diff --git a/src/cpu/amd/pi/00670F00/fixme.c b/src/cpu/amd/pi/00670F00/fixme.c index e7d7ba5..2571c69 100644 --- a/src/cpu/amd/pi/00670F00/fixme.c +++ b/src/cpu/amd/pi/00670F00/fixme.c @@ -47,7 +47,7 @@ PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8C); PciData = 0x00FECF00; /* last address before non-posted range */ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + LibAmdMsrRead(0xC001001A, &MsrReg, &StdHeader); MsrReg = (MsrReg >> 8) | 3; PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x88); PciData = (UINT32)MsrReg; @@ -73,8 +73,8 @@ Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base Address MSR register. */ - MsrReg = CONFIG_MMCONF_BASE_ADDRESS | \ - (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | + (LibAmdBitScanReverse(CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; LibAmdMsrWrite(0xC0010058, &MsrReg, &StdHeader);
/* For serial port */ @@ -85,11 +85,11 @@ /* Set ROM cache onto WP to decrease post time */ MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; LibAmdMsrWrite(0x20C, &MsrReg, &StdHeader); - MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | \ + MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; LibAmdMsrWrite(0x20D, &MsrReg, &StdHeader);
- if (IS_ENABLED(CONFIG_UDELAY_LAPIC)){ + if (IS_ENABLED(CONFIG_UDELAY_LAPIC)) { LibAmdMsrRead(0x1B, &MsrReg, &StdHeader); MsrReg |= 1 << 11; LibAmdMsrWrite(0x1B, &MsrReg, &StdHeader); diff --git a/src/cpu/amd/pi/00730F01/fixme.c b/src/cpu/amd/pi/00730F01/fixme.c index 674e5c1..696641c 100644 --- a/src/cpu/amd/pi/00730F01/fixme.c +++ b/src/cpu/amd/pi/00730F01/fixme.c @@ -25,7 +25,7 @@ AMD_CONFIG_PARAMS StdHeader;
/* Enable legacy video routing: D18F1xF4 VGA Enable */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xF4); PciData = 1; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
@@ -33,29 +33,32 @@ * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are * set to non-posted regions. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84); - PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */ - PciData |= 1 << 7; /* set NP (non-posted) bit */ + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x84); + /* last address before processor local APIC at FEE00000 */ + PciData = 0x00FEDF00; + /* set NP (non-posted) bit */ + PciData |= 1 << 7; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80); - PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */ + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x80); + /* lowest NP address is HPET at FED00000 */ + PciData = (0xFED00000 >> 8) | 3; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Map the remaining PCI hole as posted MMIO */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x8C); PciData = 0x00FECF00; /* last address before non-posted range */ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader); + LibAmdMsrRead(0xC001001A, &MsrReg, &StdHeader); MsrReg = (MsrReg >> 8) | 3; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0x88); PciData = (UINT32)MsrReg; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* Send all IO (0000-FFFF) to southbridge. */ - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC4); PciData = 0x0000F000; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x18, 1, 0xC0); PciData = 0x00000003; LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader); } @@ -68,15 +71,17 @@ AMD_CONFIG_PARAMS StdHeader;
/* - Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base - Address MSR register. - */ - MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; - LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader); + * Set the MMIO Configuration Base Address and + * Bus Range onto MMIO configuration base + * Address MSR register. + */ + MsrReg = CONFIG_MMCONF_BASE_ADDRESS | + (LibAmdBitScanReverse(CONFIG_MMCONF_BUS_NUMBER) << 2) | 1; + LibAmdMsrWrite(0xC0010058, &MsrReg, &StdHeader);
/* For serial port */ PciData = 0xFF03FFD5; - PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44); + PciAddress.AddressValue = MAKE_SBDFO(0, 0, 0x14, 0x3, 0x44); LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
/* PSP */ @@ -86,11 +91,11 @@
/* Set ROM cache onto WP to decrease post time */ MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull; - LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader); + LibAmdMsrWrite(0x20C, &MsrReg, &StdHeader); MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull; - LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader); + LibAmdMsrWrite(0x20D, &MsrReg, &StdHeader);
- if (IS_ENABLED(CONFIG_UDELAY_LAPIC)){ + if (IS_ENABLED(CONFIG_UDELAY_LAPIC)) { LibAmdMsrRead(0x1B, &MsrReg, &StdHeader); MsrReg |= 1 << 11; LibAmdMsrWrite(0x1B, &MsrReg, &StdHeader); diff --git a/src/cpu/amd/pi/00730F01/model_16_init.c b/src/cpu/amd/pi/00730F01/model_16_init.c index 294814f..e14746f 100644 --- a/src/cpu/amd/pi/00730F01/model_16_init.c +++ b/src/cpu/amd/pi/00730F01/model_16_init.c @@ -41,21 +41,23 @@ u32 siblings; #endif
- disable_cache (); + disable_cache(); /* Enable access to AMD RdDram and WrDram extension bits */ msr = rdmsr(SYSCFG_MSR); msr.lo |= SYSCFG_MSR_MtrrFixDramModEn; msr.lo &= ~SYSCFG_MSR_MtrrFixDramEn; wrmsr(SYSCFG_MSR, msr);
- // BSP: make a0000-bffff UC, c0000-fffff WB, same as OntarioApMtrrSettingsList for APs + /* BSP: make a0000-bffff UC, c0000-fffff WB, + * same as OntarioApMtrrSettingsList for APs + */ msr.lo = msr.hi = 0; - wrmsr (0x259, msr); + wrmsr(0x259, msr); msr.lo = msr.hi = 0x1e1e1e1e; wrmsr(0x250, msr); wrmsr(0x258, msr); for (msrno = 0x268; msrno <= 0x26f; msrno++) - wrmsr (msrno, msr); + wrmsr(msrno, msr);
msr = rdmsr(SYSCFG_MSR); msr.lo &= ~SYSCFG_MSR_MtrrFixDramModEn; @@ -68,9 +70,8 @@ /* zero the machine check error status registers */ msr.lo = 0; msr.hi = 0; - for (i = 0; i < 6; i++) { + for (i = 0; i < 6; i++) wrmsr(MCI_STATUS + (i * 4), msr); - }
/* Enable the local CPU APICs */
-
Evelyn Huang (Code Review)