[S] Change in coreboot[master]: mb/clevo/l140cu: PECI idle workaround

[Michael Niewöhner (Code Review)]

Attention is currently required from: Felix Singer.

Hello Felix Singer,

I'd like you to reexamine a change. Please visit

https://review.coreboot.org/c/coreboot/+/68793

to look at the new patch set (#2).

Change subject: mb/clevo/l140cu: PECI idle workaround
......................................................................

mb/clevo/l140cu: PECI idle workaround

According to Intel doc# 575683 the PECI bus should be low when idle and
is pulled up by clients with strong drive. However, for unknown reasons
the bus stays high on this board, blocking s0ix entry.

The PECI reference schematic in the ASPEED AST2400 BMC datasheet
(actually not related to this board) says that a pull-down is *required*
for the idle state.

This might be just a requirement of this BMC, since this is nowhere
documented in Intel datasheets, schematics or elsewhere. However,
configuring a weak pull-down (20 k) on the PECI pad indeed solves this
problem for now.

Change-Id: Ib5a6b0ad3553c2cf795037d6a1982102bcb04644
Signed-off-by: Michael Niewöhner 
---
M src/mainboard/clevo/cml-u/variants/l140cu/gpio.c
1 file changed, 26 insertions(+), 0 deletions(-)

git pull ssh://review.coreboot.org:29418/coreboot refs/changes/93/68793/2