[XS] Change in coreboot[main]: mb/google/nissa/var/joxer: Use `DB_USB` to probe conn1 device

[Subrata Banik (Code Review)]

Subrata Banik has submitted this change. ( https://review.coreboot.org/c/coreboot/+/84255?usp=email )

Change subject: mb/google/nissa/var/joxer: Use `DB_USB` to probe conn1 device
......................................................................

mb/google/nissa/var/joxer: Use `DB_USB` to probe conn1 device

Joxer experienced error messages during developer mode entry due to
failed USB-C1 probing.

This patch adds the `DB_USB DB_1C` probe directive to the `conn1`
device in the overridetree, ensuring USB-C1 is only probed when
`FW_CONFIG` supports the applicable hardware SKU.

This should resolve the error flood seen during dev mode entry on
Joxer.

BUG=b:364240631
TEST=Able to build and boot google/joxer to OS without any error.

w/o this patch:

send_packet: CrosEC result code 9
send_packet: CrosEC result code 3
Failed to get PD_MUX_INFO port1 ret:-3
update_all_tcss_ports_states: port C1: get_usb_pd_mux_info failed
send_packet: CrosEC result code 9
send_packet: CrosEC result code 3
Failed to get PD_MUX_INFO port1 ret:-3

w/ this patch:

No error reported during dev mode entry

Change-Id: I8cdefa01409d5a8a75032f30dacde40057e064dd
Signed-off-by: Subrata Banik 
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84255
Tested-by: build bot (Jenkins) 
Reviewed-by: Dinesh Gehlot 
Reviewed-by: Eric Lai 
---
M src/mainboard/google/brya/variants/joxer/overridetree.cb
1 file changed, 3 insertions(+), 1 deletion(-)

Approvals:
  Dinesh Gehlot: Looks good to me, approved
  build bot (Jenkins): Verified
  Eric Lai: Looks good to me, approved

diff --git a/src/mainboard/google/brya/variants/joxer/overridetree.cb b/src/mainboard/google/brya/variants/joxer/overridetree.cb
index 7b43f86..e039366 100644
--- a/src/mainboard/google/brya/variants/joxer/overridetree.cb
+++ b/src/mainboard/google/brya/variants/joxer/overridetree.cb
@@ -360,7 +360,9 @@
    				chip drivers/intel/pmc_mux/conn
    					use usb2_port2 as usb2_port
    					use tcss_usb3_port2 as usb3_port
-						device generic 1 alias conn1 on end
+						device generic 1 alias conn1 on
+							probe DB_USB DB_1C
+						end
    				end
    			end
    		end