Martin Roth has submitted this change. ( https://review.coreboot.org/c/coreboot/+/68544 )
Change subject: soc/amd/mendocino: Add code for printing STB to boot log ......................................................................
soc/amd/mendocino: Add code for printing STB to boot log
This adds the mendocino specific code for printing the STB data to the boot log. It still needs to be enabled in the mainboard to be used.
Signed-off-by: Martin Roth gaumless@gmail.com Change-Id: I249507a97ed6c44805e9e66a6ea23f200d62cf66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68544 Tested-by: build bot (Jenkins) no-reply@coreboot.org Reviewed-by: Fred Reitberger reitbergerfred@gmail.com --- M src/soc/amd/mendocino/Kconfig M src/soc/amd/mendocino/early_fch.c A src/soc/amd/mendocino/include/soc/stb.h M src/soc/amd/mendocino/romstage.c 4 files changed, 34 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Fred Reitberger: Looks good to me, approved
diff --git a/src/soc/amd/mendocino/Kconfig b/src/soc/amd/mendocino/Kconfig index 9caee1e..c03dbe2 100644 --- a/src/soc/amd/mendocino/Kconfig +++ b/src/soc/amd/mendocino/Kconfig @@ -84,6 +84,7 @@ select SOC_AMD_COMMON_BLOCK_SMM # TODO: Check if this is still correct select SOC_AMD_COMMON_BLOCK_SMU select SOC_AMD_COMMON_BLOCK_SPI # TODO: Check if this is still correct + select SOC_AMD_COMMON_BLOCK_STB select SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H # TODO: Check if this is still correct select SOC_AMD_COMMON_BLOCK_UART select SOC_AMD_COMMON_BLOCK_UCODE diff --git a/src/soc/amd/mendocino/early_fch.c b/src/soc/amd/mendocino/early_fch.c index fb359b3..a9aec09 100644 --- a/src/soc/amd/mendocino/early_fch.c +++ b/src/soc/amd/mendocino/early_fch.c @@ -9,6 +9,7 @@ #include <amdblocks/lpc.h> #include <amdblocks/pmlib.h> #include <amdblocks/smbus.h> +#include <amdblocks/stb.h> #include <amdblocks/uart.h> #include <soc/i2c.h> #include <soc/southbridge.h> @@ -54,6 +55,9 @@ /* After console init */ void fch_early_init(void) { + if (CONFIG(WRITE_STB_BUFFER_TO_CONSOLE)) + write_stb_to_console(); + reset_i2c_peripherals(); pm_set_power_failure_state(); fch_print_pmxc0_status(); diff --git a/src/soc/amd/mendocino/include/soc/stb.h b/src/soc/amd/mendocino/include/soc/stb.h new file mode 100644 index 0000000..cba1d0a --- /dev/null +++ b/src/soc/amd/mendocino/include/soc/stb.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef AMD_MENDOCINO_STB_H +#define AMD_MENDOCINO_STB_H + +#define STB_CFG_SMN_ADDR 0x3E00000 +#define AMD_STB_SDRAM_FIFO_SIZE 2048 + +#endif /* AMD_MENDOCINO_STB_H */ diff --git a/src/soc/amd/mendocino/romstage.c b/src/soc/amd/mendocino/romstage.c index 9f2be8e..dfec897 100644 --- a/src/soc/amd/mendocino/romstage.c +++ b/src/soc/amd/mendocino/romstage.c @@ -6,6 +6,7 @@ #include <amdblocks/acpimmio.h> #include <amdblocks/memmap.h> #include <amdblocks/pmlib.h> +#include <amdblocks/stb.h> #include <arch/cpu.h> #include <console/console.h> #include <fsp/api.h> @@ -16,6 +17,9 @@ { post_code(0x40);
+ if (CONFIG(WRITE_STB_BUFFER_TO_CONSOLE)) + write_stb_to_console(); + /* Snapshot chipset state prior to any FSP call */ fill_chipset_state();