Nico Huber has submitted this change. ( https://review.coreboot.org/c/coreboot/+/29480 )
Change subject: mb/kontron/bsl6: Add new Skylake COMe module ......................................................................
mb/kontron/bsl6: Add new Skylake COMe module
Add Kontron/bSL6 together with Siemens/Boxer26, a baseboard for the bSL6.
The plain bSL6 variant received little testing and only during early development. The Boxer26 variant is actively used and fully tested. The latest rebase was boot tested with FILO and Linux 4.19.
Change-Id: If2b6a3f1e9dd095463f1f1521068b9f66a9189c5 Signed-off-by: Nico Huber nico.huber@secunet.com Signed-off-by: Felix Singer felix.singer@secunet.com Reviewed-on: https://review.coreboot.org/c/coreboot/+/29480 Reviewed-by: Angel Pons th3fanbus@gmail.com Tested-by: build bot (Jenkins) no-reply@coreboot.org --- A src/mainboard/kontron/bsl6/Kconfig A src/mainboard/kontron/bsl6/Kconfig.name A src/mainboard/kontron/bsl6/Makefile.inc A src/mainboard/kontron/bsl6/acpi/ec.asl A src/mainboard/kontron/bsl6/acpi/superio.asl A src/mainboard/kontron/bsl6/board_info.txt A src/mainboard/kontron/bsl6/bootblock.c A src/mainboard/kontron/bsl6/cmos.default A src/mainboard/kontron/bsl6/cmos.layout A src/mainboard/kontron/bsl6/devicetree.cb A src/mainboard/kontron/bsl6/dsdt.asl A src/mainboard/kontron/bsl6/gpio.h A src/mainboard/kontron/bsl6/ramstage.c A src/mainboard/kontron/bsl6/romstage.c A src/mainboard/kontron/bsl6/variant.h A src/mainboard/kontron/bsl6/variants/boxer26/gma-mainboard.ads A src/mainboard/kontron/bsl6/variants/boxer26/overridetree.cb A src/mainboard/kontron/bsl6/variants/boxer26/romstage.c A src/mainboard/kontron/bsl6/variants/bsl6/gma-mainboard.ads A src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb A src/mainboard/kontron/bsl6/variants/bsl6/romstage.c 21 files changed, 794 insertions(+), 0 deletions(-)
Approvals: build bot (Jenkins): Verified Angel Pons: Looks good to me, approved
diff --git a/src/mainboard/kontron/bsl6/Kconfig b/src/mainboard/kontron/bsl6/Kconfig new file mode 100644 index 0000000..2da8f44 --- /dev/null +++ b/src/mainboard/kontron/bsl6/Kconfig @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only + +if BOARD_KONTRON_BSL6 || BOARD_SIEMENS_BOXER26 + +config BOARD_SPECIFIC_OPTIONS + def_bool y + select BOARD_ROMSIZE_KB_16384 + select SOC_INTEL_SKYLAKE + select SKYLAKE_SOC_PCH_H + select EXCLUDE_NATIVE_SD_INTERFACE + select NO_FADT_8042 + select HAVE_ACPI_RESUME if BOARD_KONTRON_BSL6 + select HAVE_ACPI_TABLES + select HAVE_OPTION_TABLE + select HAVE_CMOS_DEFAULT + select MAINBOARD_HAS_LPC_TPM + select EC_KONTRON_KEMPLD + select MAINBOARD_HAS_LIBGFXINIT + select DRIVERS_I2C_NCT7802Y + select DRIVERS_I2C_LM96000 if BOARD_SIEMENS_BOXER26 + select SECUNET_DMI if BOARD_SIEMENS_BOXER26 + +config MAINBOARD_DIR + string + default "kontron/bsl6" + +config MAINBOARD_VENDOR + string + default "Siemens" if BOARD_SIEMENS_BOXER26 + +config MAINBOARD_PART_NUMBER + string + default "bSL6" if BOARD_KONTRON_BSL6 + default "Boxer26" if BOARD_SIEMENS_BOXER26 + +config VARIANT_DIR + string + default "bsl6" if BOARD_KONTRON_BSL6 + default "boxer26" if BOARD_SIEMENS_BOXER26 + +config OVERRIDE_DEVICETREE + string + default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" + +config CBFS_SIZE + hex + default 0x600000 if BOARD_SIEMENS_BOXER26 + +config MAX_CPUS + int + default 8 + +config DIMM_MAX + int + default 2 + +config DIMM_SPD_SIZE + int + default 512 + +endif diff --git a/src/mainboard/kontron/bsl6/Kconfig.name b/src/mainboard/kontron/bsl6/Kconfig.name new file mode 100644 index 0000000..0f0577e --- /dev/null +++ b/src/mainboard/kontron/bsl6/Kconfig.name @@ -0,0 +1,5 @@ +config BOARD_KONTRON_BSL6 + bool "COMe-bSL6" + +config BOARD_SIEMENS_BOXER26 + bool "COMe-bSL6 on Siemens/Boxer26" diff --git a/src/mainboard/kontron/bsl6/Makefile.inc b/src/mainboard/kontron/bsl6/Makefile.inc new file mode 100644 index 0000000..1e12ee4 --- /dev/null +++ b/src/mainboard/kontron/bsl6/Makefile.inc @@ -0,0 +1,9 @@ +## SPDX-License-Identifier: GPL-2.0-only + +bootblock-y += bootblock.c + +romstage-y += variants/$(VARIANT_DIR)/romstage.c + +ramstage-y += ramstage.c + +ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += variants/$(VARIANT_DIR)/gma-mainboard.ads diff --git a/src/mainboard/kontron/bsl6/acpi/ec.asl b/src/mainboard/kontron/bsl6/acpi/ec.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/kontron/bsl6/acpi/ec.asl diff --git a/src/mainboard/kontron/bsl6/acpi/superio.asl b/src/mainboard/kontron/bsl6/acpi/superio.asl new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/mainboard/kontron/bsl6/acpi/superio.asl diff --git a/src/mainboard/kontron/bsl6/board_info.txt b/src/mainboard/kontron/bsl6/board_info.txt new file mode 100644 index 0000000..b1c4635 --- /dev/null +++ b/src/mainboard/kontron/bsl6/board_info.txt @@ -0,0 +1,6 @@ +Vendor name: Kontron +Board name: COMe-bSL6 +Category: misc +ROM protocol: SPI +ROM socketed: n +Flashrom support: y diff --git a/src/mainboard/kontron/bsl6/bootblock.c b/src/mainboard/kontron/bsl6/bootblock.c new file mode 100644 index 0000000..7dacd4a --- /dev/null +++ b/src/mainboard/kontron/bsl6/bootblock.c @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootblock_common.h> +#include <ec/kontron/kempld/kempld.h> + +void bootblock_mainboard_early_init(void) +{ + kempld_enable_uart_for_console(); +} diff --git a/src/mainboard/kontron/bsl6/cmos.default b/src/mainboard/kontron/bsl6/cmos.default new file mode 100644 index 0000000..2b66561 --- /dev/null +++ b/src/mainboard/kontron/bsl6/cmos.default @@ -0,0 +1,10 @@ +debug_level=Debug + +hyper_threading=Enable + +power_on_after_fail=Enable + +boot_devices=(hd0,0);(hd1,0) +boot_default=0xff + +cmos_defaults_loaded=No diff --git a/src/mainboard/kontron/bsl6/cmos.layout b/src/mainboard/kontron/bsl6/cmos.layout new file mode 100644 index 0000000..e4bd05c --- /dev/null +++ b/src/mainboard/kontron/bsl6/cmos.layout @@ -0,0 +1,58 @@ +## SPDX-License-Identifier: GPL-2.0-only + +# ----------------------------------------------------------------- +entries + +0 120 r 0 reserved_memory + +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 4 boot_option +388 4 h 0 reboot_counter + +# coreboot config options: console +395 4 e 3 debug_level + +# coreboot config options: cpu +400 1 e 2 hyper_threading + +# coreboot config options: pch +408 2 e 4 power_on_after_fail + +# coreboot config options: mainboard +440 1 e 2 ethernet1 +441 1 e 2 ethernet2 +442 1 e 2 ethernet3 + +# payload config options +512 256 s 0 boot_devices +768 8 h 0 boot_default +776 1 e 1 cmos_defaults_loaded + +# coreboot config options: check sums +984 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations + +#ID value text +1 0 No +1 1 Yes +2 0 Disable +2 1 Enable +3 1 Emergency +3 2 Alert +3 3 Critical +3 4 Error +3 5 Warning +3 6 Notice +3 7 Info +3 8 Debug +3 9 Spew +4 0 Disable +4 1 Enable +4 2 Keep +# ----------------------------------------------------------------- +checksums + +checksum 392 983 984 diff --git a/src/mainboard/kontron/bsl6/devicetree.cb b/src/mainboard/kontron/bsl6/devicetree.cb new file mode 100644 index 0000000..357f8fa --- /dev/null +++ b/src/mainboard/kontron/bsl6/devicetree.cb @@ -0,0 +1,150 @@ +# SPDX-License-Identifier: GPL-2.0-only + +chip soc/intel/skylake + + register "speed_shift_enable" = "1" + + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" + + register "PmConfigSlpS3MinAssert" = "SLP_S3_MIN_ASSERT_50MS" + register "PmConfigSlpS4MinAssert" = "SLP_S4_MIN_ASSERT_4S" + register "PmConfigSlpSusMinAssert" = "SLP_SUS_MIN_ASSERT_4S" + register "PmConfigSlpAMinAssert" = "SLP_A_MIN_ASSERT_2S" + register "PmConfigPciClockRun" = "1" + register "PmConfigPwrCycDur" = "RESET_POWER_CYCLE_4S" + + # VR Settings Configuration for 2 Domains + #+----------------+-------+-------+ + #| Domain/Setting | VCC | VCCGT | + #+----------------+-------+-------+ + #| Psi1Threshold | 20A | 20A | + #| Psi2Threshold | 5A | 5A | + #| Psi3Threshold | 1A | 1A | + #| Psi3Enable | 1 | 1 | + #| Psi4Enable | 1 | 1 | + #| ImonSlope | 0 | 0 | + #| ImonOffset | 0 | 0 | + #| IccMax | 55A | 35A | + #| VrVoltageLimit | 1.52V | 1.52V | + #| AcLoadline | 2.1 | 3.1 | + #| DcLoadline | 2.1 | 3.1 | + #+----------------+-------+-------+ + register "domain_vr_config[VR_IA_CORE]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(55), + .voltage_limit = 1520, + .ac_loadline = 210, + .dc_loadline = 210, + }" + + register "domain_vr_config[VR_GT_UNSLICED]" = "{ + .vr_config_enable = 1, + .psi1threshold = VR_CFG_AMP(20), + .psi2threshold = VR_CFG_AMP(5), + .psi3threshold = VR_CFG_AMP(1), + .psi3enable = 1, + .psi4enable = 1, + .imon_slope = 0x0, + .imon_offset = 0x0, + .icc_max = VR_CFG_AMP(35), + .voltage_limit = 1520, + .ac_loadline = 310, + .dc_loadline = 310, + }" + + # Vendor set Psys Pmax to 30W + register "power_limits_config" = "{ + .psys_pmax = 30, + }" + + # TODO + # Send an extra VR mailbox command for the PS4 exit issue + register "SendVrMbxCmd" = "2" + + device cpu_cluster 0 on + device lapic 0 on end + end + + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 08.0 on end # Gaussian Mixture Model + device pci 14.0 on # USB xHCI + register "usb2_ports[0]" = "USB2_PORT_LONG(OC0)" + register "usb2_ports[1]" = "USB2_PORT_LONG(OC0)" + register "usb2_ports[2]" = "USB2_PORT_LONG(OC1)" + register "usb2_ports[3]" = "USB2_PORT_LONG(OC1)" + register "usb2_ports[4]" = "USB2_PORT_LONG(OC2)" # Debug + end + device pci 14.1 off end # USB xDCI (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 off end # I2C #0 + device pci 15.1 off end # I2C #1 + device pci 15.2 off end # I2C #2 + device pci 15.3 off end # I2C #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT Redirection + device pci 16.4 off end # Management Engine Interface 3 + device pci 17.0 on # SATA + register "SataMode" = "KBLFSP_SATA_MODE_AHCI" + register "SataSalpSupport" = "1" + register "SataPortsEnable[0]" = "1" + register "SataPortsEnable[1]" = "1" + register "SataPortsEnable[2]" = "1" + # SataPortsDevSlp not supported + end + device pci 19.0 off end # UART #2 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on # PCI Express Port 9 (COMe 0) + register "PcieRpEnable[8]" = "1" + end + device pci 1d.1 on # PCI Express Port 10 (COMe 1) + register "PcieRpEnable[9]" = "1" + end + device pci 1d.2 on # PCI Express Port 11 (COMe 2) + register "PcieRpEnable[10]" = "1" + end + device pci 1e.0 off end # UART #0 + device pci 1e.1 off end # UART #1 + device pci 1e.2 off end # GSPI #0 + device pci 1e.3 off end # GSPI #1 + device pci 1f.0 on # LPC Interface + register "serirq_mode" = "SERIRQ_CONTINUOUS" + + # EC/kempld at 0xa80/0xa81 + register "gen1_dec" = "0x00000a81" + + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + chip ec/kontron/kempld + register "uart[0]" = "{ KEMPLD_UART_3F8, 4 }" + device generic 0.0 on end # UART #0 + end + end + device pci 1f.1 on end # P2SB + device pci 1f.2 on end # Power Management Controller + device pci 1f.3 off end # Intel HDA + device pci 1f.4 on # SMBus + chip drivers/i2c/nct7802y + device i2c 0x2e on end + end + end + device pci 1f.5 on end # PCH SPI + device pci 1f.6 on end # GbE + end +end diff --git a/src/mainboard/kontron/bsl6/dsdt.asl b/src/mainboard/kontron/bsl6/dsdt.asl new file mode 100644 index 0000000..a133a9d --- /dev/null +++ b/src/mainboard/kontron/bsl6/dsdt.asl @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <acpi/acpi.h> +DefinitionBlock( + "dsdt.aml", + "DSDT", + 0x02, + OEM_ID, + ACPI_TABLE_CREATOR, + 0x20110725 +) +{ + #include <cpu/intel/common/acpi/cpu.asl> + #include <soc/intel/skylake/acpi/platform.asl> + #include <soc/intel/skylake/acpi/globalnvs.asl> + + Device (_SB.PCI0) { + #include <soc/intel/skylake/acpi/systemagent.asl> + #include <soc/intel/skylake/acpi/pch.asl> + } + + #include <southbridge/intel/common/acpi/sleepstates.asl> +} diff --git a/src/mainboard/kontron/bsl6/gpio.h b/src/mainboard/kontron/bsl6/gpio.h new file mode 100644 index 0000000..a76c967 --- /dev/null +++ b/src/mainboard/kontron/bsl6/gpio.h @@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include <soc/gpe.h> +#include <soc/gpio.h> + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { + PAD_CFG_NF(GPP_A0, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_A1, 20K_PU, PLTRST, NF1), + PAD_CFG_NF(GPP_A2, 20K_PU, PLTRST, NF1), + PAD_CFG_NF(GPP_A3, 20K_PU, PLTRST, NF1), + PAD_CFG_NF(GPP_A4, 20K_PU, PLTRST, NF1), + PAD_CFG_NF(GPP_A5, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_A6, NONE, PLTRST, NF1), + PAD_CFG_GPI_INT(GPP_A7, NONE, PLTRST, OFF), + PAD_CFG_NF(GPP_A8, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_A9, 20K_PD, PLTRST, NF1), + PAD_CFG_NF(GPP_A10, 20K_PD, PLTRST, NF1), + PAD_CFG_GPI_INT(GPP_A11, NONE, PLTRST, OFF), + PAD_CFG_GPO(GPP_A12, 1, PLTRST), + PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_A15, 20K_PU, DEEP, NF1), + PAD_CFG_GPI_INT(GPP_A16, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_A17, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_A18, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_A19, NONE, PLTRST, OFF), + PAD_CFG_GPO(GPP_A20, 1, DEEP), + PAD_CFG_GPO(GPP_A21, 1, DEEP), + PAD_CFG_GPO(GPP_A22, 1, DEEP), + PAD_CFG_GPI_INT(GPP_A23, NONE, PLTRST, OFF), + + PAD_CFG_GPI_INT(GPP_B0, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_B1, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_B2, NONE, PLTRST, OFF), + PAD_CFG_GPO(GPP_B3, 1, DEEP), + PAD_CFG_NF(GPP_B4, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), + PAD_CFG_GPO(GPP_B6, 1, DEEP), + PAD_CFG_GPO(GPP_B7, 1, DEEP), + PAD_CFG_GPO(GPP_B8, 1, DEEP), + PAD_CFG_GPO(GPP_B9, 1, DEEP), + PAD_CFG_GPO(GPP_B10, 1, DEEP), + PAD_CFG_GPI_INT(GPP_B11, NONE, PLTRST, OFF), + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B14, 20K_PD, PLTRST, NF1), + PAD_CFG_GPI_INT(GPP_B15, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_B16, NONE, PLTRST, OFF), + PAD_CFG_GPO(GPP_B17, 1, DEEP), + PAD_CFG_GPI_INT(GPP_B18, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_B19, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_B20, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_B21, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_B22, NONE, PLTRST, OFF), + PAD_CFG_TERM_GPO(GPP_B23, 1, 20K_PU, DEEP), + + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + PAD_CFG_GPI_ACPI_SCI(GPP_C2, NONE, DEEP, YES), + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + PAD_CFG_GPI_INT(GPP_C5, NONE, PLTRST, OFF), + /* XXX: C6 not readable */ + /* XXX: C7 not readable */ + PAD_CFG_NF(GPP_C8, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C9, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C10, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C11, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C12, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C13, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C14, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C15, NONE, PLTRST, NF1), + PAD_CFG_GPI_INT(GPP_C16, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_C17, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_C18, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_C19, NONE, PLTRST, OFF), + PAD_CFG_NF(GPP_C20, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C21, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C22, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_C23, NONE, PLTRST, NF1), + + PAD_CFG_GPO(GPP_D0, 1, DEEP), + PAD_CFG_GPI_INT(GPP_D1, NONE, DEEP, OFF), + PAD_CFG_GPI_INT(GPP_D2, NONE, DEEP, OFF), + PAD_CFG_GPO(GPP_D3, 1, DEEP), + PAD_CFG_GPI_INT(GPP_D4, NONE, PLTRST, OFF), + PAD_CFG_NF(GPP_D5, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_D6, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_D7, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_D8, NONE, PLTRST, NF1), + PAD_CFG_GPO(GPP_D9, 0, DEEP), + PAD_CFG_GPO(GPP_D10, 0, DEEP), + PAD_CFG_GPI_SCI_HIGH(GPP_D11, NONE, DEEP, LEVEL), + PAD_CFG_GPI_SCI_HIGH(GPP_D12, NONE, DEEP, LEVEL), + PAD_CFG_GPI_INT(GPP_D13, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_D14, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_D15, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_D16, NONE, PLTRST, OFF), + PAD_CFG_GPO(GPP_D17, 0, DEEP), + PAD_CFG_GPI_INT(GPP_D18, NONE, DEEP, OFF), + PAD_CFG_GPO(GPP_D19, 0, DEEP), + PAD_CFG_GPO(GPP_D20, 0, DEEP), + PAD_CFG_GPO(GPP_D21, 1, DEEP), + PAD_CFG_GPO(GPP_D22, 0, DEEP), + PAD_CFG_GPI_INT(GPP_D23, NONE, PLTRST, OFF), + + PAD_CFG_NF(GPP_E0, 20K_PU, PLTRST, NF1), + PAD_CFG_NF(GPP_E1, 20K_PU, PLTRST, NF1), + PAD_CFG_GPI_INT(GPP_E2, NONE, PLTRST, OFF), + PAD_CFG_GPI_SCI_HIGH(GPP_E3, NONE, DEEP, LEVEL), + PAD_CFG_NF(GPP_E4, NONE, PWROK, NF1), + PAD_CFG_GPI_INT(GPP_E5, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_E6, NONE, PLTRST, OFF), + PAD_CFG_GPI_ACPI_SCI(GPP_E7, NONE, DEEP, YES), + PAD_CFG_NF(GPP_E8, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_E12, NONE, DEEP, NF1), + + PAD_CFG_GPI_INT(GPP_F0, NONE, PLTRST, OFF), + PAD_CFG_NF(GPP_F1, 20K_PU, PLTRST, NF1), + PAD_CFG_NF(GPP_F2, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_F3, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_F4, NONE, PLTRST, NF1), + PAD_CFG_GPI_ACPI_SCI(GPP_F5, NONE, DEEP, NONE), + PAD_CFG_NF(GPP_F6, NONE, PWROK, NF1), + PAD_CFG_GPI_INT(GPP_F7, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_F8, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_F9, NONE, PLTRST, OFF), + PAD_CFG_GPI_APIC(GPP_F10, NONE, PLTRST), + PAD_CFG_GPI_INT(GPP_F11, NONE, PLTRST, OFF), + PAD_CFG_GPI_APIC_INVERT(GPP_F12, NONE, PLTRST), + PAD_CFG_GPI_APIC(GPP_F13, NONE, PLTRST), + PAD_CFG_GPI_APIC_INVERT(GPP_F14, NONE, DEEP), + PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1), + PAD_CFG_GPO(GPP_F18, 1, PLTRST), + PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), + PAD_CFG_GPO(GPP_F22, 1, PLTRST), + PAD_CFG_GPO(GPP_F23, 1, DEEP), + + PAD_CFG_GPO(GPP_G0, 1, PLTRST), + PAD_CFG_GPO(GPP_G1, 1, PLTRST), + PAD_CFG_GPI_SCI_LOW(GPP_G2, NONE, PLTRST, LEVEL), + PAD_CFG_GPI_SCI_LOW(GPP_G3, NONE, PLTRST, LEVEL), + PAD_CFG_GPO(GPP_G4, 1, DEEP), + PAD_CFG_GPI_APIC(GPP_G5, NONE, PLTRST), + PAD_CFG_GPI_ACPI_SCI(GPP_G6, NONE, PLTRST, YES), + PAD_CFG_GPO(GPP_G7, 1, DEEP), + PAD_CFG_GPI_INT(GPP_G8, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_G9, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_G10, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_G11, NONE, PLTRST, OFF), + PAD_CFG_GPI_ACPI_SCI(GPP_G12, 20K_PD, PLTRST, YES), + PAD_CFG_GPO(GPP_G13, 1, PLTRST), + PAD_CFG_GPI_ACPI_SCI(GPP_G14, NONE, PLTRST, YES), + PAD_CFG_GPO(GPP_G15, 0, PLTRST), + PAD_CFG_TERM_GPO(GPP_G16, 1, 20K_PD, PLTRST), + PAD_CFG_GPI_INT(GPP_G17, NONE, PLTRST, OFF), + PAD_CFG_GPI_APIC(GPP_G18, NONE, PLTRST), + PAD_CFG_NF(GPP_G19, NONE, PLTRST, NF1), + PAD_CFG_GPI_APIC(GPP_G20, NONE, PLTRST), + PAD_CFG_GPI_ACPI_SCI(GPP_G21, NONE, DEEP, YES), + PAD_CFG_GPO(GPP_G22, 1, PLTRST), + PAD_CFG_GPO(GPP_G23, 1, PLTRST), + + PAD_CFG_GPO(GPP_H0, 1, DEEP), + PAD_CFG_GPO(GPP_H1, 1, DEEP), + PAD_CFG_GPO(GPP_H2, 1, DEEP), + PAD_CFG_GPO(GPP_H3, 1, DEEP), + PAD_CFG_GPO(GPP_H4, 1, DEEP), + PAD_CFG_GPO(GPP_H5, 1, DEEP), + PAD_CFG_GPO(GPP_H6, 1, DEEP), + PAD_CFG_GPO(GPP_H7, 1, DEEP), + PAD_CFG_GPO(GPP_H8, 1, DEEP), + PAD_CFG_GPO(GPP_H9, 1, DEEP), + PAD_CFG_GPI_INT(GPP_H10, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_H11, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_H12, NONE, PLTRST, OFF), + PAD_CFG_GPI_APIC(GPP_H13, NONE, PLTRST), + PAD_CFG_GPI_APIC(GPP_H14, NONE, PLTRST), + PAD_CFG_GPI_APIC(GPP_H15, NONE, PLTRST), + PAD_CFG_GPI_INT(GPP_H16, NONE, PLTRST, OFF), + PAD_CFG_GPO(GPP_H17, 1, PLTRST), + PAD_CFG_GPI_INT(GPP_H18, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_H19, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_H20, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_H21, NONE, PLTRST, OFF), + PAD_CFG_GPI_INT(GPP_H22, NONE, PLTRST, OFF), + PAD_CFG_GPO(GPP_H23, 0, DEEP), + + PAD_CFG_GPI_INT(GPD0, NONE, PLTRST, OFF), + PAD_CFG_GPO(GPD1, 0, PWROK), + PAD_CFG_NF(GPD2, NONE, PWROK, NF1), + PAD_CFG_NF(GPD3, 20K_PU, PWROK, NF1), + PAD_CFG_NF(GPD4, NONE, PWROK, NF1), + PAD_CFG_NF(GPD5, NONE, PWROK, NF1), + PAD_CFG_NF(GPD6, NONE, PWROK, NF1), + PAD_CFG_GPO(GPD7, 1, PWROK), + PAD_CFG_NF(GPD8, NONE, PWROK, NF1), + PAD_CFG_GPO(GPD9, 0, PWROK), + PAD_CFG_NF(GPD10, NONE, PWROK, NF1), + PAD_CFG_NF(GPD11, NONE, PWROK, NF1), + + PAD_CFG_NF(GPP_I0, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I1, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I2, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I3, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I4, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I5, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I6, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I7, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I8, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I9, NONE, PLTRST, NF1), + PAD_CFG_NF(GPP_I10, NONE, PLTRST, NF1), +}; + +#endif + +#endif diff --git a/src/mainboard/kontron/bsl6/ramstage.c b/src/mainboard/kontron/bsl6/ramstage.c new file mode 100644 index 0000000..2664a4f --- /dev/null +++ b/src/mainboard/kontron/bsl6/ramstage.c @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <soc/ramstage.h> +#include "gpio.h" + +void mainboard_silicon_init_params(FSP_SIL_UPD *params) +{ + gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table)); +} diff --git a/src/mainboard/kontron/bsl6/romstage.c b/src/mainboard/kontron/bsl6/romstage.c new file mode 100644 index 0000000..9d9169c --- /dev/null +++ b/src/mainboard/kontron/bsl6/romstage.c @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <option.h> +#include <stdint.h> +#include <string.h> +#include <assert.h> +#include <spd_bin.h> +#include <soc/romstage.h> +#include <fsp/soc_binding.h> +#include <pc80/mc146818rtc.h> + +#include "variant.h" + +/* Rcomp resistor */ +static const u16 rcomp_resistors[3] = { 121, 75, 100 }; + +/* Rcomp target */ +static const u16 rcomp_targets[5] = { 50, 26, 20, 20, 26 }; + +void mainboard_memory_init_params(FSPM_UPD *mupd) +{ + FSP_M_CONFIG *const memory_params = &mupd->FspmConfig; + struct spd_block blk = { + .addr_map = { 0x50, 0x52 }, + }; + + assert(sizeof(memory_params->RcompResistor) == sizeof(rcomp_resistors)); + assert(sizeof(memory_params->RcompTarget) == sizeof(rcomp_targets)); + + memory_params->MemorySpdDataLen = CONFIG_DIMM_SPD_SIZE; + get_spd_smbus(&blk); + memory_params->MemorySpdPtr00 = (u32)blk.spd_array[0]; + memory_params->MemorySpdPtr10 = (u32)blk.spd_array[1]; + + memcpy(memory_params->RcompResistor, rcomp_resistors, + sizeof(memory_params->RcompResistor)); + memcpy(memory_params->RcompTarget, rcomp_targets, + sizeof(memory_params->RcompTarget)); + + memory_params->DqPinsInterleaved = true; + + get_option(&memory_params->HyperThreading, "hyper_threading"); + + variant_memory_init_params(mupd); +} diff --git a/src/mainboard/kontron/bsl6/variant.h b/src/mainboard/kontron/bsl6/variant.h new file mode 100644 index 0000000..4f65da5 --- /dev/null +++ b/src/mainboard/kontron/bsl6/variant.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef VARIANT_H +#define VARIANT_H + +#include <fsp/soc_binding.h> + +void variant_memory_init_params(FSPM_UPD *); + +#endif diff --git a/src/mainboard/kontron/bsl6/variants/boxer26/gma-mainboard.ads b/src/mainboard/kontron/bsl6/variants/boxer26/gma-mainboard.ads new file mode 100644 index 0000000..ea4750a --- /dev/null +++ b/src/mainboard/kontron/bsl6/variants/boxer26/gma-mainboard.ads @@ -0,0 +1,13 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := (DP2, HDMI2, others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/kontron/bsl6/variants/boxer26/overridetree.cb b/src/mainboard/kontron/bsl6/variants/boxer26/overridetree.cb new file mode 100644 index 0000000..9dd57e1 --- /dev/null +++ b/src/mainboard/kontron/bsl6/variants/boxer26/overridetree.cb @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only + +chip soc/intel/skylake + + register "SkipExtGfxScan" = "1" + + device domain 0 on + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1f.0 on + chip ec/kontron/kempld + device generic 1.0 on # I2C + chip drivers/i2c/lm96000 + register "vin[1].low" = "1140*100/116" + register "vin[1].high" = "1260*100/116" + register "vin[0].low" = "1810" + register "vin[0].high" = "2000" + register "vin[2].low" = "3140" + register "vin[2].high" = "3470" + register "vin[3].low" = "4750" + register "vin[3].high" = "5250" + register "vin[4].low" = "11400" + register "vin[4].high" = "12600" + + register "fan_in[0].low" = "3240" + register "fan_in[1].low" = "3240" + + register "fan[0].mode" = "LM96000_FAN_MANUAL" + register "fan[0].spinup" = "LM96000_SPINUP_250MS" + register "fan[0].freq" = "LM96000_PWM_25_7KHZ" + register "fan[0].duty_cycle" = "100" + + register "fan[1].mode" = "LM96000_FAN_MANUAL" + register "fan[1].spinup" = "LM96000_SPINUP_250MS" + register "fan[1].freq" = "LM96000_PWM_25_7KHZ" + register "fan[1].duty_cycle" = "100" + + device i2c 0x2c on end + end + chip drivers/secunet/dmi + device i2c 0x57 on end # Serial EEPROM + end + end + end + end # LPC Interface + device pci 1f.4 on + chip drivers/i2c/nct7802y + register "fan[1].mode" = "FAN_MANUAL" + register "fan[1].duty_cycle" = "100" + end + end # SMBus + device pci 1f.5 on end # PCH SPI + device pci 1f.6 on end # GbE # Debug + end +end diff --git a/src/mainboard/kontron/bsl6/variants/boxer26/romstage.c b/src/mainboard/kontron/bsl6/variants/boxer26/romstage.c new file mode 100644 index 0000000..9c14d84 --- /dev/null +++ b/src/mainboard/kontron/bsl6/variants/boxer26/romstage.c @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <option.h> +#include <stdint.h> +#include <console/console.h> +#include <pc80/mc146818rtc.h> +#include <fsp/soc_binding.h> + +#include "../../variant.h" + +void variant_memory_init_params(FSPM_UPD *const mupd) +{ + char nvram_var[] = "ethernetx"; + unsigned int i; + + for (i = 0; i < 3; ++i) { + u8 eth_enable = 1; + nvram_var[sizeof(nvram_var) - 2] = '1' + i; + get_option(ð_enable, nvram_var); + if (!eth_enable) { + printk(BIOS_INFO, "Disabling ethernet%u.\n", 1 + i); + mupd->FspmConfig.PcieRpEnableMask &= ~(1 << (i + 8)); + } + } +} diff --git a/src/mainboard/kontron/bsl6/variants/bsl6/gma-mainboard.ads b/src/mainboard/kontron/bsl6/variants/bsl6/gma-mainboard.ads new file mode 100644 index 0000000..0cf02cd --- /dev/null +++ b/src/mainboard/kontron/bsl6/variants/bsl6/gma-mainboard.ads @@ -0,0 +1,21 @@ +-- SPDX-License-Identifier: GPL-2.0-or-later + +with HW.GFX.GMA; +with HW.GFX.GMA.Display_Probing; + +use HW.GFX.GMA; +use HW.GFX.GMA.Display_Probing; + +private package GMA.Mainboard is + + ports : constant Port_List := + (DP1, + DP2, + DP3, + HDMI1, + HDMI2, + HDMI3, + eDP, + others => Disabled); + +end GMA.Mainboard; diff --git a/src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb b/src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb new file mode 100644 index 0000000..718eff7 --- /dev/null +++ b/src/mainboard/kontron/bsl6/variants/bsl6/overridetree.cb @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only + +chip soc/intel/skylake + # Enable Root port 1..4 (COMe 4..7), 12 (COMe 3) + register "PcieRpEnable[ 0]" = "1" + register "PcieRpEnable[ 1]" = "1" + register "PcieRpEnable[ 2]" = "1" + register "PcieRpEnable[ 3]" = "1" + register "PcieRpEnable[11]" = "1" + + register "usb2_ports[5]" = "USB2_PORT_LONG(OC2)" + register "usb2_ports[6]" = "USB2_PORT_LONG(OC3)" + register "usb2_ports[7]" = "USB2_PORT_LONG(OC3)" + register "usb2_ports[8]" = "USB2_PORT_MID(OC4)" + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" + + register "SataPortsEnable[3]" = "1" + + device domain 0 on + device pci 1c.0 on end # PCI Express Port 1 + device pci 1c.1 on end # PCI Express Port 2 + device pci 1c.2 on end # PCI Express Port 3 + device pci 1c.3 on end # PCI Express Port 4 + device pci 1d.3 on end # PCI Express Port 12 + device pci 1f.4 on + chip drivers/i2c/nct7802y + register "peci[0]" = "{ PECI_DOMAIN_0, 100 }" + register "fan[1].mode" = "FAN_SMART" + register "fan[1].smart.mode" = "SMART_FAN_DUTY" + register "fan[1].smart.tempsrc" = "TEMP_SOURCE_PECI_0" + register "fan[1].smart.table" = "{ { 30, 40 }, + { 40, 48 }, + { 50, 60 }, + { 60, 76 } }" + register "fan[1].smart.critical_temp" = "80" + end + end # SMBus + end +end diff --git a/src/mainboard/kontron/bsl6/variants/bsl6/romstage.c b/src/mainboard/kontron/bsl6/variants/bsl6/romstage.c new file mode 100644 index 0000000..8b32bf5 --- /dev/null +++ b/src/mainboard/kontron/bsl6/variants/bsl6/romstage.c @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <fsp/soc_binding.h> + +#include "../../variant.h" + +void variant_memory_init_params(FSPM_UPD *const mupd) +{ +}