[coreboot-gerrit] Change in coreboot[master]: soc/intel/skl: move UART pad config to boards

[Michael Niewöhner (Code Review)]

Michael Niewöhner has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/48823 )

Change subject: soc/intel/skl: move UART pad config to boards
......................................................................

Patch Set 2:

(1 comment)

https://review.coreboot.org/c/coreboot/+/48823/2/src/mainboard/intel/kblrvp/... 
File src/mainboard/intel/kblrvp/variants/rvp8/include/variant/gpio.h:

https://review.coreboot.org/c/coreboot/+/48823/2/src/mainboard/intel/kblrvp/... 
PS2, Line 166: /* GD_UART2_RXD */	PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),
             : /* GD_UART2_TXD */	PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),
             : 
checked by schematics