Leroy P Leahy (leroy.p.leahy@intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15007
-gerrit
commit b56d6816ac3b13db94fcdde5e6a6a32a53ffa5e6 Author: Lee Leahy leroy.p.leahy@intel.com Date: Mon May 30 14:06:25 2016 -0700
soc/intel/quark: Split I2C out from driver
Split out the I2C code to allow I2C transactions during early romstage.
TEST=Build and run on Galileo Gen2
Change-Id: I87ceb0a8cf660e4337738b3bcde9d4fdeae0159d Signed-off-by: Lee Leahy leroy.p.leahy@intel.com --- src/soc/intel/quark/Makefile.inc | 2 + src/soc/intel/quark/gpio_i2c.c | 152 --------------------------------- src/soc/intel/quark/i2c.c | 176 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 178 insertions(+), 152 deletions(-)
diff --git a/src/soc/intel/quark/Makefile.inc b/src/soc/intel/quark/Makefile.inc index 08325e7..d747079 100644 --- a/src/soc/intel/quark/Makefile.inc +++ b/src/soc/intel/quark/Makefile.inc @@ -18,6 +18,7 @@ ifeq ($(CONFIG_SOC_INTEL_QUARK),y) subdirs-y += romstage subdirs-y += ../../../cpu/x86/tsc
+romstage-y += i2c.c romstage-y += memmap.c romstage-y += reg_access.c romstage-y += tsc_freq.c @@ -27,6 +28,7 @@ ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c ramstage-y += chip.c ramstage-y += ehci.c ramstage-y += gpio_i2c.c +ramstage-y += i2c.c ramstage-y += lpc.c ramstage-y += memmap.c ramstage-y += northcluster.c diff --git a/src/soc/intel/quark/gpio_i2c.c b/src/soc/intel/quark/gpio_i2c.c index d23a905..5580894 100644 --- a/src/soc/intel/quark/gpio_i2c.c +++ b/src/soc/intel/quark/gpio_i2c.c @@ -23,158 +23,6 @@ #include <soc/ramstage.h> #include <soc/reg_access.h>
-static void i2c_disable(I2C_REGS *regs) -{ - uint32_t status; - uint32_t timeout; - - /* Disable I2C controller */ - regs->ic_enable = 0; - - /* Wait for the enable bit to clear */ - timeout = 1 * 1000 * 1000; - status = regs->ic_enable_status; - while (status & IC_ENABLE_CONTROLLER) { - udelay(1); - if (--timeout == 0) - die("ERROR - I2C failed to disable!\n"); - status = regs->ic_enable_status; - } - - /* Clear any pending interrupts */ - status = regs->ic_clr_intr; -} - -int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count) -{ - uint8_t *buffer; - int bytes_transferred; - uint8_t chip; - uint32_t cmd; - int length; - int read_length; - I2C_REGS *regs; - uint32_t status; - uint32_t timeout; - - regs = get_i2c_address(); - - /* Disable the I2C controller to get access to the registers */ - i2c_disable(regs); - - /* Set the slave address */ - ASSERT (count > 0); - ASSERT (segments != NULL); - ASSERT (segments->read == 0); - - /* Clear the start and stop detection */ - status = regs->ic_clr_start_det; - status = regs->ic_clr_stop_det; - - /* Set addressing mode to 7-bit and fast mode */ - cmd = regs->ic_con; - cmd &= ~(IC_CON_10B | IC_CON_SPEED); - cmd |= IC_CON_RESTART_EN | IC_CON_7B | IC_CON_SPEED_100_KHz - | IC_CON_MASTER_MODE; - regs->ic_con = cmd; - - /* Set the target chip address */ - chip = segments->chip; - regs->ic_tar = chip; - - /* Enable the I2C controller */ - regs->ic_enable = IC_ENABLE_CONTROLLER; - - /* Clear the interrupts */ - status = regs->ic_clr_rx_under; - status = regs->ic_clr_rx_over; - status = regs->ic_clr_tx_over; - status = regs->ic_clr_tx_abrt; - - /* Process each of the segments */ - bytes_transferred = 0; - read_length = 0; - buffer = NULL; - while (count-- > 0) { - buffer = segments->buf; - length = segments->len; - ASSERT (buffer != NULL); - ASSERT (length >= 1); - ASSERT (segments->chip = chip); - - if (segments->read) { - /* Place read commands into the FIFO */ - read_length = length; - while (length > 0) { - /* Send stop bit after last byte */ - cmd = IC_DATA_CMD_READ; - if ((count == 0) && (length == 1)) - cmd |= IC_DATA_CMD_STOP; - - /* Place read command in transmit FIFO */ - regs->ic_data_cmd = cmd; - length--; - } - } else { - /* Write the data into the FIFO */ - while (length > 0) { - /* End of the transaction? */ - cmd = IC_DATA_CMD_WRITE | *buffer++; - if ((count == 0) && (length == 1)) - cmd |= IC_DATA_CMD_STOP; - - /* Place a data byte into the FIFO */ - regs->ic_data_cmd = cmd; - length--; - bytes_transferred++; - } - } - segments++; - } - - /* Wait for the end of the transaction */ - timeout = 1 * 1000 * 1000; - do { - status = regs->ic_raw_intr_stat; - if (status & IC_INTR_STOP_DET) - break; - if ((status & (IC_INTR_RX_OVER | IC_INTR_RX_UNDER - | IC_INTR_TX_ABRT | IC_INTR_TX_OVER)) - || (timeout == 0)) { - if (timeout == 0) - printk (BIOS_ERR, - "ERROR - I2C stop bit not received!\n"); - if (status & IC_INTR_RX_OVER) - printk (BIOS_ERR, - "ERROR - I2C receive overrun!\n"); - if (status & IC_INTR_RX_UNDER) - printk (BIOS_ERR, - "ERROR - I2C receive underrun!\n"); - if (status & IC_INTR_TX_ABRT) - printk (BIOS_ERR, - "ERROR - I2C transmit abort!\n"); - if (status & IC_INTR_TX_OVER) - printk (BIOS_ERR, - "ERROR - I2C transmit overrun!\n"); - i2c_disable(regs); - return -1; - } - timeout--; - udelay(1); - } while(1); - - /* Finish reading the data bytes */ - while (read_length > 0) { - status = regs->ic_status; - *buffer++ = (UINT8)regs->ic_data_cmd; - read_length--; - bytes_transferred++; - status = regs->ic_status; - } - - return bytes_transferred; -} - __attribute__((weak)) void mainboard_gpio_i2c_init(device_t dev) { /* Initialize any of the GPIOs or I2C devices */ diff --git a/src/soc/intel/quark/i2c.c b/src/soc/intel/quark/i2c.c new file mode 100644 index 0000000..118cbea --- /dev/null +++ b/src/soc/intel/quark/i2c.c @@ -0,0 +1,176 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <console/console.h> +#include <delay.h> +#include <device/device.h> +#include <device/i2c.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <soc/i2c.h> +#include <soc/ramstage.h> +#include <soc/reg_access.h> + +static void i2c_disable(I2C_REGS *regs) +{ + uint32_t status; + uint32_t timeout; + + /* Disable I2C controller */ + regs->ic_enable = 0; + + /* Wait for the enable bit to clear */ + timeout = 1 * 1000 * 1000; + status = regs->ic_enable_status; + while (status & IC_ENABLE_CONTROLLER) { + udelay(1); + if (--timeout == 0) + die("ERROR - I2C failed to disable!\n"); + status = regs->ic_enable_status; + } + + /* Clear any pending interrupts */ + status = regs->ic_clr_intr; +} + +int platform_i2c_transfer(unsigned bus, struct i2c_seg *segments, int count) +{ + uint8_t *buffer; + int bytes_transferred; + uint8_t chip; + uint32_t cmd; + int length; + int read_length; + I2C_REGS *regs; + uint32_t status; + uint32_t timeout; + + regs = get_i2c_address(); + + /* Disable the I2C controller to get access to the registers */ + i2c_disable(regs); + + /* Set the slave address */ + ASSERT (count > 0); + ASSERT (segments != NULL); + ASSERT (segments->read == 0); + + /* Clear the start and stop detection */ + status = regs->ic_clr_start_det; + status = regs->ic_clr_stop_det; + + /* Set addressing mode to 7-bit and fast mode */ + cmd = regs->ic_con; + cmd &= ~(IC_CON_10B | IC_CON_SPEED); + cmd |= IC_CON_RESTART_EN | IC_CON_7B | IC_CON_SPEED_100_KHz + | IC_CON_MASTER_MODE; + regs->ic_con = cmd; + + /* Set the target chip address */ + chip = segments->chip; + regs->ic_tar = chip; + + /* Enable the I2C controller */ + regs->ic_enable = IC_ENABLE_CONTROLLER; + + /* Clear the interrupts */ + status = regs->ic_clr_rx_under; + status = regs->ic_clr_rx_over; + status = regs->ic_clr_tx_over; + status = regs->ic_clr_tx_abrt; + + /* Process each of the segments */ + bytes_transferred = 0; + read_length = 0; + buffer = NULL; + while (count-- > 0) { + buffer = segments->buf; + length = segments->len; + ASSERT (buffer != NULL); + ASSERT (length >= 1); + ASSERT (segments->chip = chip); + + if (segments->read) { + /* Place read commands into the FIFO */ + read_length = length; + while (length > 0) { + /* Send stop bit after last byte */ + cmd = IC_DATA_CMD_READ; + if ((count == 0) && (length == 1)) + cmd |= IC_DATA_CMD_STOP; + + /* Place read command in transmit FIFO */ + regs->ic_data_cmd = cmd; + length--; + } + } else { + /* Write the data into the FIFO */ + while (length > 0) { + /* End of the transaction? */ + cmd = IC_DATA_CMD_WRITE | *buffer++; + if ((count == 0) && (length == 1)) + cmd |= IC_DATA_CMD_STOP; + + /* Place a data byte into the FIFO */ + regs->ic_data_cmd = cmd; + length--; + bytes_transferred++; + } + } + segments++; + } + + /* Wait for the end of the transaction */ + timeout = 1 * 1000 * 1000; + do { + status = regs->ic_raw_intr_stat; + if (status & IC_INTR_STOP_DET) + break; + if ((status & (IC_INTR_RX_OVER | IC_INTR_RX_UNDER + | IC_INTR_TX_ABRT | IC_INTR_TX_OVER)) + || (timeout == 0)) { + if (timeout == 0) + printk (BIOS_ERR, + "ERROR - I2C stop bit not received!\n"); + if (status & IC_INTR_RX_OVER) + printk (BIOS_ERR, + "ERROR - I2C receive overrun!\n"); + if (status & IC_INTR_RX_UNDER) + printk (BIOS_ERR, + "ERROR - I2C receive underrun!\n"); + if (status & IC_INTR_TX_ABRT) + printk (BIOS_ERR, + "ERROR - I2C transmit abort!\n"); + if (status & IC_INTR_TX_OVER) + printk (BIOS_ERR, + "ERROR - I2C transmit overrun!\n"); + i2c_disable(regs); + return -1; + } + timeout--; + udelay(1); + } while(1); + + /* Finish reading the data bytes */ + while (read_length > 0) { + status = regs->ic_status; + *buffer++ = (UINT8)regs->ic_data_cmd; + read_length--; + bytes_transferred++; + status = regs->ic_status; + } + + return bytes_transferred; +}