Uwe Poeche has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/36642 )
Change subject: drivers/i2c/ptn3460: Provide chip driver for PTN3460 ......................................................................
drivers/i2c/ptn3460: Provide chip driver for PTN3460
This patch provides a chip driver for the DP-2-LVDS bridge PTN3460. The bridge is configured via I2C. As the mainboard has all the information regarding the attached LCD type, there are three hooks into mainboard code to get the information like EDID data and PTN config.
TEST=Display is working on Siemens mainboards (e.g. mc_tcu3, mc_apl1, ...).
Change-Id: Ie4c8176cd16836fa5b8fd2f72faf7a55723b82f6 Signed-off-by: Uwe Poeche uwe.poeche@siemens.com --- A src/drivers/i2c/ptn3460/Kconfig A src/drivers/i2c/ptn3460/Makefile.inc A src/drivers/i2c/ptn3460/chip.h A src/drivers/i2c/ptn3460/ptn3460.c A src/drivers/i2c/ptn3460/ptn3460.h 5 files changed, 223 insertions(+), 0 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/42/36642/1
diff --git a/src/drivers/i2c/ptn3460/Kconfig b/src/drivers/i2c/ptn3460/Kconfig new file mode 100644 index 0000000..6dcdbc0 --- /dev/null +++ b/src/drivers/i2c/ptn3460/Kconfig @@ -0,0 +1,5 @@ +config DRIVERS_I2C_PTN3460 + bool + default n + help + Enable support for external display bridge (eDP to LVDS) PTN3460. diff --git a/src/drivers/i2c/ptn3460/Makefile.inc b/src/drivers/i2c/ptn3460/Makefile.inc new file mode 100644 index 0000000..abe9a05 --- /dev/null +++ b/src/drivers/i2c/ptn3460/Makefile.inc @@ -0,0 +1 @@ +ramstage-$(CONFIG_DRIVERS_I2C_PTN3460) += ptn3460.c diff --git a/src/drivers/i2c/ptn3460/chip.h b/src/drivers/i2c/ptn3460/chip.h new file mode 100644 index 0000000..8bd6d9e --- /dev/null +++ b/src/drivers/i2c/ptn3460/chip.h @@ -0,0 +1,3 @@ +struct drivers_i2c_ptn3460_config { + +}; diff --git a/src/drivers/i2c/ptn3460/ptn3460.c b/src/drivers/i2c/ptn3460/ptn3460.c new file mode 100644 index 0000000..95fbed9 --- /dev/null +++ b/src/drivers/i2c/ptn3460/ptn3460.c @@ -0,0 +1,143 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <console/console.h> +#include <device/i2c_bus.h> +#include <types.h> + +#include "ptn3460.h" + +/** \brief This functions selects one of 7 EDID-tables inside PTN3460 + * which should be emulated on display port and turn emulation ON + * @param *dev Pointer to the relevant I2C controller + * @param edid_num Number of EDID to emulate (0..6) + * @return 0 on success or error code + */ +static int ptn_select_edid(struct device *dev, uint8_t edid_num) +{ + int status = 0; + u8 val; + + if (edid_num > PTN_MAX_EDID_NUM) + return PTN_INVALID_EDID; + /* Enable emulation of the desired EDID table */ + val = (edid_num << 1) | PTN_ENABLE_EMULATION; + status = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + 4, val); + if (status) + return (PTN_BUS_ERROR | status); + else + return PTN_NO_ERROR; +} + +/** \brief This functions writes one EDID data structure to PTN3460 + * @param *dev Pointer to the relevant I2C controller + * @param edid_num Number of EDID that must be written (0..6) + * @param *data Pointer to a buffer where data to write is stored in + * @return 0 on success or error code + */ +static int ptn3460_write_edid(struct device *dev, u8 edid_num, u8 *data) +{ + int status; + int i; + + if (edid_num > PTN_MAX_EDID_NUM) + return PTN_INVALID_EDID; + + /* First enable access to the desired EDID table */ + status = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + 5, edid_num); + if (status) + return (PTN_BUS_ERROR | status); + + /* Now we can simply write EDID-data to ptn3460 */ + for (i = 0; i < PTN_EDID_LEN; i++) { + status = i2c_dev_writeb_at(dev, PTN_EDID_OFF + i, data[i]); + if (status) + return (PTN_BUS_ERROR | status); + } + return PTN_NO_ERROR; +} + +/** \brief This functions sets up the DP2LVDS-converter to be used with the + * appropriate EDID data + * @param *dev Pointer to the I2C controller where PTN3460 is attached + */ +static void ptn3460_init(struct device *dev) +{ + struct ptn_3460_config cfg; + uint8_t edid_data[PTN_EDID_LEN], edid_tab, *ptr = (uint8_t *) &cfg; + int status, i; + + /* Mainboard provides EDID data. */ + if (mb_get_edid(edid_data) != CB_SUCCESS) { + printk(BIOS_ERR, "PTN3460 error: Not able to get EDID data from mainboard.\n"); + return; + } + + /* Mainboard decides which EDID table has to be used. */ + edid_tab = mb_select_edid_table(); + if (edid_tab > PTN_MAX_EDID_NUM) { + printk(BIOS_ERR, "PTN3460 error: invalid EDID table (%d).\n", edid_tab); + return; + } + /* Writing EDID data into PTN. */ + status = ptn3460_write_edid(dev, edid_tab, edid_data); + if (status != PTN_NO_ERROR) { + printk(BIOS_ERR, "PTN3460 error: writing EDID data into device failed.\n"); + return; + } + /* Activate the selected EDID block. */ + ptn_select_edid(dev, edid_tab); + /* Read out PTN configuration data. */ + for (i = 0; i < sizeof(struct ptn_3460_config); i++) { + status = i2c_dev_readb_at(dev, PTN_CONFIG_OFF + i); + if (status < 0) { + printk(BIOS_ERR, "PTN3460 error: Not able to read config data.\n"); + return; + } + *ptr++ = (uint8_t)status; /* fill config structure via ptr */ + } + /* Mainboard can modify the configuration data. + Write back configuration data to PTN3460 if modified by mainboard */ + if (mb_adjust_cfg(&cfg) == PTN_CFG_MODIFIED) { + ptr = (uint8_t *) &cfg; + for (i = 0; i < sizeof(struct ptn_3460_config); i++) { + status = i2c_dev_writeb_at(dev, PTN_CONFIG_OFF + i, *ptr++); + if (status < 0) { + printk(BIOS_ERR, + "PTN3460 error: Not able to write config data.\n"); + return; + } + } + } +} + +static struct device_operations ptn3460_ops = { + .read_resources = DEVICE_NOOP, + .set_resources = DEVICE_NOOP, + .enable_resources = DEVICE_NOOP, + .init = ptn3460_init, + .final = DEVICE_NOOP +}; + +static void ptn3460_enable(struct device *dev) +{ + dev->ops = &ptn3460_ops; +} + +struct chip_operations drivers_i2c_ptn3460_ops = { + CHIP_NAME("PTN3460") + .enable_dev = ptn3460_enable +}; diff --git a/src/drivers/i2c/ptn3460/ptn3460.h b/src/drivers/i2c/ptn3460/ptn3460.h new file mode 100644 index 0000000..3ca0d69 --- /dev/null +++ b/src/drivers/i2c/ptn3460/ptn3460.h @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2019 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _I2C_PTN3460_H_ +#define _I2C_PTN3460_H_ + +#define PTN_EDID_OFF 0x00 +#define PTN_EDID_LEN 0x80 +#define PTN_CONFIG_OFF 0x80 +#define PTN_CONFIG_LEN 0x19 +#define PTN_FLASH_CFG_OFF 0xE8 +#define PTN_FLASH_CFG_LEN 0x04 +#define PTN_MAX_EDID_NUM 6 +#define PTN_ENABLE_EMULATION (1 << 0) + +/* Define some error codes that can be used */ +#define PTN_NO_ERROR 0x00000000 +#define PTN_CFG_MODIFIED 0x00000001 +#define PTN_BUS_ERROR 0x10000000 +#define PTN_INVALID_EDID 0x20000000 +#define PTN_INVALID_EDID_BLOCK 0x30000000 +#define PTN_ERROR 0x40000000 + +struct ptn_3460_config { + u8 dp_interface_ctrl; /* DisplayPort interface control */ + u8 lvds_interface_ctrl1; /* LVDS interface control register 1 */ + u8 lvds_interface_ctrl2; /* LVDS interface control register 2 */ + u8 lvds_interface_ctrl3; /* LVDS interface control register 3 */ + u8 edid_rom_emulation; /* select which EDID-block is emulated */ + u8 edid_rom_access_ctrl; /* select which EDID block to map to 0..0x7F */ + u8 pwm_min[3]; /* smallest PWM frequency for back light */ + u8 pwm_max[3]; /* biggest PWM frequency for back light */ + u8 fast_link_ctrl; /* Fast link training control register */ + u8 pin_cfg_ctrl1; /* Pin configuration control register 1 */ + u8 pin_cfg_ctrl2; /* Pin configuration control register 2 */ + u8 pwm_default; /* Default PWM bit count in DPCD register */ + u16 pwm_value; /* Current PWM bit count in DPCD register */ + u8 pwm_default_freq; /* Default PWM frequency in DPCD register */ + u8 t3_timing; /* Panel T3 timing value */ + u8 t12_timing; /* Panel T12 timing value */ + u8 backlight_ctrl; /* Back light control register */ + u8 t2_delay; /* Panel T2 delay */ + u8 t4_timing; /* Panel T4 timing value */ + u8 t5_delay; /* Panel T5 delay */ +} __packed; + +struct ptn_3460_flash { + u8 cmd; /* Flash command (erase or erase and flash) */ + u16 magic; /* Magic number needed by the flash algorithm */ + u8 trigger; /* Trigger for starting flash operation */ +} __packed; + +/* We need functions which we can call to get mainboard specific data */ +/* This functions can be coded somewhere else but must exist. */ +extern enum cb_err mb_get_edid(uint8_t edid_data[0x80]); +extern uint8_t mb_select_edid_table(void); +extern int mb_adjust_cfg(struct ptn_3460_config *cfg_ptr); + +#endif /* _I2C_PTN3460_H_ */