[coreboot-gerrit] Change in coreboot[master]: soc/sifive/fu540: add code for spi and map flash to memory spaces

[Xiang Wang (Code Review)]

Xiang Wang has posted comments on this change. ( https://review.coreboot.org/c/coreboot/+/33055 )

Change subject: soc/sifive/fu540: add code for spi and map flash to memory spaces
......................................................................

Patch Set 14:

(2 comments)

https://review.coreboot.org/c/coreboot/+/33055/9/src/mainboard/sifive/hifive... 
File src/mainboard/sifive/hifive-unleashed/media.c:

https://review.coreboot.org/c/coreboot/+/33055/9/src/mainboard/sifive/hifive... 
PS9, Line 40: void boot_device_init(void)
> MSEL is only used to determine where ZSBL and FSBL (coreboot) are. […]

Done

https://review.coreboot.org/c/coreboot/+/33055/9/src/mainboard/sifive/hifive... 
PS9, Line 42: 	const static uint8_t reset_en = 0x66;
> This is not to initialize the spi flash, here is to tell the fu540 spi controller how to read the fl […]

Done