Naresh Solanki (naresh.solanki@intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17556
-gerrit
commit b08954b0ae8253f20017089d3de996aeb1619a4e Author: Naresh G Solanki naresh.solanki@intel.com Date: Wed Nov 16 21:40:13 2016 +0530
vendorcode/skykabylake: Update header to fsp v1.4.0
Add header files as is from FSP build output without any adaptations.
Change-Id: Ic4b33c42efe8c9dbe9f9e2b11bf6344c9487d86e Signed-off-by: Rizwan Qureshi rizwan.qureshi@intel.com Signed-off-by: Naresh G Solanki naresh.solanki@intel.com --- .../intel/fsp/fsp2_0/skykabylake/FspUpd.h | 4 +- .../intel/fsp/fsp2_0/skykabylake/FspmUpd.h | 357 +++++++++-------- .../intel/fsp/fsp2_0/skykabylake/FspsUpd.h | 427 +++++++++++---------- 3 files changed, 422 insertions(+), 366 deletions(-)
diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspUpd.h index 8993a00..4981f21 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspUpd.h @@ -35,7 +35,7 @@ are permitted provided that the following conditions are met:
#include <FspEas.h>
-#pragma pack(push, 1) +#pragma pack(1)
#define FSPT_UPD_SIGNATURE 0x545F4450554C424B /* 'KBLUPD_T' */
@@ -43,6 +43,6 @@ are permitted provided that the following conditions are met:
#define FSPS_UPD_SIGNATURE 0x535F4450554C424B /* 'KBLUPD_S' */
-#pragma pack(pop) +#pragma pack()
#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h index d3e5dc6..3e65f0a 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspmUpd.h @@ -35,7 +35,7 @@ are permitted provided that the following conditions are met:
#include <FspUpd.h>
-#pragma pack(push, 1) +#pragma pack(1)
/// @@ -46,7 +46,7 @@ typedef struct { UINT8 Rsvd[3]; UINT16 MeChipInitCrc; UINT16 BiosChipInitCrc; -} CHIPSET_INIT_INFO; +} SI_CHIPSET_INIT_INFO;
/** Fsp M Configuration @@ -142,7 +142,7 @@ typedef struct {
/** Offset 0x0096 **/ - UINT16 UnusedUpdSpace0; + UINT8 UnusedUpdSpace0[2];
/** Offset 0x0098 - Intel Enhanced Debug Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied @@ -170,7 +170,7 @@ typedef struct {
/** Offset 0x00A3 **/ - UINT16 UnusedUpdSpace1; + UINT8 UnusedUpdSpace1[2];
/** Offset 0x00A5 - Enable SMBus Enable/disable SMBus controller. @@ -271,8 +271,9 @@ typedef struct {
/** Offset 0x0178 - Memory Voltage Memory Voltage Override (Vddq). Default = no override - 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 - Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts + 0:Default, 1100:1.10 Volts, 1150:1.15 Volts, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 + Volts, 1350:1.35 Volts, 1400:1.40 Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 + Volts, 1600:1.60 Volts, 1650:1.65 Volts **/ UINT16 VddVoltage;
@@ -300,21 +301,21 @@ typedef struct { **/ UINT8 tCL;
-/** Offset 0x017E - tCWL - Min CAS Write Latency Delay Time, 0: AUTO, max: 20 -**/ - UINT8 tCWL; - -/** Offset 0x017F - tFAW +/** Offset 0x017E - tFAW Min Four Activate Window Delay Time, 0: AUTO, max: 63 **/ UINT16 tFAW;
-/** Offset 0x0181 - tRAS +/** Offset 0x0180 - tRAS RAS Active Time, 0: AUTO, max: 64 **/ UINT16 tRAS;
+/** Offset 0x0182 - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 20 +**/ + UINT8 tCWL; + /** Offset 0x0183 - tRCD/tRP RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 **/ @@ -377,31 +378,37 @@ typedef struct { **/ UINT8 DllBwEn3;
-/** Offset 0x0191 +/** Offset 0x0191 - Command Tristate Support + Enable/Disable Command Tristate; <b>0: Enable</b>; 1: Disable. + $EN_DIS **/ - UINT8 UnusedUpdSpace5[15]; + UINT8 CmdTriStateDis;
-/** Offset 0x01A0 - HECI Timeouts - Enable/Disable. 0: Disable, disable timeout check for HECI, 1: enable - $EN_DIS +/** Offset 0x0192 **/ - UINT8 HeciTimeouts; + UINT8 UnusedUpdSpace5[14];
-/** Offset 0x01A1 - HECI1 BAR address +/** Offset 0x01A0 - HECI1 BAR address BAR address of HECI1 **/ UINT32 Heci1BarAddress;
-/** Offset 0x01A5 - HECI2 BAR address +/** Offset 0x01A4 - HECI2 BAR address BAR address of HECI2 **/ UINT32 Heci2BarAddress;
-/** Offset 0x01A9 - HECI3 BAR address +/** Offset 0x01A8 - HECI3 BAR address BAR address of HECI3 **/ UINT32 Heci3BarAddress;
+/** Offset 0x01AC - HECI Timeouts + Enable/Disable. 0: Disable, disable timeout check for HECI, 1: enable + $EN_DIS +**/ + UINT8 HeciTimeouts; + /** Offset 0x01AD **/ UINT8 UnusedUpdSpace6[115]; @@ -550,57 +557,57 @@ typedef struct { **/ UINT8 DmiGen3RxCtlePeaking[2];
-/** Offset 0x0243 - PEG Gen3 RxCTLEp per-Bundle control +/** Offset 0x0243 - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x0244 - PEG Gen3 RxCTLEp per-Bundle control Range: 0-15, 12 is default for each bundle, must be specified based upon platform design **/ UINT8 PegGen3RxCtlePeaking[8];
-/** Offset 0x024B - Memory data pointer for saved preset search results +/** Offset 0x024C - Memory data pointer for saved preset search results The reference code will store the Gen3 Preset Search results in the SaDataHob's PegData structure (SA_PEG_DATA) and platform code can save/restore this data to skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0 **/ UINT32 PegDataPtr;
-/** Offset 0x024F - PEG PERST# GPIO information +/** Offset 0x0250 - PEG PERST# GPIO information The reference code will use the information in this structure in order to reset PCIe Gen3 devices during equalization, if necessary **/ UINT8 PegGpioData[16];
-/** Offset 0x025F +/** Offset 0x0260 **/ - UINT8 UnusedUpdSpace7; - -/** Offset 0x0260 - DeEmphasis control for DMI - DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB - 0: -6dB, 1: -3.5dB -**/ - UINT8 DmiDeEmphasis; + UINT8 UnusedUpdSpace7[1];
/** Offset 0x0261 - PCIe Hot Plug Enable/Disable per port 0(Default): Disable, 1: Enable **/ UINT8 PegRootPortHPE[3];
-/** Offset 0x0264 - Selection of the primary display device - 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Switchable Graphics - 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Switchable Graphics -**/ - UINT8 PrimaryDisplay; - -/** Offset 0x0265 - Temporary MMIO address for GTTMMADR +/** Offset 0x0264 - Temporary MMIO address for GTTMMADR The reference code will use the information in this structure in order to reset PCIe Gen3 devices during equalization, if necessary **/ UINT32 GttMmAdr;
-/** Offset 0x0269 - Selection of iGFX GTT Memory size +/** Offset 0x0268 - Selection of iGFX GTT Memory size 1=2MB, 2=4MB, 3=8MB, Default is 3 1:2MB, 2:4MB, 3:8MB **/ UINT16 GttSize;
+/** Offset 0x026A - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Switchable Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Switchable Graphics +**/ + UINT8 PrimaryDisplay; + /** Offset 0x026B - Switchable Graphics GPIO information for PEG 0 Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs **/ @@ -715,8 +722,8 @@ typedef struct {
/** Offset 0x02CC - C6DRAM power gating feature This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM - power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating - feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. + power gating feature.- <b>0: Don't allocate any PRMRR memory for C6DRAM power gating + feature</b>.- 1: Allocate PRMRR memory for C6DRAM power gating feature. $EN_DIS **/ UINT8 EnableC6Dram; @@ -817,39 +824,39 @@ typedef struct { **/ UINT8 Avx2RatioOffset;
-/** Offset 0x02DC - BCLK Adaptive Voltage Enable - When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: - Disable;<b> 1: Enable - $EN_DIS -**/ - UINT8 BclkAdaptiveVoltage; - -/** Offset 0x02DD - core voltage override +/** Offset 0x02DC - core voltage override The core voltage override which is applied to the entire range of cpu core frequencies. Valid Range 0 to 2000 0x0:0xFFFF **/ UINT16 CoreVoltageOverride;
-/** Offset 0x02DF - Core Turbo voltage Adaptive +/** Offset 0x02DE - Core Turbo voltage Adaptive Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. Valid Range 0 to 2000 0x0:0xFFFF **/ UINT16 CoreVoltageAdaptive;
-/** Offset 0x02E1 - Core Turbo voltage Offset +/** Offset 0x02E0 - Core Turbo voltage Offset The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 0x0:0xFFFF **/ UINT16 CoreVoltageOffset;
-/** Offset 0x02E3 - Core PLL voltage offset +/** Offset 0x02E2 - Core PLL voltage offset Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 0x0:0xFFFF **/ UINT16 CorePllVoltageOffset;
+/** Offset 0x02E4 - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: + Disable;<b> 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + /** Offset 0x02E5 - BiosGuard Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable $EN_DIS @@ -868,37 +875,37 @@ typedef struct { **/ UINT8 Txt;
-/** Offset 0x02E8 - FlashWearOutProtection - Enable/Disable. 0: Disable, Enable/Disable FlashWearOutProtection feature, 1: enable - $EN_DIS -**/ - UINT8 FlashWearOutProtection; - -/** Offset 0x02E9 - PrmrrSize +/** Offset 0x02E8 - PrmrrSize Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable **/ UINT32 PrmrrSize;
-/** Offset 0x02ED - SinitMemorySize +/** Offset 0x02EC - SinitMemorySize Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable **/ UINT32 SinitMemorySize;
-/** Offset 0x02F1 - TxtHeapMemorySize - Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable -**/ - UINT32 TxtHeapMemorySize; - -/** Offset 0x02F5 - TxtDprMemoryBase +/** Offset 0x02F0 - TxtDprMemoryBase Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable **/ UINT64 TxtDprMemoryBase;
-/** Offset 0x02FD - TxtDprMemorySize +/** Offset 0x02F8 - TxtDprMemorySize Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable **/ UINT32 TxtDprMemorySize;
+/** Offset 0x02FC - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x0300 - FlashWearOutProtection + Enable/Disable. 0: Disable, Enable/Disable FlashWearOutProtection feature, 1: enable + $EN_DIS +**/ + UINT8 FlashWearOutProtection; + /** Offset 0x0301 - ReservedSecurityPreMem Reserved for Security Pre-Mem $EN_DIS @@ -917,26 +924,26 @@ typedef struct { **/ UINT8 PchHpetBdfValid;
-/** Offset 0x030C - PCH HPET Bus Number +/** Offset 0x030C - The HPET Base Address + The HPET base address. Default is 0xFED00000. +**/ + UINT32 PchHpetBase; + +/** Offset 0x0310 - PCH HPET Bus Number Bus Number HPETn used as Requestor / Completer ID. Default is 0xF0. **/ UINT8 PchHpetBusNumber;
-/** Offset 0x030D - PCH HPET Device Number +/** Offset 0x0311 - PCH HPET Device Number Device Number HPETn used as Requestor / Completer ID. Default is 0x1F. **/ UINT8 PchHpetDeviceNumber;
-/** Offset 0x030E - PCH HPET Function Number +/** Offset 0x0312 - PCH HPET Function Number Function Number HPETn used as Requestor / Completer ID. Default is 0x00. **/ UINT8 PchHpetFunctionNumber;
-/** Offset 0x030F - The HPET Base Address - The HPET base address. Default is 0xFED00000. -**/ - UINT32 PchHpetBase; - /** Offset 0x0313 - Enable PCH HSIO PCIE Rx Set Ctle Enable PCH PCIe Gen 3 Set CTLE Value. **/ @@ -1130,105 +1137,121 @@ typedef struct { **/ UINT8 PchNumRsvdSmbusAddresses;
-/** Offset 0x04FB - Point of RsvdSmbusAddressTable +/** Offset 0x04FB +**/ + UINT8 UnusedUpdSpace8; + +/** Offset 0x04FC - Point of RsvdSmbusAddressTable Array of addresses reserved for non-ARP-capable SMBus devices. **/ UINT32 RsvdSmbusAddressTablePtr;
-/** Offset 0x04FF - Trace Hub Memory Region 0 +/** Offset 0x0500 - Trace Hub Memory Region 0 Trace Hub Memory Region 0. **/ UINT32 TraceHubMemReg0Size;
-/** Offset 0x0503 - Trace Hub Memory Region 1 +/** Offset 0x0504 - Trace Hub Memory Region 1 Trace Hub Memory Region 1. **/ UINT32 TraceHubMemReg1Size;
-/** Offset 0x0507 - Enable PCIE RP Mask +/** Offset 0x0508 - Enable PCIE RP Mask Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 for port1, bit1 for port2, and so on. **/ UINT32 PcieRpEnableMask;
-/** Offset 0x050B - SerialIo Uart Debug +/** Offset 0x050C - SerialIo Uart Debug Enable SerialIo Uart debug. 0:Disable, 1:Enable **/ UINT8 PcdSerialDebugEnable;
-/** Offset 0x050C - SerialIo Uart Number Selection +/** Offset 0x050D - SerialIo Uart Number Selection Select SerialIo Uart Controller for debug. 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 **/ UINT8 PcdSerialIoUartNumber;
-/** Offset 0x050D +/** Offset 0x050E - ISA Serial Base selection + Select ISA Serial Base address. + 0(Default):0x3F8, 1:0x2F8 **/ - UINT8 ReservedFspmUpd[34]; + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x050F - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x0510 +**/ + UINT8 ReservedFspmUpd[16]; } FSP_M_CONFIG;
/** Fsp M Test Configuration **/ typedef struct {
-/** Offset 0x052F +/** Offset 0x0520 **/ UINT32 Signature;
-/** Offset 0x0533 - Skip external display device scanning +/** Offset 0x0524 - Skip external display device scanning Enable: Do not scan for external display device, Disable (Default): Scan external display devices $EN_DIS **/ UINT8 SkipExtGfxScan;
-/** Offset 0x0534 - Generate BIOS Data ACPI Table +/** Offset 0x0525 - Generate BIOS Data ACPI Table Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it $EN_DIS **/ UINT8 BdatEnable;
-/** Offset 0x0535 - Detect External Graphics device for LegacyOpROM +/** Offset 0x0526 - Detect External Graphics device for LegacyOpROM Detect and report if external graphics device only support LegacyOpROM or not (to support CSM auto-enable). Enable(Default)=1, Disable=0 $EN_DIS **/ UINT8 ScanExtGfxForLegacyOpRom;
-/** Offset 0x0536 - Lock PCU Thermal Management registers +/** Offset 0x0527 - Lock PCU Thermal Management registers Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 $EN_DIS **/ UINT8 LockPTMregs;
-/** Offset 0x0537 - Enable/Disable DmiVc1 +/** Offset 0x0528 - Enable/Disable DmiVc1 Enable/Disable DmiVc1. Enable = 1, Disable (Default) = 0 $EN_DIS **/ UINT8 DmiVc1;
-/** Offset 0x0538 - Enable/Disable DmiVcm +/** Offset 0x0529 - Enable/Disable DmiVcm Enable/Disable DmiVcm. Enable (Default) = 1, Disable = 0 $EN_DIS **/ UINT8 DmiVcm;
-/** Offset 0x0539 - DMI Max Link Speed +/** Offset 0x052A - DMI Max Link Speed Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 **/ UINT8 DmiMaxLinkSpeed;
-/** Offset 0x053A - DMI Equalization Phase 2 +/** Offset 0x052B - DMI Equalization Phase 2 DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): AUTO - Use the current default method 0:Disable phase2, 1:Enable phase2, 2:Auto **/ UINT8 DmiGen3EqPh2Enable;
-/** Offset 0x053B - DMI Gen3 Equalization Phase3 +/** Offset 0x052C - DMI Gen3 Equalization Phase3 DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static @@ -1238,28 +1261,28 @@ typedef struct { **/ UINT8 DmiGen3EqPh3Method;
-/** Offset 0x053C - Phase2 EQ enable on the PEG 0:1:0. +/** Offset 0x052D - Phase2 EQ enable on the PEG 0:1:0. Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): Enable phase 2, Auto(0x2)(Default): Use the current default method 0:Disable, 1:Enable, 2:Auto **/ UINT8 Peg0Gen3EqPh2Enable;
-/** Offset 0x053D - Phase2 EQ enable on the PEG 0:1:1. +/** Offset 0x052E - Phase2 EQ enable on the PEG 0:1:1. Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): Enable phase 2, Auto(0x2)(Default): Use the current default method 0:Disable, 1:Enable, 2:Auto **/ UINT8 Peg1Gen3EqPh2Enable;
-/** Offset 0x053E - Phase2 EQ enable on the PEG 0:1:2. +/** Offset 0x052F - Phase2 EQ enable on the PEG 0:1:2. Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): Enable phase 2, Auto(0x2)(Default): Use the current default method 0:Disable, 1:Enable, 2:Auto **/ UINT8 Peg2Gen3EqPh2Enable;
-/** Offset 0x053F - Phase3 EQ method on the PEG 0:1:0. +/** Offset 0x0530 - Phase3 EQ method on the PEG 0:1:0. PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static @@ -1269,7 +1292,7 @@ typedef struct { **/ UINT8 Peg0Gen3EqPh3Method;
-/** Offset 0x0540 - Phase3 EQ method on the PEG 0:1:1. +/** Offset 0x0531 - Phase3 EQ method on the PEG 0:1:1. PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static @@ -1279,7 +1302,7 @@ typedef struct { **/ UINT8 Peg1Gen3EqPh3Method;
-/** Offset 0x0541 - Phase3 EQ method on the PEG 0:1:2. +/** Offset 0x0532 - Phase3 EQ method on the PEG 0:1:2. PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static @@ -1289,14 +1312,14 @@ typedef struct { **/ UINT8 Peg2Gen3EqPh3Method;
-/** Offset 0x0542 - Enable/Disable PEG GEN3 Static EQ Phase1 programming +/** Offset 0x0533 - Enable/Disable PEG GEN3 Static EQ Phase1 programming Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming $EN_DIS **/ UINT8 PegGen3ProgramStaticEq;
-/** Offset 0x0543 - PEG Gen3 SwEq Always Attempt +/** Offset 0x0534 - PEG Gen3 SwEq Always Attempt Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default): Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test and generate new EQ values every boot, not recommended @@ -1304,7 +1327,7 @@ typedef struct { **/ UINT8 Gen3SwEqAlwaysAttempt;
-/** Offset 0x0544 - Select number of TxEq presets to test in the PCIe/DMI SwEq +/** Offset 0x0535 - Select number of TxEq presets to test in the PCIe/DMI SwEq Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the current default method (Default)Auto will test Presets 7, 3, and 5. It is possible @@ -1314,7 +1337,7 @@ typedef struct { **/ UINT8 Gen3SwEqNumberOfPresets;
-/** Offset 0x0545 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq +/** Offset 0x0536 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default): Use the current default @@ -1322,7 +1345,7 @@ typedef struct { **/ UINT8 Gen3SwEqEnableVocTest;
-/** Offset 0x0546 - PPCIe Rx Compliance Testing Mode +/** Offset 0x0537 - PPCIe Rx Compliance Testing Mode Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; it should only be set when doing PCIe compliance testing @@ -1330,12 +1353,12 @@ typedef struct { **/ UINT8 PegRxCemTestingMode;
-/** Offset 0x0547 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled +/** Offset 0x0538 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0 **/ UINT8 PegRxCemLoopbackLane;
-/** Offset 0x0548 - Generate PCIe BDAT Margin Table +/** Offset 0x0539 - Generate PCIe BDAT Margin Table Set this policy to enable the generation and addition of PCIe margin data to the BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin data generation, Enable(0x1): Generate PCIe BDAT margin data @@ -1343,7 +1366,11 @@ typedef struct { **/ UINT8 PegGenerateBdatMarginTable;
-/** Offset 0x0549 - PCIe Non-Protocol Awareness for Rx Compliance Testing +/** Offset 0x053A +**/ + UINT8 UnusedUpdSpace9[6]; + +/** Offset 0x0540 - PCIe Non-Protocol Awareness for Rx Compliance Testing Set this policy to enable the generation and addition of PCIe margin data to the BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness, Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for @@ -1352,7 +1379,7 @@ typedef struct { **/ UINT8 PegRxCemNonProtocolAwareness;
-/** Offset 0x054A - PCIe Override RxCTLE +/** Offset 0x0541 - PCIe Override RxCTLE Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE peak values unmodified @@ -1360,7 +1387,7 @@ typedef struct { **/ UINT8 PegGen3RxCtleOverride;
-/** Offset 0x054B - Rsvd +/** Offset 0x0542 - Rsvd Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE peak values unmodified @@ -1368,192 +1395,192 @@ typedef struct { **/ UINT8 PegGen3Rsvd;
-/** Offset 0x054C - PEG Gen3 Root port preset values per lane +/** Offset 0x0543 - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x0544 - PEG Gen3 Root port preset values per lane Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane **/ UINT8 PegGen3RootPortPreset[16];
-/** Offset 0x055C - PEG Gen3 End port preset values per lane +/** Offset 0x0554 - PEG Gen3 End port preset values per lane Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane **/ UINT8 PegGen3EndPointPreset[16];
-/** Offset 0x056C - PEG Gen3 End port Hint values per lane +/** Offset 0x0564 - PEG Gen3 End port Hint values per lane Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane **/ UINT8 PegGen3EndPointHint[16];
-/** Offset 0x057C - Jitter Dwell Time for PCIe Gen3 Software Equalization +/** Offset 0x0574 - Jitter Dwell Time for PCIe Gen3 Software Equalization Range: 0-65535, default is 1000. @warning Do not change from the default **/ UINT16 Gen3SwEqJitterDwellTime;
-/** Offset 0x057E - Jitter Error Target for PCIe Gen3 Software Equalization +/** Offset 0x0576 - Jitter Error Target for PCIe Gen3 Software Equalization Range: 0-65535, default is 1. @warning Do not change from the default **/ UINT16 Gen3SwEqJitterErrorTarget;
-/** Offset 0x0580 - VOC Dwell Time for PCIe Gen3 Software Equalization +/** Offset 0x0578 - VOC Dwell Time for PCIe Gen3 Software Equalization Range: 0-65535, default is 10000. @warning Do not change from the default **/ UINT16 Gen3SwEqVocDwellTime;
-/** Offset 0x0582 - VOC Error Target for PCIe Gen3 Software Equalization +/** Offset 0x057A - VOC Error Target for PCIe Gen3 Software Equalization Range: 0-65535, default is 2. @warning Do not change from the default **/ UINT16 Gen3SwEqVocErrorTarget;
-/** Offset 0x0584 - Panel Power Enable - Control for enabling/disabling VDD force bit (Required only for early enabling of - eDP panel). 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 PanelPowerEnable; - -/** Offset 0x0585 - SaPreMemTestRsvd +/** Offset 0x057C - SaPreMemTestRsvd Reserved for SA Pre-Mem Test $EN_DIS **/ - UINT8 SaPreMemTestRsvd[16]; + UINT8 SaPreMemTestRsvd[4];
-/** Offset 0x0595 - TotalFlashSize - Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable -**/ - UINT16 TotalFlashSize; - -/** Offset 0x0597 - BiosSize - Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable -**/ - UINT16 BiosSize; - -/** Offset 0x0599 - BiosAcmBase +/** Offset 0x0580 - BiosAcmBase Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable **/ UINT64 BiosAcmBase;
-/** Offset 0x05A1 - BiosAcmSize +/** Offset 0x0588 - BiosAcmSize Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable **/ UINT32 BiosAcmSize;
-/** Offset 0x05A5 - TgaSize +/** Offset 0x058C - TgaSize Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable **/ UINT32 TgaSize;
-/** Offset 0x05A9 - TxtLcpPdBase +/** Offset 0x0590 - TxtLcpPdBase Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable **/ UINT64 TxtLcpPdBase;
-/** Offset 0x05B1 - TxtLcpPdSize +/** Offset 0x0598 - TxtLcpPdSize Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable **/ UINT64 TxtLcpPdSize;
-/** Offset 0x05B9 - PCH Dci Enable +/** Offset 0x05A0 - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x05A2 - BiosSize + Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable +**/ + UINT16 BiosSize; + +/** Offset 0x05A4 - PCH Dci Enable Enable/disable PCH Dci. $EN_DIS **/ UINT8 PchDciEn;
-/** Offset 0x05BA - PCH Dci Auto Detect +/** Offset 0x05A5 - PCH Dci Auto Detect Enable/disable PCH Dci AUTO mode. $EN_DIS **/ UINT8 PchDciAutoDetect;
-/** Offset 0x05BB - Smbus dynamic power gating +/** Offset 0x05A6 - Smbus dynamic power gating Disable or Enable Smbus dynamic power gating. $EN_DIS **/ UINT8 SmbusDynamicPowerGating;
-/** Offset 0x05BC - Disable and Lock Watch Dog Register +/** Offset 0x05A7 - Disable and Lock Watch Dog Register Set 1 to clear WDT status, then disable and lock WDT registers. $EN_DIS **/ UINT8 WdtDisableAndLock;
-/** Offset 0x05BD - SMBUS SPD Write Disable +/** Offset 0x05A8 - SMBUS SPD Write Disable Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write Disable bit. For security recommendations, SPD write disable bit must be set. $EN_DIS **/ UINT8 SmbusSpdWriteDisable;
-/** Offset 0x05BE - ChipsetInit HECI message +/** Offset 0x05A9 - ChipsetInit HECI message Enable/Disable. 0: Disable, 1: enable, Enable or disable ChipsetInit HECI message. If disabled, it prevents from sending ChipsetInit HECI message. $EN_DIS **/ UINT8 ChipsetInitMessage;
-/** Offset 0x05BF - Bypass ChipsetInit sync reset. +/** Offset 0x05AA - Bypass ChipsetInit sync reset. 0: disable, 1: enable, Set Enable to bypass the reset after ChipsetInit HECI message. $EN_DIS **/ UINT8 BypassPhySyncReset;
-/** Offset 0x05C0 - Force ME DID Init Status +/** Offset 0x05AB - Force ME DID Init Status Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, 4: Memory not preserved across reset, Set ME DID init stat value $EN_DIS **/ UINT8 DidInitStat;
-/** Offset 0x05C1 - CPU Replaced Polling Disable +/** Offset 0x05AC - CPU Replaced Polling Disable Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop $EN_DIS **/ UINT8 DisableCpuReplacedPolling;
-/** Offset 0x05C2 - ME DID Message +/** Offset 0x05AD - ME DID Message Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent the DID message from being sent) $EN_DIS **/ UINT8 SendDidMsg;
-/** Offset 0x05C3 - Retry mechanism for HECI APIs +/** Offset 0x05AE - Retry mechanism for HECI APIs Test, 0: disable, 1: enable, Enable/Disable HECI retry. $EN_DIS **/ UINT8 DisableHeciRetry;
-/** Offset 0x05C4 - Check HECI message before send +/** Offset 0x05AF - Check HECI message before send Test, 0: disable, 1: enable, Enable/Disable message check. $EN_DIS **/ UINT8 DisableMessageCheck;
-/** Offset 0x05C5 - Skip MBP HOB +/** Offset 0x05B0 - Skip MBP HOB Test, 0: disable, 1: enable, Enable/Disable MOB HOB. $EN_DIS **/ UINT8 SkipMbpHob;
-/** Offset 0x05C6 - HECI2 Interface Communication +/** Offset 0x05B1 - HECI2 Interface Communication Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. $EN_DIS **/ UINT8 HeciCommunication2;
-/** Offset 0x05C7 - Enable KT device +/** Offset 0x05B2 - Enable KT device Test, 0: disable, 1: enable, Enable or Disable KT device. $EN_DIS **/ UINT8 KtDeviceEnable;
-/** Offset 0x05C8 - Enable IDEr +/** Offset 0x05B3 - Enable IDEr Test, 0: disable, 1: enable, Enable or Disable IDEr. $EN_DIS **/ UINT8 IderDeviceEnable;
-/** Offset 0x05C9 +/** Offset 0x05B4 **/ - UINT8 ReservedFspmTestUpd[17]; + UINT8 ReservedFspmTestUpd[12]; } FSP_M_TEST_CONFIG;
/** Fsp M UPD Configuration @@ -1572,19 +1599,19 @@ typedef struct { **/ FSP_M_CONFIG FspmConfig;
-/** Offset 0x052F +/** Offset 0x0520 **/ FSP_M_TEST_CONFIG FspmTestConfig;
-/** Offset 0x05DA +/** Offset 0x05C0 **/ - UINT8 UnusedUpdSpace8[156]; + UINT8 UnusedUpdSpace10[134];
-/** Offset 0x0676 +/** Offset 0x0646 **/ UINT16 UpdTerminator; } FSPM_UPD;
-#pragma pack(pop) +#pragma pack()
#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h index 3748345..0120cf8 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/skykabylake/FspsUpd.h @@ -35,7 +35,7 @@ are permitted provided that the following conditions are met:
#include <FspUpd.h>
-#pragma pack(push, 1) +#pragma pack(1)
#include <ConfigBlock/CpuConfigFspData.h> @@ -170,7 +170,7 @@ typedef struct {
/** Offset 0x0036 **/ - UINT16 UnusedUpdSpace0; + UINT8 UnusedUpdSpace0[2];
/** Offset 0x0038 - MicrocodeRegionBase Memory Base of Microcode Updates @@ -232,25 +232,25 @@ typedef struct {
/** Offset 0x006E **/ - UINT8 UnusedUpdSpace1[1]; + UINT8 UnusedUpdSpace1;
-/** Offset 0x006F - Enable SerialIo Device Mode - 0:Disabled, 1:ACPI Mode, 2:PCI Mode, 3:Hidden mode, 4:Legacy UART mode - Enable/disable - SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5,SPI0,SPI1,UART0,UART1,UART2 device mode - respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. +/** Offset 0x006F - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. **/ - UINT8 SerialIoDevMode[11]; + UINT8 NumOfDevIntConfig;
-/** Offset 0x007A - Address of PCH_DEVICE_INTERRUPT_CONFIG table. +/** Offset 0x0070 - Address of PCH_DEVICE_INTERRUPT_CONFIG table. The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. **/ UINT32 DevIntConfigPtr;
-/** Offset 0x007E - Number of DevIntConfig Entry - Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr - must not be NULL. +/** Offset 0x0074 - Enable SerialIo Device Mode + 0:Disabled, 1:ACPI Mode, 2:PCI Mode, 3:Hidden mode, 4:Legacy UART mode - Enable/disable + SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5,SPI0,SPI1,UART0,UART1,UART2 device mode + respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. **/ - UINT8 NumOfDevIntConfig; + UINT8 SerialIoDevMode[11];
/** Offset 0x007F - PIRQx to IRQx Map Config PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for @@ -425,72 +425,72 @@ typedef struct { **/ UINT8 FwProgress;
-/** Offset 0x0158 - SOL Switch - Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx - $EN_DIS -**/ - UINT8 AmtSolEnabled; - -/** Offset 0x0159 - OS Timer +/** Offset 0x0158 - OS Timer 16 bits Value, Set OS watchdog timer. $EN_DIS **/ UINT16 WatchDogTimerOs;
-/** Offset 0x015B - BIOS Timer +/** Offset 0x015A - BIOS Timer 16 bits Value, Set BIOS watchdog timer. $EN_DIS **/ UINT16 WatchDogTimerBios;
-/** Offset 0x015D +/** Offset 0x015C - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx + $EN_DIS **/ - UINT8 UnusedUpdSpace6[163]; + UINT8 AmtSolEnabled;
-/** Offset 0x0200 - Enable/Disable SA CRID - Enable: SA CRID, Disable (Default): SA CRID - $EN_DIS +/** Offset 0x015D **/ - UINT8 CridEnable; + UINT8 UnusedUpdSpace6[163];
-/** Offset 0x0201 - Subsystem Vendor ID for SA devices +/** Offset 0x0200 - Subsystem Vendor ID for SA devices Subsystem ID that will be programmed to SA devices: Default SubSystemVendorId=0x8086 **/ UINT16 DefaultSvid;
-/** Offset 0x0203 - Subsystem Device ID for SA devices +/** Offset 0x0202 - Subsystem Device ID for SA devices Subsystem ID that will be programmed to SA devices: Default SubSystemId=0x2015 **/ UINT16 DefaultSid;
+/** Offset 0x0204 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + /** Offset 0x0205 - DMI ASPM 0=Disable, 2(Default)=L1 0:Disable, 2:L1 **/ UINT8 DmiAspm;
-/** Offset 0x0206 - PCIe DeEmphasis control per root port +/** Offset 0x0206 - PCIe Physical Slot Number per root port + Physical Slot Number per root port +**/ + UINT16 PegPhysicalSlotNumber[3]; + +/** Offset 0x020C - PCIe DeEmphasis control per root port 0: -6dB, 1(Default): -3.5dB 0:Disable, 2:L1 **/ UINT8 PegDeEmphasis[3];
-/** Offset 0x0209 - PCIe Slot Power Limit value per root port +/** Offset 0x020F - PCIe Slot Power Limit value per root port Slot power limit value per root port **/ UINT8 PegSlotPowerLimitValue[3];
-/** Offset 0x020C - PCIe Slot Power Limit scale per root port +/** Offset 0x0212 - PCIe Slot Power Limit scale per root port Slot power limit scale per root port 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x **/ UINT8 PegSlotPowerLimitScale[3];
-/** Offset 0x020F - PCIe Physical Slot Number per root port - Physical Slot Number per root port -**/ - UINT16 PegPhysicalSlotNumber[3]; - /** Offset 0x0215 - Enable/Disable PavpEnable Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable $EN_DIS @@ -528,14 +528,18 @@ typedef struct { **/ UINT8 X2ApicOptOut;
-/** Offset 0x021B - Base addresses for VT-d function MMIO access +/** Offset 0x021B +**/ + UINT8 UnusedUpdSpace7[1]; + +/** Offset 0x021C - Base addresses for VT-d function MMIO access Base addresses for VT-d MMIO access per VT-d engine **/ UINT32 VtdBaseAddress[2];
-/** Offset 0x0223 +/** Offset 0x0224 **/ - UINT8 UnusedUpdSpace7[20]; + UINT8 UnusedUpdSpace8[19];
/** Offset 0x0237 - SaPostMemProductionRsvd Reserved for SA Post-Mem Production @@ -545,7 +549,7 @@ typedef struct {
/** Offset 0x0247 **/ - UINT8 UnusedUpdSpace8[7]; + UINT8 UnusedUpdSpace9[7];
/** Offset 0x024E - Power State 3 enable/disable PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>. @@ -645,58 +649,62 @@ typedef struct {
/** Offset 0x027D **/ - UINT8 UnusedUpdSpace9[8]; + UINT8 UnusedUpdSpace10[9];
-/** Offset 0x0285 - Thermal Design Current current limit +/** Offset 0x0286 - Thermal Design Current current limit PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes **/ UINT16 TdcPowerLimit[5];
-/** Offset 0x028F +/** Offset 0x0290 **/ - UINT8 UnusedUpdSpace10[10]; + UINT8 UnusedUpdSpace11[8];
-/** Offset 0x0299 - AcLoadline +/** Offset 0x0298 - AcLoadline PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is 0-6249. <b>Intel Recommended Defaults vary by domain and SKU. **/ UINT16 AcLoadline[5];
-/** Offset 0x02A3 - DcLoadline +/** Offset 0x02A2 - DcLoadline PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b> **/ UINT16 DcLoadline[5];
-/** Offset 0x02AD - Power State 1 Threshold current +/** Offset 0x02AC - Power State 1 Threshold current PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. Default Value = 20A. **/ UINT16 Psi1Threshold[5];
-/** Offset 0x02B7 - Power State 2 Threshold current +/** Offset 0x02B6 - Power State 2 Threshold current PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. Default Value = 5A. **/ UINT16 Psi2Threshold[5];
-/** Offset 0x02C1 - Power State 3 Threshold current +/** Offset 0x02C0 - Power State 3 Threshold current PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. Default Value = 1A. **/ UINT16 Psi3Threshold[5];
-/** Offset 0x02CB - Icc Max limit +/** Offset 0x02CA - Icc Max limit PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A **/ UINT16 IccMax[5];
-/** Offset 0x02D5 - VR Voltage Limit +/** Offset 0x02D4 - VR Voltage Limit PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV. **/ UINT16 VrVoltageLimit[5];
+/** Offset 0x02DE +**/ + UINT8 UnusedUpdSpace12; + /** Offset 0x02DF - Disable Fast Slew Rate for Deep Package C States for VR GT domain Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation feature enabled. <b>0: False</b>; 1: True @@ -713,7 +721,7 @@ typedef struct {
/** Offset 0x02E1 **/ - UINT8 UnusedUpdSpace11; + UINT8 UnusedUpdSpace13;
/** Offset 0x02E2 - Enable VR specific mailbox command VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A @@ -730,32 +738,30 @@ typedef struct { **/ UINT8 SendVrMbxCmd1;
-/** Offset 0x02E4 -**/ - UINT8 UnusedUpdSpace12; - -/** Offset 0x02E5 - CpuS3ResumeMtrrData +/** Offset 0x02E4 - CpuS3ResumeMtrrData Pointer CPU S3 Resume MTRR Data **/ UINT32 CpuS3ResumeMtrrData;
-/** Offset 0x02E9 - CpuS3ResumeMtrrDataSize - Size of S3 resume MTRR data. +/** Offset 0x02E8 - Cpu Configuration + Cpu Configuration data. **/ - UINT16 CpuS3ResumeMtrrDataSize; + CPU_CONFIG_FSP_DATA CpuConfig;
-/** Offset 0x02EB +/** Offset 0x02F0 - MicrocodePatchAddress + Pointer to microcode patch that is suitable for this processor. + 0:Disable, 1:Enable **/ - UINT8 UnusedUpdSpace13[2]; + UINT64 MicrocodePatchAddress;
-/** Offset 0x02ED - Cpu Configuration +/** Offset 0x02F8 - CpuS3ResumeMtrrDataSize Size of S3 resume MTRR data. **/ - CPU_CONFIG_FSP_DATA CpuConfig; + UINT16 CpuS3ResumeMtrrDataSize;
-/** Offset 0x02F9 +/** Offset 0x02FA **/ - UINT16 UnusedUpdSpace14; + UINT8 UnusedUpdSpace14;
/** Offset 0x02FB - Enable SkyCam PortA Termination override Enable/disable PortA Termination override. @@ -976,26 +982,26 @@ typedef struct { **/ UINT8 PchHdaDspEndpointBluetooth;
-/** Offset 0x0340 - DSP I2S enablement - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchHdaDspEndpointI2s; - -/** Offset 0x0341 - Bitmask of supported DSP features +/** Offset 0x0340 - Bitmask of supported DSP features [BIT0] - WoV; [BIT1] - BT Sideband; [BIT2] - Codec VAD; [BIT5] - BT Intel HFP; [BIT6] - BT Intel A2DP; [BIT7] - DSP based speech pre-processing disabled; [BIT8] - 0: Intel WoV, 1: Windows Voice Activation. **/ UINT32 PchHdaDspFeatureMask;
-/** Offset 0x0345 - Bitmask of supported DSP Pre/Post-Processing Modules +/** Offset 0x0344 - Bitmask of supported DSP Pre/Post-Processing Modules Deprecated: Specific pre/post-processing module bit position must be coherent with the ACPI implementation: _SB.PCI0.HDAS._DSM Function 3: Query Pre/Post Processing Module Support. **/ UINT32 PchHdaDspPpModuleMask;
+/** Offset 0x0348 - DSP I2S enablement + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchHdaDspEndpointI2s; + /** Offset 0x0349 - Enable PCH Io Apic Set to 1 if BDF value is valid. $EN_DIS @@ -1159,25 +1165,31 @@ typedef struct { **/ UINT8 PchLockDownSpiEiss;
-/** Offset 0x0365 - PCH Sub system vendor ID +/** Offset 0x0365 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x0366 - PCH Sub system vendor ID Default Subsystem Vendor ID of the PCH devices. Default is 0x8086. **/ UINT16 PchSubSystemVendorId;
-/** Offset 0x0367 - PCH Sub system ID +/** Offset 0x0368 - PCH Sub system ID Default Subsystem ID of the PCH devices. Default is 0x7270. **/ UINT16 PchSubSystemId;
-/** Offset 0x0369 - PCH Compatibility Revision ID - This member describes whether or not the CRID feature of PCH should be enabled. +/** Offset 0x036A - PCH Legacy IO Low Latency Enable + todo $EN_DIS **/ - UINT8 PchCrid; + UINT8 PchLegacyIoLowLatency;
-/** Offset 0x036A +/** Offset 0x036B **/ - UINT8 UnusedUpdSpace15[6]; + UINT8 UnusedUpdSpace15[5];
/** Offset 0x0370 - Enable PCIE RP HotPlug Indicate whether the root port is hot plug available. @@ -1350,28 +1362,34 @@ typedef struct { **/ UINT8 PcieComplianceTestMode;
-/** Offset 0x0636 - PCIE Rp Function Swap +/** Offset 0x0636 - PCIE Rp Detect Timeout Ms + Will wait for link to exit Detect state for enabled ports before assuming there + is no device and potentially disabling the port. +**/ + UINT16 PcieDetectTimeoutMs; + +/** Offset 0x0638 - PCIE Rp Function Swap Allows BIOS to use root port function number swapping when root port of function 0 is disabled. $EN_DIS **/ UINT8 PcieRpFunctionSwap;
-/** Offset 0x0637 - PCIE Rp Detect Timeout Ms - Will wait for link to exit Detect state for enabled ports before assuming there - is no device and potentially disabling the port. -**/ - UINT16 PcieDetectTimeoutMs; - /** Offset 0x0639 - PCH Pm PME_B0_S5_DIS When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. $EN_DIS **/ UINT8 PchPmPmeB0S5Dis;
-/** Offset 0x063A +/** Offset 0x063A - PCH Pm Slp S0 Voltage Margining Enable + Indicates platform has support for VCCPrim_Core Voltage Margining in SLP_S0# asserted state. + $EN_DIS +**/ + UINT8 PchPmSlpS0VmEnable; + +/** Offset 0x063B **/ - UINT8 UnusedUpdSpace16[6]; + UINT8 UnusedUpdSpace16[5];
/** Offset 0x0640 - PCH Pm Wol Enable Override Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. @@ -1499,11 +1517,9 @@ typedef struct { **/ UINT8 PchPmPwrCycDur;
-/** Offset 0x065B - PCH Pm Pcie Pll Ssc - Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No - BIOS override. +/** Offset 0x065B **/ - UINT8 PchPmPciePllSsc; + UINT8 UnusedUpdSpace18;
/** Offset 0x065C - PCH Pm WOL_OVR_WK_STS Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. @@ -1575,7 +1591,7 @@ typedef struct {
/** Offset 0x06B0 - PCH Sata Rst Raid Alternate Id Enable RAID Alternate ID. - $EN_DIS + 0:Client, 1:Alternate, 2:Server **/ UINT8 SataRstRaidAlternateId;
@@ -1741,27 +1757,27 @@ typedef struct { **/ UINT8 PchThermalDeviceEnable;
-/** Offset 0x06DC - Thermal Device SMI Enable - This locks down SMI Enable on Alert Thermal Sensor Trip. - $EN_DIS -**/ - UINT8 PchTsmicLock; - -/** Offset 0x06DD - Thermal Throttling Custimized T0Level Value +/** Offset 0x06DC - Thermal Throttling Custimized T0Level Value Custimized T0Level value. **/ UINT16 PchT0Level;
-/** Offset 0x06DF - Thermal Throttling Custimized T1Level Value +/** Offset 0x06DE - Thermal Throttling Custimized T1Level Value Custimized T1Level value. **/ UINT16 PchT1Level;
-/** Offset 0x06E1 - Thermal Throttling Custimized T2Level Value +/** Offset 0x06E0 - Thermal Throttling Custimized T2Level Value Custimized T2Level value. **/ UINT16 PchT2Level;
+/** Offset 0x06E2 - Thermal Device SMI Enable + This locks down SMI Enable on Alert Thermal Sensor Trip. + $EN_DIS +**/ + UINT8 PchTsmicLock; + /** Offset 0x06E3 - Enable The Thermal Throttle Enable the thermal throttle function. $EN_DIS @@ -1946,7 +1962,7 @@ typedef struct {
/** Offset 0x0720 **/ - UINT32 UnusedUpdSpace18; + UINT8 UnusedUpdSpace19[4];
/** Offset 0x0724 - Pch PCIE device override table pointer The PCIe device table is being used to override PCIe device ASPM settings. This @@ -1964,130 +1980,144 @@ typedef struct { **/ UINT8 EnableTcoTimer;
-/** Offset 0x0729 - BgpdtHash[4] - BgpdtHash values +/** Offset 0x0729 - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC **/ - UINT64 BgpdtHash[4]; + UINT8 EcCmdProvisionEav;
-/** Offset 0x0749 - BiosGuardAttr - BiosGuardAttr default values +/** Offset 0x072A - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously **/ - UINT32 BiosGuardAttr; + UINT8 EcCmdLock;
-/** Offset 0x074D - BiosGuardModulePtr - BiosGuardModulePtr default values +/** Offset 0x072B **/ - UINT64 BiosGuardModulePtr; + UINT8 UnusedUpdSpace20[5];
-/** Offset 0x0755 - SendEcCmd +/** Offset 0x0730 - SendEcCmd SendEcCmd function pointer. \n @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode **/ UINT64 SendEcCmd;
-/** Offset 0x075D - EcCmdProvisionEav - Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +/** Offset 0x0738 - BgpdtHash[4] + BgpdtHash values **/ - UINT8 EcCmdProvisionEav; + UINT64 BgpdtHash[4];
-/** Offset 0x075E - EcCmdLock - EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +/** Offset 0x0758 - BiosGuardModulePtr + BiosGuardModulePtr default values **/ - UINT8 EcCmdLock; + UINT64 BiosGuardModulePtr; + +/** Offset 0x0760 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr;
-/** Offset 0x075F - SgxEpoch0 +/** Offset 0x0764 - SgxSinitNvsData + SgxSinitNvsData default values +**/ + UINT8 SgxSinitNvsData; + +/** Offset 0x0765 +**/ + UINT8 UnusedUpdSpace21[3]; + +/** Offset 0x0768 - SgxEpoch0 SgxEpoch0 default values **/ UINT64 SgxEpoch0;
-/** Offset 0x0767 - SgxEpoch1 +/** Offset 0x0770 - SgxEpoch1 SgxEpoch1 default values **/ UINT64 SgxEpoch1;
-/** Offset 0x076F - SgxSinitNvsData - SgxSinitNvsData default values +/** Offset 0x0778 - Enable/Disable ME Unconfig on RTC clear + Enable(Default): Enable ME Unconfig On Rtc Clear, Disable: Disable ME Unconfig On Rtc Clear + $EN_DIS **/ - UINT8 SgxSinitNvsData; + UINT8 MeUnconfigOnRtcClear;
-/** Offset 0x0770 +/** Offset 0x0779 **/ - UINT8 ReservedFspsUpd[13]; + UINT8 ReservedFspsUpd[7]; } FSP_S_CONFIG;
/** Fsp S Test Configuration **/ typedef struct {
-/** Offset 0x077D +/** Offset 0x0780 **/ UINT32 Signature;
-/** Offset 0x0781 - Enable/Disable Device 7 +/** Offset 0x0784 - Enable/Disable Device 7 Enable: Device 7 enabled, Disable (Default): Device 7 disabled $EN_DIS **/ UINT8 ChapDeviceEnable;
-/** Offset 0x0782 - Skip PAM regsiter lock +/** Offset 0x0785 - Skip PAM regsiter lock Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): PAM registers will be locked by RC $EN_DIS **/ UINT8 SkipPamLock;
-/** Offset 0x0783 - EDRAM Test Mode +/** Offset 0x0786 - EDRAM Test Mode Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): PAM registers will be locked by RC 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode **/ UINT8 EdramTestMode;
-/** Offset 0x0784 - DMI Extended Sync Control +/** Offset 0x0787 - DMI Extended Sync Control Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended Sync Control $EN_DIS **/ UINT8 DmiExtSync;
-/** Offset 0x0785 - DMI IOT Control +/** Offset 0x0788 - DMI IOT Control Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control $EN_DIS **/ UINT8 DmiIot;
-/** Offset 0x0786 - PEG Max Payload size per root port +/** Offset 0x0789 - PEG Max Payload size per root port 0xFF(Default):Auto, 0x1: Force 128B, 0X2: Force 256B 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B **/ UINT8 PegMaxPayload[3];
-/** Offset 0x0789 - Enable/Disable IGFX RenderStandby +/** Offset 0x078C - Enable/Disable IGFX RenderStandby Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby $EN_DIS **/ UINT8 RenderStandby;
-/** Offset 0x078A - Enable/Disable IGFX PmSupport +/** Offset 0x078D - Enable/Disable IGFX PmSupport Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport $EN_DIS **/ UINT8 PmSupport;
-/** Offset 0x078B - Enable/Disable CdynmaxClamp +/** Offset 0x078E - Enable/Disable CdynmaxClamp Enable(Default): Enable CdynmaxClamp, Disable: Disable CdynmaxClamp $EN_DIS **/ UINT8 CdynmaxClampEnable;
-/** Offset 0x078C - Disable VT-d +/** Offset 0x078F - Disable VT-d 0=Enable/FALSE(VT-d disabled), 1=Disable/TRUE (VT-d enabled) $EN_DIS **/ UINT8 VtdDisable;
-/** Offset 0x078D - GT Frequency Limit +/** Offset 0x0790 - GT Frequency Limit 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, @@ -2101,15 +2131,11 @@ typedef struct { **/ UINT8 GtFreqMax;
-/** Offset 0x078E - SaPostMemTestRsvd +/** Offset 0x0791 - SaPostMemTestRsvd Reserved for SA Post-Mem Test $EN_DIS **/ - UINT8 SaPostMemTestRsvd[12]; - -/** Offset 0x079A -**/ - UINT16 UnusedUpdSpace19; + UINT8 SaPostMemTestRsvd[11];
/** Offset 0x079C - 1-Core Ratio Limit 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused @@ -2145,7 +2171,7 @@ typedef struct {
/** Offset 0x07A0 **/ - UINT8 UnusedUpdSpace20; + UINT8 UnusedUpdSpace22;
/** Offset 0x07A1 - Enable or Disable HWP Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b> @@ -2323,7 +2349,7 @@ typedef struct {
/** Offset 0x07BC **/ - UINT16 UnusedUpdSpace21; + UINT8 UnusedUpdSpace23[2];
/** Offset 0x07BE - Enable or Disable MLC Streamer Prefetcher Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. @@ -2375,7 +2401,7 @@ typedef struct {
/** Offset 0x07C6 **/ - UINT16 UnusedUpdSpace22; + UINT8 UnusedUpdSpace24[2];
/** Offset 0x07C8 - Control on Processor Trace output scheme Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. @@ -2390,17 +2416,20 @@ typedef struct { UINT8 ProcTraceEnable;
/** Offset 0x07CA - Memory region allocation for Processor Trace - Memory region allocation for Processor Trace, Valid Values are 0 - 4KB , 0x1 - 8KB - , 0x2 - 16KB , 0x3 - 32KB , 0x4 - 64KB , 0x5 - 128KB , 0x6 - 256KB , 0x7 - 512KB - , 0x8 - 1MB , 0x9 - 2MB , 0xA - 4MB , 0xB - 8MB , 0xC - 16MB , 0xD - 32MB , 0xE - - 64MB , 0xF - 128MB , 0xFF: Disable + Memory region allocation for Processor Trace, Total Memory required is up to requested + value * 2 (for memory alignment) * 8 active threads, to enable Processor Trace, + PcdFspReservedMemoryLength must be increased by the total memory required, and + PlatformMemorySize policy must also be increased by the total memory required over + 32MB, Valid Values are 0 - 4KB , 0x1 - 8KB , 0x2 - 16KB , 0x3 - 32KB , 0x4 - 64KB + , 0x5 - 128KB , 0x6 - 256KB , 0x7 - 512KB , 0x8 - 1MB , 0x9 - 2MB , 0xA - 4MB , + 0xB - 8MB , 0xC - 16MB , 0xD - 32MB , 0xE - 64MB , 0xF - 128MB , 0xFF: Disable 0x0:0xFF **/ UINT8 ProcTraceMemSize;
/** Offset 0x07CB **/ - UINT8 UnusedUpdSpace23; + UINT8 UnusedUpdSpace25;
/** Offset 0x07CC - Enable or Disable Voltage Optimization feature Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b> @@ -2588,160 +2617,160 @@ typedef struct { **/ UINT8 ConfigTdpLevel;
-/** Offset 0x07E9 - Max P-State Ratio +/** Offset 0x07E9 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. (RTH is controlled + through MSR 1FC bit 20)Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x07EA - Max P-State Ratio Max P-State Ratio , Valid Range 0 to 0x7F 0x0:0xFFFF **/ UINT16 MaxRatio;
-/** Offset 0x07EB - Maximum P-state ratio to use in the custom P-state table +/** Offset 0x07EC - Maximum P-state ratio to use in the custom P-state table Maximum P-state ratio to use in the custom P-state table. NumOfCustomPStates has valid range between 0 to 40. For no. of P-States supported(NumOfCustomPStates) , StateRatio[NumOfCustomPStates] are configurable. Valid Range of value is 0 to 0x7F **/ UINT16 StateRatio[40];
-/** Offset 0x083B - Platform Power Pmax - PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. - Range 0-1024 Watts. Value of 800 = 100W - 0x0:0xFFFF -**/ - UINT16 PsysPmax; - -/** Offset 0x083D - Interrupt Response Time Limit of C-State LatencyContol0 +/** Offset 0x083C - Interrupt Response Time Limit of C-State LatencyContol0 Interrupt Response Time Limit of C-State LatencyContol0. Range of value 0 to 0x3FF 0x0:0xFFFF **/ UINT16 CstateLatencyControl0Irtl;
-/** Offset 0x083F - Interrupt Response Time Limit of C-State LatencyContol1 +/** Offset 0x083E - Interrupt Response Time Limit of C-State LatencyContol1 Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF 0x0:0xFFFF **/ UINT16 CstateLatencyControl1Irtl;
-/** Offset 0x0841 - Interrupt Response Time Limit of C-State LatencyContol2 +/** Offset 0x0840 - Interrupt Response Time Limit of C-State LatencyContol2 Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF 0x0:0xFFFF **/ UINT16 CstateLatencyControl2Irtl;
-/** Offset 0x0843 - Interrupt Response Time Limit of C-State LatencyContol3 +/** Offset 0x0842 - Interrupt Response Time Limit of C-State LatencyContol3 Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF 0x0:0xFFFF **/ UINT16 CstateLatencyControl3Irtl;
-/** Offset 0x0845 - Interrupt Response Time Limit of C-State LatencyContol4 +/** Offset 0x0844 - Interrupt Response Time Limit of C-State LatencyContol4 Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF 0x0:0xFFFF **/ UINT16 CstateLatencyControl4Irtl;
-/** Offset 0x0847 - Interrupt Response Time Limit of C-State LatencyContol5 +/** Offset 0x0846 - Interrupt Response Time Limit of C-State LatencyContol5 Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF 0x0:0xFFFF **/ UINT16 CstateLatencyControl5Irtl;
-/** Offset 0x0849 - Package Long duration turbo mode power limit +/** Offset 0x0848 - Package Long duration turbo mode power limit Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 PowerLimit1;
-/** Offset 0x084D - Package Short duration turbo mode power limit +/** Offset 0x084C - Package Short duration turbo mode power limit Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 PowerLimit2Power;
-/** Offset 0x0851 - Package PL3 power limit +/** Offset 0x0850 - Package PL3 power limit Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 PowerLimit3;
-/** Offset 0x0855 - Package PL4 power limit +/** Offset 0x0854 - Package PL4 power limit Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 PowerLimit4;
-/** Offset 0x0859 - Tcc Offset Time Window for RATL +/** Offset 0x0858 - Tcc Offset Time Window for RATL Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 TccOffsetTimeWindowForRatl;
-/** Offset 0x085D - Short term Power Limit value for custom cTDP level 1 +/** Offset 0x085C - Short term Power Limit value for custom cTDP level 1 Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 Custom1PowerLimit1;
-/** Offset 0x0861 - Long term Power Limit value for custom cTDP level 1 +/** Offset 0x0860 - Long term Power Limit value for custom cTDP level 1 Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 Custom1PowerLimit2;
-/** Offset 0x0865 - Short term Power Limit value for custom cTDP level 2 +/** Offset 0x0864 - Short term Power Limit value for custom cTDP level 2 Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 Custom2PowerLimit1;
-/** Offset 0x0869 - Long term Power Limit value for custom cTDP level 2 +/** Offset 0x0868 - Long term Power Limit value for custom cTDP level 2 Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 Custom2PowerLimit2;
-/** Offset 0x086D - Short term Power Limit value for custom cTDP level 3 +/** Offset 0x086C - Short term Power Limit value for custom cTDP level 3 Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 Custom3PowerLimit1;
-/** Offset 0x0871 - Long term Power Limit value for custom cTDP level 3 +/** Offset 0x0870 - Long term Power Limit value for custom cTDP level 3 Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 Custom3PowerLimit2;
-/** Offset 0x0875 - Platform PL1 power +/** Offset 0x0874 - Platform PL1 power Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 PsysPowerLimit1Power;
-/** Offset 0x0879 - Platform PL2 power +/** Offset 0x0878 - Platform PL2 power Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range 0 to 4095875 in Step size of 125 0x0:0xFFFFFFFF **/ UINT32 PsysPowerLimit2Power;
-/** Offset 0x087D - Race To Halt - Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency - in order to enter pkg C-State faster to reduce overall power. (RTH is controlled - through MSR 1FC bit 20)Disable; <b>1: Enable</b> - $EN_DIS +/** Offset 0x087C - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W + 0x0:0xFFFF **/ - UINT8 RaceToHalt; + UINT16 PsysPmax;
/** Offset 0x087E - ReservedCpuPostMemTest Reserved for CPU Post-Mem Test @@ -2768,17 +2797,17 @@ typedef struct { **/ UINT8 DisableD0I3SettingForHeci;
-/** Offset 0x088D - HD Audio Reset Wait Timer - The delay timer after Azalia reset, the value is number of microseconds. Default is 600. -**/ - UINT16 PchHdaResetWaitTimer; - -/** Offset 0x088F - Enable LOCKDOWN SMI +/** Offset 0x088D - Enable LOCKDOWN SMI Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. $EN_DIS **/ UINT8 PchLockDownGlobalSmi;
+/** Offset 0x088E - HD Audio Reset Wait Timer + The delay timer after Azalia reset, the value is number of microseconds. Default is 600. +**/ + UINT16 PchHdaResetWaitTimer; + /** Offset 0x0890 - Enable LOCKDOWN BIOS Interface Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. $EN_DIS @@ -2911,19 +2940,19 @@ typedef struct { **/ FSP_S_CONFIG FspsConfig;
-/** Offset 0x077D +/** Offset 0x0780 **/ FSP_S_TEST_CONFIG FspsTestConfig;
/** Offset 0x0A40 **/ - UINT8 UnusedUpdSpace24[474]; + UINT8 UnusedUpdSpace26[470];
-/** Offset 0x0C1A +/** Offset 0x0C16 **/ UINT16 UpdTerminator; } FSPS_UPD;
-#pragma pack(pop) +#pragma pack()
#endif